- Practice
- About 14 min
- 5 practice questions
Combustion and mole calculations for carbon compounds
Solve mass and volume questions on burning, fermentation, esterification and limiting reactants using a four-step method.
If something looks wrong, please tell us.
Numerical questions on carbon compounds are mole calculations in disguise. Whether the question concerns burning a fuel, fermenting glucose or making an ester, the working has the same four steps, and a candidate who follows them rarely goes wrong. Atomic masses used here: H = 1, C = 12, O = 16. At STP one mole of any gas has a volume of 22.4 litres.
The four steps
- Write the balanced equation.
- Convert the given quantity to moles (mass / molar mass, or volume / 22.4 litres for a gas at STP).
- Use the coefficients of the equation to find the moles of the quantity wanted.
- Convert back to mass or volume. For percentage yield: actual / theoretical x 100.
Worked examples
Example 1. Find the mass of CO2 and H2O produced by burning 30 g of ethane. Working: 2C2H6 + 7O2 gives 4CO2 + 6H2O. Molar mass of ethane = 30 g, so 30 g = 1 mol. Per mole of ethane, 2 mol CO2 and 3 mol H2O form. CO2 = 2 x 44 = 88 g. H2O = 3 x 18 = 54 g.
Example 2. What volume of oxygen at STP is needed to burn 11.2 litres of propane, and what volume of CO2 forms? Working: C3H8 + 5O2 gives 3CO2 + 4H2O. For gases, volumes follow the mole ratio. Oxygen = 5 x 11.2 = 56 litres. CO2 = 3 x 11.2 = 33.6 litres.
Example 3. Glucose ferments: C6H12O6 gives 2C2H5OH + 2CO2. Find the mass of ethanol and of CO2 from 90 g of glucose. Working: molar mass of glucose = 180 g, so 90 g = 0.5 mol. Ethanol = 2 x 0.5 = 1 mol = 46 g. CO2 = 1 mol = 44 g.
Example 4. 30 g of ethanoic acid is reacted with excess ethanol, and 33 g of ethyl ethanoate is obtained. Find the percentage yield. Working: CH3COOH + C2H5OH gives CH3COOC2H5 + H2O. Molar mass of ethanoic acid = 60 g, so 30 g = 0.5 mol. Theoretical ester = 0.5 mol x 88 g/mol = 44 g. Yield = 33 / 44 x 100 = 75 per cent.
Example 5. What mass of oxygen is needed to burn 4.6 g of ethanol? Working: C2H5OH + 3O2 gives 2CO2 + 3H2O. Molar mass of ethanol = 46 g, so 4.6 g = 0.1 mol. Oxygen = 3 x 0.1 = 0.3 mol = 0.3 x 32 = 9.6 g.
Example 6 (limiting reactant). 8 g of methane is burnt with 16 g of oxygen. Find the mass of CO2. Working: CH4 + 2O2 gives CO2 + 2H2O. Methane = 8 / 16 = 0.5 mol. Oxygen = 16 / 32 = 0.5 mol. Oxygen needed for 0.5 mol of methane is 1.0 mol, so oxygen is limiting. CO2 = 0.5 / 2 = 0.25 mol = 0.25 x 44 = 11 g.
Balance, convert to moles, use the ratio, convert back. For gases at STP use 22.4 litres per mole. The limiting reactant is the one that runs out first.
Common traps
- Using the unbalanced equation.
- Using the mass of the fuel as if it were moles.
- Using 22.4 litres for a liquid or for water.
- Forgetting to work out the limiting reactant when both amounts are given.
Key takeaways
- All these questions follow the same four steps.
- Mole ratios from the equation link different substances.
- Percentage yield = actual / theoretical x 100.
Check your understanding
-
1. How many moles of CO2 form on burning 2 mol of propane completely?
- 3
- 4
- 5
- 6
Show answer
Answer: D. C3H8 + 5O2 gives 3CO2 + 4H2O. Each mole of propane gives 3 mol of CO2, so 2 mol give 6 mol.
-
2. What volume of CO2 at STP is formed on burning 22.4 litres of ethene (C2H4) completely?
- 22.4 litres
- 44.8 litres
- 67.2 litres
- 11.2 litres
Show answer
Answer: B. C2H4 + 3O2 gives 2CO2 + 2H2O. One volume of ethene gives two volumes of CO2, so 44.8 litres.
-
3. The mass of water formed on burning 16 g of methane is:
- 72 g
- 18 g
- 36 g
- 54 g
Show answer
Answer: C. 16 g = 1 mol methane. CH4 + 2O2 gives CO2 + 2H2O, so 2 mol of water = 36 g.
-
4. The theoretical mass of ethyl ethanoate (88 g/mol) from 0.2 mol of ethanoic acid is:
- 17.6 g
- 8.8 g
- 12 g
- 44 g
Show answer
Answer: A. 0.2 mol x 88 g/mol = 17.6 g.
-
5. In a reaction, 2 mol of A reacts with 1 mol of B. If 3 mol of A and 1 mol of B are mixed, the limiting reactant is:
- A
- neither
- B
- both together
Show answer
Answer: C. B (1 mol) needs 2 mol of A and A is in excess, so B runs out first and limits the amount of product.
Sign in to keep track of the lessons you finish.