• Practice
  • About 13 min
  • 5 practice questions

Dilution, mixing and flow problems with pollutant concentrations

Use C1V1 = C2V2, weighted averages and flow ratios to solve pollutant problems, and convert between percentages, mg/L and ppm without slips.

If something looks wrong, please tell us.

After you know the units, the next step is to use them. Exam problems ask how much to dilute a stock solution, what happens when a polluted stream meets a clean one, or what concentration you get when two samples are mixed. Three tools solve almost all of them, and each takes a line or two.

Tool 1: percent, mg/L and ppm

A concentration in water by mass can be written three ways. 1 ppm = 1 mg per litre (for dilute water solutions, since 1 litre of water weighs about 1 kg). A percentage means grams per 100 g, so 1% = 10,000 ppm. A thousand times smaller, 1 ppb is 1 microgram per litre.

Tool 2: dilution

When you add water to a solution, the amount of dissolved substance does not change, so concentration times volume is constant: C₁V₁ = C₂V₂. Here V₂ is the final volume, not the volume of water added.

Worked example 1. A stock solution contains 1% of a dye tracer. Convert it to ppm: 1% = 10,000 ppm. 5 mL of the stock is made up to 500 mL with water. C₂ = (10,000 × 5) / 500 = 100 ppm. Check the other way: the dilution factor is 500 / 5 = 100, and 10,000 / 100 = 100.

Tool 3: mixing and flows

When two streams or samples meet, add the amounts of pollutant and divide by the total volume (or flow). Concentration of the mixture = (C₁V₁ + C₂V₂) / (V₁ + V₂).

Worked example 2: mixing two samples. 200 L of water at 12 mg/L is mixed with 300 L at 2 mg/L. Pollutant in the first = 12 × 200 = 2,400 mg. In the second = 2 × 300 = 600 mg. Total = 3,000 mg in 500 L, so the mixture has 3,000 / 500 = 6 mg/L. The answer lies between 2 and 12, as it must.

Worked example 3: a river receiving an effluent (illustrative flows). A factory releases 100 L/s of waste containing 50 mg/L of a dissolved pollutant into a river flowing at 900 L/s that carries none upstream. Pollutant per second = 100 × 50 = 5,000 mg. Total flow below the outlet = 100 + 900 = 1,000 L/s. Concentration = 5,000 / 1,000 = 5 mg/L, which is one tenth of the effluent. If the river already carried 1 mg/L, the upstream part adds 900 × 1 = 900 mg/s, and the result is (5,000 + 900) / 1,000 = 5.9 mg/L.

Dilution: C₁V₁ = C₂V₂ with V₂ the final volume. Mixing: total amount divided by total volume. 1% = 10,000 ppm and 1 ppm = 1 mg/L.

— Rule to remember

Worked example 4: amount in a tank. How much of a substance is in a 4,000 L tank at 2.5 ppm? Amount = 2.5 mg/L × 4,000 L = 10,000 mg = 10 g. If the tank must be brought down to 1 ppm by adding clean water, the final volume is V₂ = (2.5 × 4,000) / 1 = 10,000 L, so 6,000 L of clean water has to be added.

Common traps

  • Using the added volume instead of the final volume in C₁V₁ = C₂V₂.
  • Forgetting that 1% is 10,000 ppm, not 1,000 or 100,000.
  • Averaging two concentrations without weighting by volume. A simple average is right only when the volumes are equal.
  • Mixing units, such as mg/L with g/m³ (these two are in fact the same number) or with microgram/L, which is a thousand times smaller.

Key takeaways

  • Convert everything to mg/L first.
  • The amount of pollutant is conserved when streams mix or are diluted.
  • Check that the answer of a mixing problem lies between the two starting concentrations.

Check your understanding

  1. 1. A 2% solution is expressed in ppm as

    1. 200 ppm
    2. 2,000 ppm
    3. 20,000 ppm
    4. 2,00,000 ppm
    Show answer

    Answer: C. 1% = 10,000 ppm, so 2% = 20,000 ppm.

  2. 2. 25 mL of a 400 mg/L solution is made up to 1 litre with water. The new concentration is

    1. 10 mg/L
    2. 16 mg/L
    3. 0.4 mg/L
    4. 100 mg/L
    Show answer

    Answer: A. C₂ = (400 × 25) / 1000 = 10 mg/L. The final volume is 1000 mL.

  3. 3. 100 L at 30 mg/L is mixed with 400 L at 5 mg/L. The mixture contains

    1. 17.5 mg/L
    2. 10 mg/L
    3. 7.5 mg/L
    4. 12.5 mg/L
    Show answer

    Answer: B. Amount = 3,000 + 2,000 = 5,000 mg in 500 L, which is 10 mg/L.

  4. 4. A stream of 800 L/s with none of a pollutant receives 200 L/s of effluent containing 40 mg/L. The concentration downstream is

    1. 40 mg/L
    2. 10 mg/L
    3. 4 mg/L
    4. 8 mg/L
    Show answer

    Answer: D. Pollutant = 200 × 40 = 8,000 mg/s in 1,000 L/s, which gives 8 mg/L.

  5. 5. A 5,000 L tank holds 3 ppm of a substance. How much of it is dissolved?

    1. 15 g
    2. 150 g
    3. 1.5 g
    4. 0.15 g
    Show answer

    Answer: A. 3 mg/L × 5,000 L = 15,000 mg = 15 g.

Privacy · Terms · Refunds · Delivery