- Practice
- About 14 min
- 5 practice questions
Equivalents, normality and back-titration problems
Use equivalent mass and normality to handle acids and bases with more than one replaceable H or OH, and solve back-titration percentage-purity questions.
If something looks wrong, please tell us.
Mole-ratio methods always work, but exam papers also use equivalents and normality because they shorten acid-base arithmetic. The same lesson covers back titration, the method for measuring something that does not dissolve or react quickly enough for a direct titration, such as an impure limestone sample.
Equivalents and normality
The n-factor (or the equivalent count) of an acid is the number of H+ ions it gives in the reaction (its basicity); for a base it is the number of OH- ions (its acidity). Equivalent mass = molar mass / n-factor. Normality (N) is the number of equivalents per litre, so N = M x n-factor. The great advantage is that one equivalent of an acid always neutralises exactly one equivalent of a base, so for any neutralisation:
N1 x V1 = N2 x V2 at the end point, whatever the formulas are. Compare with M1V1 = M2V2, which holds only if the ratio is 1 : 1.
| Substance | Molar mass (g/mol) | n-factor | Equivalent mass (g/eq) |
|---|---|---|---|
| HCl | 36.5 | 1 | 36.5 |
| H2SO4 | 98 | 2 | 49 |
| NaOH | 40 | 1 | 40 |
| Ca(OH)2 | 74 | 2 | 37 |
| Na2CO3 (to CO2 and water) | 106 | 2 | 53 |
Back titration
In a back titration an excess of a standard reagent is added to the sample. After the reaction, the leftover reagent is titrated against a second standard solution. Moles used up by the sample = total moles added - moles left over.
Worked examples
Example 1. 25 mL of 0.2 M H2SO4 is neutralised by 0.1 M Ba(OH)2. What volume of the base is needed? Working: N of acid = 0.2 x 2 = 0.4 N. N of base = 0.1 x 2 = 0.2 N. 0.4 x 25 = 0.2 x V, so V = 10 / 0.2 = 50 mL.
Example 2. 0.63 g of oxalic acid dihydrate, H2C2O4.2H2O (molar mass 126 g/mol, dibasic), is dissolved to make 100 mL of solution. Find its normality and the volume of 0.08 M NaOH needed for 20 mL of it. Working: moles = 0.63 / 126 = 0.005 mol; equivalents = 0.005 x 2 = 0.010. N = 0.010 / 0.100 L = 0.1 N. Then 0.1 x 20 = 0.08 x V, so V = 2.0 / 0.08 = 25 mL.
Example 3 (back titration). 1.0 g of an impure limestone sample (CaCO3) is treated with 50 mL of 0.5 M HCl. The excess acid needs 20 mL of 0.5 M NaOH. Find the percentage of CaCO3. (CaCO3 = 100 g/mol.) Working: HCl added = 0.5 x 50 = 25 mmol. Excess HCl = NaOH used = 0.5 x 20 = 10 mmol. HCl that reacted with CaCO3 = 25 - 10 = 15 mmol. CaCO3 + 2HCl gives CaCl2 + H2O + CO2, so CaCO3 = 15 / 2 = 7.5 mmol = 0.0075 mol. Mass = 0.0075 x 100 = 0.75 g. Percentage = 0.75 / 1.0 x 100 = 75 per cent.
Example 4. What mass of NaOH is needed to neutralise 0.5 equivalent of an acid? Working: one equivalent of NaOH is 40 g, so 0.5 equivalent is 20 g.
Traps
- Using M1V1 = M2V2 for H2SO4 with NaOH. Use normality, or write the mole ratio 1 : 2.
- Forgetting the 1 : 2 ratio of CaCO3 to HCl in a back titration.
- Treating the n-factor as fixed for a substance. It depends on the reaction; Na2CO3 has n-factor 2 when it goes to CO2, but only 1 if it stops at NaHCO3.
Key takeaways
- N = M x n-factor, and N1V1 = N2V2 at the end point.
- Equivalent mass = molar mass / n-factor.
- Back titration: used up = added - left over.
Check your understanding
-
1. What is the normality of 0.05 M H2SO4 in complete neutralisation?
- 0.025 N
- 0.05 N
- 0.10 N
- 0.20 N
Show answer
Answer: C. n-factor of H2SO4 is 2, so N = 0.05 x 2 = 0.10 N.
-
2. The equivalent mass of Ca(OH)2 (molar mass 74) in neutralisation is:
- 74
- 37
- 148
- 24.7
Show answer
Answer: B. Ca(OH)2 gives two OH-, so its n-factor is 2. Equivalent mass = 74 / 2 = 37.
-
3. 20 mL of 0.1 N HCl neutralises how many mL of 0.04 N NaOH?
- 8 mL
- 20 mL
- 40 mL
- 50 mL
Show answer
Answer: D. N1V1 = N2V2 gives 0.1 x 20 = 0.04 x V, so V = 2 / 0.04 = 50 mL.
-
4. In a back titration, 30 mmol of HCl is added to a sample and 12 mmol is left over. How much HCl reacted with the sample?
- 42 mmol
- 18 mmol
- 12 mmol
- 30 mmol
Show answer
Answer: B. Used up = added - left over = 30 - 12 = 18 mmol.
-
5. 0.5 g of impure CaCO3 reacts with exactly 8 mmol of HCl (CaCO3 + 2HCl). What is the percentage purity? (CaCO3 = 100 g/mol.)
- 80 per cent
- 40 per cent
- 60 per cent
- 20 per cent
Show answer
Answer: A. CaCO3 = 8 / 2 = 4 mmol = 0.004 mol, which is 0.4 g. Purity = 0.4 / 0.5 x 100 = 80 per cent.
Sign in to keep track of the lessons you finish.