• Practice
  • About 14 min
  • 5 practice questions

Weak acids and bases: Ka, degree of ionisation and pH

Solve pH problems for weak acids and bases using Ka and Kb, and link degree of ionisation to concentration.

If something looks wrong, please tell us.

A strong acid gives its full concentration of H+ ions, so its pH is easy. A weak acid does not, and exam questions test whether you know the difference. This lesson gives the short method for weak acids and weak bases, the approximation that makes it quick, and the traps that cost marks. All Ka and Kb values below are illustrative numbers chosen for practice, not data to memorise.

The equilibrium and the constant

A weak acid HA ionises only partly: HA <=> H+ + A-. The acid dissociation constant is Ka = [H+][A-] / [HA]. A larger Ka means a stronger acid, and pKa = -log Ka, so a smaller pKa means a stronger acid. For a weak base B, Kb = [BH+][OH-] / [B] and pKb = -log Kb. For a conjugate acid-base pair, Ka x Kb = Kw = 1 x 10^-14 at 25 degrees C.

The square-root shortcut

Let the starting concentration of the weak acid be C and let x mol/L ionise. Then [H+] = [A-] = x and [HA] = C - x. When ionisation is small (the degree of ionisation is below about 5 per cent), C - x is nearly C, so Ka = x^2 / C. That gives:

Weak acid: [H+] = sqrt(Ka x C). Weak base: [OH-] = sqrt(Kb x C). Degree of ionisation = sqrt(Ka / C): it rises when the solution is diluted.

— Formulas to remember

The degree of ionisation (alpha) is the fraction of molecules that ionise: alpha = x / C. After dilution alpha becomes larger, because the ions find each other less often to re-form HA, but [H+] itself becomes smaller because there is less acid in each litre. This is called Ostwald's dilution law.

Worked examples

Example 1. Find the pH of 0.1 M acetic acid, taking Ka = 1.8 x 10^-5. Working: [H+] = sqrt(1.8 x 10^-5 x 0.1) = sqrt(1.8 x 10^-6) = 1.34 x 10^-3 M. pH = -log(1.34 x 10^-3) = 3 - 0.13 = 2.87. Degree of ionisation = 1.34 x 10^-3 / 0.1 = 0.0134, about 1.3 per cent, so the approximation is valid.

Example 2. A 0.01 M solution of a weak acid has Ka = 1 x 10^-6. Find the pH and the degree of ionisation. Working: [H+] = sqrt(10^-6 x 10^-2) = sqrt(10^-8) = 10^-4 M, so pH = 4. Degree of ionisation = 10^-4 / 10^-2 = 0.01, or 1 per cent.

Example 3. Find the pH of 0.1 M ammonia solution, taking Kb = 1.8 x 10^-5. Working: [OH-] = sqrt(1.8 x 10^-5 x 0.1) = 1.34 x 10^-3 M. pOH = 2.87, so pH = 14 - 2.87 = 11.13.

Example 4. Ka of acetic acid is 1.8 x 10^-5. Find Kb of the acetate ion. Working: Kb = Kw / Ka = 10^-14 / (1.8 x 10^-5) = 5.6 x 10^-10. The conjugate base of a weak acid is a weak base, which is why sodium acetate solution is slightly basic.

Example 5. The weak acid in Example 2 is diluted 100-fold to 0.0001 M. How does the degree of ionisation change? Working: new alpha = sqrt(10^-6 / 10^-4) = sqrt(10^-2) = 0.1, or 10 per cent, which is ten times larger. This is only approximate because alpha is now not very small, but the trend is right.

Common traps

  • Writing [H+] = C for a weak acid. That is correct only for a strong monoprotic acid.
  • Using the square-root shortcut for a strong acid, or when the degree of ionisation is not small.
  • Forgetting to convert pOH to pH for a base.
  • Thinking that a weak acid is always a dilute one. Strength is about ionisation, concentration is about how much is dissolved.

Key takeaways

  • For a weak acid [H+] = sqrt(Ka C); for a weak base [OH-] = sqrt(Kb C).
  • A smaller pKa means a stronger acid; Ka x Kb = 10^-14 for a conjugate pair.
  • On dilution the degree of ionisation rises but [H+] falls.

Check your understanding

  1. 1. Which acid is the strongest?

    1. Acid with Ka = 1 x 10^-3
    2. Acid with Ka = 1 x 10^-5
    3. Acid with Ka = 1 x 10^-8
    4. Acid with Ka = 1 x 10^-10
    Show answer

    Answer: A. A larger Ka means greater ionisation, so the acid with Ka = 10^-3 is strongest. Its pKa is 3, the lowest of the four.

  2. 2. A 0.04 M weak acid has Ka = 1 x 10^-6. What is [H+]?

    1. 4 x 10^-4 M
    2. 1 x 10^-4 M
    3. 2 x 10^-4 M
    4. 4 x 10^-8 M
    Show answer

    Answer: C. [H+] = sqrt(Ka x C) = sqrt(10^-6 x 4 x 10^-2) = sqrt(4 x 10^-8) = 2 x 10^-4 M.

  3. 3. The pH of 0.1 M of a weak acid with Ka = 1 x 10^-5 is:

    1. 5.0, since the pH equals the pKa value
    2. 1.0, since [H+] equals 0.1 M exactly
    3. 4.0, since the pH is the pKa minus one
    4. 3.0, since [H+] works out to 10^-3 M
    Show answer

    Answer: D. [H+] = sqrt(10^-6) = 10^-3 M. The pH is 3. Taking [H+] = 0.1 would give pH 1, which is only true for strong acids.

  4. 4. When a weak acid solution is diluted, which statement is correct?

    1. The degree of ionisation decreases and [H+] decreases
    2. The degree of ionisation increases and [H+] decreases
    3. The degree of ionisation increases and [H+] increases
    4. The degree of ionisation is unchanged and Ka increases
    Show answer

    Answer: B. alpha = sqrt(Ka / C) rises as C falls, but [H+] = sqrt(Ka C) falls. Ka depends only on temperature, so it does not change.

  5. 5. If Kb of ammonia is 1.8 x 10^-5, the Ka of the ammonium ion is nearest to:

    1. 5.6 x 10^-10
    2. 1.8 x 10^-9
    3. 5.6 x 10^-5
    4. 1.8 x 10^-19
    Show answer

    Answer: A. Ka x Kb = 10^-14, so Ka = 10^-14 / (1.8 x 10^-5) = 5.6 x 10^-10.

Privacy · Terms · Refunds · Delivery