- Practice
- About 12 min
- 5 practice questions
Soaps, detergents, hard water and polymers: short-answer drills
Answer the standard short questions on saponification, micelles, scum, hard water and addition polymers, including a few calculations.
If something looks wrong, please tell us.
This lesson is a set of the short questions that appear again and again: explain how soap cleans, why scum forms, how hard water is softened and what a polymer is. Each has a model answer of two or three lines. After reading the answers, close the page and write them from memory.
Model answers
- What is saponification? Heating a fat or oil with sodium (or potassium) hydroxide gives soap and glycerol. One molecule of a triglyceride needs three hydroxide units and gives three soap molecules.
- What is soap chemically? The sodium or potassium salt of a long-chain carboxylic acid, for example sodium stearate, C17H35COONa. It has an ionic head (water-loving) and a long hydrocarbon tail (oil-loving).
- How does soap clean? The tails dissolve in the oil or grease on the cloth while the heads stay in the water. Many soap molecules form a ball called a micelle with the tails pointing in towards the dirt and the heads pointing out. The micelles are carried away when rinsed.
- What is scum? In hard water, calcium and magnesium ions react with soap to form an insoluble solid: 2C17H35COONa + CaCl2 gives (C17H35COO)2Ca + 2NaCl. Scum wastes soap and sticks to clothes.
- How do detergents differ? Detergents are usually sodium salts of sulphonic acids or sulphates of long-chain hydrocarbons. Their calcium and magnesium salts are soluble, so they lather in hard water and give no scum.
- Temporary and permanent hardness. Temporary hardness is due to calcium and magnesium hydrogencarbonates and is removed by boiling. Permanent hardness is due to chlorides and sulphates of calcium and magnesium and is removed by washing soda, Na2CO3, which precipitates calcium carbonate.
Addition polymers in brief
A polymer is made from many monomers. In addition polymerisation, the monomers contain C=C bonds and join without losing atoms. Ethene gives polythene; chloroethene gives PVC. A polymer has a very large molar mass, because it is n times that of the monomer.
Worked examples
Example 1. Find the molar mass of sodium stearate, C17H35COONa. (C = 12, H = 1, O = 16, Na = 23.) Working: the formula is C18H35O2Na. 18 x 12 = 216; 35 x 1 = 35; 2 x 16 = 32; Na = 23. Total = 216 + 35 + 32 + 23 = 306 g/mol.
Example 2. 6.12 g of sodium stearate is added to hard water containing excess Ca2+. Find the mass of calcium stearate formed. Working: moles of sodium stearate = 6.12 / 306 = 0.02 mol. Two soap ions make one Ca(C17H35COO)2, so 0.01 mol forms. Molar mass = 2 x 283 + 40 = 606 g/mol (the stearate ion C17H35COO has mass 283). Mass = 0.01 x 606 = 6.06 g.
Example 3. Calcium chloride in water is removed by washing soda. Write the equation. Working: CaCl2 + Na2CO3 gives CaCO3 + 2NaCl. The calcium carbonate is insoluble and can be filtered off.
Example 4. Find the molar mass of polythene made from 500 ethene units. Working: ethene, C2H4, has mass 28 g/mol, so the polymer has mass 500 x 28 = 14 000 g/mol.
Soap: salt of a fatty acid, made by saponification, scum in hard water. Detergent: soluble calcium salt, no scum. Washing soda removes permanent hardness.
Common traps
- Saying that boiling removes permanent hardness. It only removes temporary hardness.
- Saying micelle tails point out into the water.
- Writing the soap formula without the COONa group.
- Forgetting that polymerisation loses no atoms.
Key takeaways
- Soap is made by saponification and cleans by forming micelles around oil.
- Scum forms with calcium and magnesium ions; detergents avoid it.
- Washing soda removes permanent hardness; boiling removes temporary hardness.
Check your understanding
-
1. The cleaning action of soap depends on:
- scum formation in water
- micelles that trap oil
- dissolving dirt in alcohol
- the acidity of the soap
Show answer
Answer: B. Soap molecules form micelles with the oil-loving tails around the grease and the ionic heads in water.
-
2. Scum is formed when soap reacts with:
- sodium ions
- chloride ions
- calcium ions
- hydrogen ions
Show answer
Answer: C. Calcium (and magnesium) ions form insoluble salts with the soap anion; this is scum.
-
3. Permanent hardness of water is removed by:
- boiling the water
- filtering through paper
- adding soap
- adding washing soda
Show answer
Answer: D. Washing soda precipitates the calcium and magnesium ions as carbonates.
-
4. What are the products of saponification of a fat with sodium hydroxide?
- glycerol and soap
- ethanol and ester
- glucose and soap
- water and ethene
Show answer
Answer: A. A fat or oil heated with NaOH gives glycerol and the sodium salt of the fatty acid (soap).
-
5. A polymer chain is built from 200 units of ethene (28 g/mol). Its molar mass is:
- 56 g/mol
- 560 g/mol
- 5600 g/mol
- 5.6 g/mol
Show answer
Answer: C. 200 x 28 = 5600 g/mol.
Sign in to keep track of the lessons you finish.