- Practice
- About 14 min
- 5 practice questions
Speed methods and traps in pH problems
Use quick estimates for pH, handle dilution and mixing, and avoid the classic errors such as the pH of very dilute acid.
If something looks wrong, please tell us.
pH questions are short, and the time saved by a good method is large. This lesson collects the tricks that experienced students use: a quick way to take logarithms, how to handle mixing in one step and the traps that fool nearly everyone at least once. All the concentrations are chosen for practice.
Speed method 1: pH = a - log b
Write the hydrogen ion concentration as b x 10^-a. Then pH = a - log b. You need only three logs: log 2 = 0.30, log 3 = 0.48 and log 5 = 0.70. For [H+] = 4 x 10^-5, pH = 5 - log 4 = 5 - 0.60 = 4.40. For 5 x 10^-3, pH = 3 - 0.70 = 2.30.
Speed method 2: excess decides, in millimoles
To mix an acid and a base, convert both to millimoles (concentration in mol/L x volume in mL). The smaller amount cancels the same amount of the larger. The excess is divided by the total volume. If the excess is acid, find the pH directly; if it is base, find pOH first.
Speed method 3: mixing two acids
Add the millimoles of H+ from each and divide by the total volume. The stronger solution dominates: a pH 2 solution mixed with an equal volume of pH 4 solution gives a pH close to that of the pH 2 solution plus 0.30.
Trap 1: very dilute acid
An acid can never take the pH of a solution above 7. For 10^-8 M HCl, the water itself supplies about 10^-7 M of H+, so the total is a little above 10^-7 M, and the pH is about 6.98, not 8.
Trap 2: neutral does not always mean pH 7
A solution is neutral when [H+] = [OH-]. Kw changes with temperature, so at a temperature above 25 degrees C pure water has a pH below 7 and is still neutral. The value 7 holds at 25 degrees C.
Worked examples
Example 1. 40 mL of 0.1 M HCl is mixed with 60 mL of 0.1 M NaOH. Find the pH. Working: H+ = 0.1 x 40 = 4 mmol; OH- = 0.1 x 60 = 6 mmol. Excess OH- = 2 mmol in 100 mL, so [OH-] = 0.02 M = 2 x 10^-2. pOH = 2 - log 2 = 2 - 0.30 = 1.70, and pH = 14 - 1.70 = 12.30.
Example 2. 10 mL of a solution of pH 2 is mixed with 10 mL of a solution of pH 4. Find the pH. Working: H+ = 10^-2 x 10 = 0.1 mmol and 10^-4 x 10 = 0.001 mmol. Total = 0.101 mmol in 20 mL, so [H+] = 5.05 x 10^-3 M. pH = 3 - log 5.05, about 3 - 0.70 = 2.30.
Example 3. Find the pH of 0.02 M H2SO4, assuming complete ionisation. Working: [H+] = 2 x 0.02 = 0.04 M = 4 x 10^-2. pH = 2 - log 4 = 2 - 0.60 = 1.40.
Example 4. 1 mL of a solution of pH 3 is diluted to 1000 mL. Find the pH. Working: dilution is 1000 times, so [H+] falls from 10^-3 to 10^-6 M, giving pH 6. It cannot go beyond 7; if the dilution were a million-fold, the pH would approach 7 from below.
pH = a - log b for [H+] = b x 10^-a. Mix in millimoles, subtract the smaller from the larger, divide by the total volume. An acid cannot make the pH rise above 7.
Key takeaways
- Learn log 2 = 0.30, log 3 = 0.48, log 5 = 0.70 and use pH = a - log b.
- Mix by millimoles and divide the excess by the total volume.
- Check the answer is on the right side of 7 and remember that Kw depends on temperature.
Check your understanding
-
1. What is the pH when [H+] = 2 x 10^-4 M? (log 2 = 0.30)
- 3.70
- 4.30
- 3.40
- 4.70
Show answer
Answer: A. pH = 4 - log 2 = 4 - 0.30 = 3.70.
-
2. The pH of 10^-8 M HCl at 25 degrees C is closest to:
- 8.0
- 7.0 exactly
- 9.0
- 6.98
Show answer
Answer: D. Water contributes about 10^-7 M of H+, so the total is slightly above 10^-7 M and the pH is a little below 7, about 6.98. An acid solution can never be basic.
-
3. 50 mL of 0.1 M HCl is mixed with 25 mL of 0.1 M NaOH. The pH is closest to: (log 3 = 0.48)
- 1.00
- 1.48
- 1.70
- 2.48
Show answer
Answer: B. H+ = 5 mmol and OH- = 2.5 mmol, so 2.5 mmol H+ remains in 75 mL: [H+] = 0.0333 M = 3.33 x 10^-2. pH = 2 - log 3.33 = 1.48.
-
4. A solution of pH 3 is diluted 100 times with water. The new pH is about:
- 1
- 3
- 5
- 7
Show answer
Answer: C. A 100-fold dilution lowers [H+] from 10^-3 M to 10^-5 M, so the pH rises by 2 to 5. Water adds a negligible amount at this concentration.
-
5. Pure water at a temperature above 25 degrees C is:
- acidic, since its pH is below 7
- basic, since its pH is above 7
- neutral, with a pH below 7
- neutral, with a pH exactly 7
Show answer
Answer: C. Kw rises with temperature, so [H+] = [OH-] is above 10^-7 M and the pH is below 7. The water is still neutral because the two concentrations stay equal.
Sign in to keep track of the lessons you finish.