Revision notes

Chapter 10 Sound Waves: Characteristics and Applications: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

How sound is produced and why it needs a medium

Sound is produced by vibrating objects. When the vibration stops, the sound stops.

— Key idea
Vibrating parts of some common sources of sound
SourceWhat vibratesHow it is made to vibrate
Human voiceVocal cords in the larynxAir from the lungs
Sitar, veena, violinStretched strings (and the body)Plucking or bowing
Tabla, dholak, mridangamStretched membrane (drum skin)Striking with fingers or palm
Bansuri (flute), shehnaiColumn of air inside the pipeBlowing
Manjira, ghanta (bell)The metal body itselfStriking
Cricket (insect)Wings or legsRubbing them together

The vacuum bell-jar experiment

  1. Bell rings inside a sealed jar The sound is heard clearly through the air in the jar.
  2. Air is pumped out The sound becomes fainter and fainter.
  3. Near-vacuum reached The bell is seen ringing but almost nothing is heard.
  4. Air is let back in The sound slowly returns to its first loudness.
Removing the medium removes the sound, even though the bell keeps vibrating.

Key takeaways: sound is produced by vibrating objects; the voice comes from vibrating vocal cords; instruments use strings, membranes, air columns or metal bodies; sound travels through solids, liquids and gases (all called media) but not through a vacuum.

Read the full lesson

Lesson 2

Sound as a longitudinal wave: compressions and rarefactions

One vibration of a source in air

  1. Source moves forward Air ahead is squeezed: a compression forms.
  2. Compression passes on Particles push their neighbours and return to place.
  3. Source moves back Air near it spreads out: a rarefaction forms.
  4. Rarefaction passes on The next forward movement starts a new compression.

Then back to step 1: Source moves forward

Each to-and-fro movement of the source sends out one compression and one rarefaction.

A sound wave is a series of compressions and rarefactions travelling through a medium. The particles of the medium only vibrate about their mean positions; they do not travel with the wave.

— Definition

Two kinds of wave motion

  • Longitudinal wave
    • Particles vibrate parallel to the direction the wave travels
    • Made of compressions and rarefactions
    • Example: sound
    • Some earthquake waves are longitudinal
  • Transverse wave
    • Particles vibrate at right angles (perpendicular) to the direction of travel
    • Made of humps and dips
    • Example: a wave flicked along a rope
    • Light is also a transverse wave
Part of the waveDensity of mediumOn the graph
CompressionHigher than averageCrest (peak) at the centre
RarefactionLower than averageTrough (dip) at the centre
Between themEqual to averageWhere the curve crosses the dashed line

Key takeaways: sound travels as compressions (high density) and rarefactions (low density); particles only vibrate about mean positions while energy moves on; sound is a longitudinal, mechanical wave; on a density-distance graph, crests are compressions and troughs are rarefactions.

Read the full lesson

Lesson 3

Wavelength, frequency, time period, amplitude and speed of sound

T × ν = 1, so T = 1 ÷ ν and ν = 1 ÷ T. A shorter time period means a higher frequency.

— Equation 1

Speed = wavelength × frequency, that is, v = λ × ν

— Equation 2 (the wave equation)

Linking the quantities of a sound wave

  • Time period T (s)
    • T = 1 ÷ ν
    • Time for one oscillation
  • Frequency ν (Hz)
    • ν = 1 ÷ T
    • Oscillations per second
  • Wavelength λ (m)
    • λ = v ÷ ν
    • Crest to next crest
  • Speed v (m s⁻¹)
    • v = λ × ν
    • Depends on the medium
Approximate values used in this lesson
StateMedium (at about 15 °C)Approximate speed of sound
SolidSteel5000 m s⁻¹
LiquidWater1500 m s⁻¹
GasAir340 m s⁻¹

Key takeaways: wavelength is crest-to-crest distance (m); frequency is oscillations per second (Hz); time period is the time for one oscillation (s); T × ν = 1 and v = λ × ν; larger amplitude means more energy; intensity falls with distance; sound is fastest in solids and slowest in gases, and faster in warmer air.

Read the full lesson

Lesson 4

Pitch, loudness, audible range and musical sound

Physical quantity and what we hear

  • Frequency
    • Measured in hertz (Hz)
    • Heard as pitch
    • Higher frequency: shriller sound
  • Amplitude
    • Largest change in density
    • Heard as loudness
    • Larger amplitude: louder sound

Infrasonic: below 20 Hz. Audible: 20 Hz to 20 kHz. Ultrasonic: above 20 kHz.

— Ranges to remember

How we hear

  1. Sound enters the ear Compressions and rarefactions travel down the ear canal.
  2. Eardrum vibrates A thin membrane moves in and out with the wave.
  3. Tiny bones amplify Three small bones make the vibrations stronger.
  4. Cochlea converts The vibrations become electrical signals.
  5. Brain interprets The signals are perceived as sound.

Key takeaways: pitch depends on frequency and loudness on amplitude; humans hear about 20 Hz to 20 kHz; below is infrasonic, above is ultrasonic; noise can damage hearing; a note is a fundamental plus overtones, timbre is an instrument's sound quality, and an octave doubles the frequency.

Read the full lesson

Lesson 5

Reflection of sound: echo, reverberation, ultrasound and sonar

To hear an echo, the reflected sound must arrive at least 0.1 s after the original. For any echo: distance to the surface = (speed × total time) ÷ 2.

— Echo rule

Echo and reverberation

  • Echo
    • One clear repeat of a sound
    • Reflection arrives 0.1 s or more later
    • Needs a distant hard surface (at least about 17 m)
    • Example: shouting at a hill
  • Reverberation
    • Sound lingers and blurs
    • Many reflections arrive less than 0.1 s apart
    • Happens in large closed halls
    • Reduced by soft, absorbing materials
Applications of sound outside the audible range
WaveUses
Ultrasonic (above 20 kHz)Imaging organs inside the body without surgery (ultrasonography); breaking kidney stones into small pieces; cleaning delicate machine parts and ultrasonic welding; finding hidden cracks inside metal blocks; locating objects by their echoes
Infrasonic (below 20 Hz)Detecting earthquakes and volcanic eruptions; detecting severe storms, because infrasound travels long distances through air and the ground

How sonar finds depth

  1. Transmitter sends a pulse Ultrasound goes down into the sea.
  2. Pulse reflects It bounces off the seabed or an object.
  3. Receiver detects the echo The time from sending to receiving is measured.
  4. Depth is calculated Depth = speed of sound in water × time ÷ 2.

Key takeaways: sound reflects by the same laws as light; an echo needs a gap of at least 0.1 s, so a reflector at least about 17 m away in air; reverberation is lingering sound from many quick reflections; for echoes, distance = speed × time ÷ 2; ultrasound is used in medicine, industry, echolocation and sonar, and infrasound in detecting earthquakes and storms.

Read the full lesson

Privacy · Terms · Refunds · Delivery