• Practice
  • About 15 min
  • 5 practice questions

Water treatment calculations: chlorine demand, alum and lime for hardness

Calculate chlorine dose and bleaching powder, the alkalinity used by alum, and the lime or soda needed to remove hardness, with mass checks.

If something looks wrong, please tell us.

Water treatment questions in competitive exams are simple stoichiometry with a practical flavour. A dose is given in mg per litre, the tank is given in litres, and a balanced equation links the chemicals. The method never changes: find the moles, use the equation, and convert back. The only new skill is keeping track of the units.

Chlorine dose, demand and residual

Not all of the chlorine you add is available to kill germs, because some reacts with organic matter and with dissolved substances. This loss is the chlorine demand. What is left is the residual chlorine. So dose = demand + residual. Bleaching powder is not pure chlorine: it is sold with a stated percentage of available chlorine.

Worked example 1. A tank holds 8,000 L. The water has a chlorine demand of 2.5 mg/L and a residual of 0.5 mg/L must remain (illustrative values). Dose = 2.5 + 0.5 = 3.0 mg/L. Chlorine needed = 3.0 × 8,000 = 24,000 mg = 24 g. If bleaching powder contains 25% available chlorine, the amount of powder = 24 / 0.25 = 96 g.

Alum and alkalinity

Aluminium sulphate used as a coagulant reacts with the bicarbonate in water: Al₂(SO₄)₃ + 3Ca(HCO₃)₂ → 2Al(OH)₃ + 3CaSO₄ + 6CO₂. The aluminium hydroxide floc is what traps the particles. If a water has too little alkalinity, lime or soda ash must be added to make the reaction work.

Worked example 2. A works doses 34.2 kg of Al₂(SO₄)₃ (M = 342) into a large flow. Moles of alum = 34.2 / 342 = 0.1 kmol. The equation gives 3 mol of Ca(HCO₃)₂ per mole of alum, so bicarbonate used = 0.3 kmol = 0.3 × 162 = 48.6 kg. Floc formed: 0.2 kmol of Al(OH)₃ = 0.2 × 78 = 15.6 kg. Carbon dioxide released: 0.6 kmol = 26.4 kg. Mass check: reactants 34.2 + 48.6 = 82.8 kg, products 15.6 + 40.8 (CaSO₄: 0.3 × 136) + 26.4 = 82.8 kg.

Removing hardness

Temporary hardness is caused by calcium bicarbonate and is removed by lime (Clark's method): Ca(HCO₃)₂ + Ca(OH)₂ → 2CaCO₃ + 2H₂O. Permanent hardness, caused for example by calcium sulphate, is removed by washing soda: CaSO₄ + Na₂CO₃ → CaCO₃ + Na₂SO₄. In both cases the calcium leaves as insoluble calcium carbonate.

Dose = demand + residual. Alum uses 3 mol of bicarbonate per mol. Lime removes bicarbonate hardness 1:1; soda removes sulphate hardness 1:1.

— Rule to remember

Worked example 3: lime. 1,000 L of water contains 162 mg per litre of Ca(HCO₃)₂. Total bicarbonate = 162 × 1,000 = 162,000 mg = 162 g = 1 mol. The equation needs 1 mol of Ca(OH)₂ = 74 g. The lime is 74 g per 1,000 L, or 74 mg per litre.

Worked example 4: soda. The same 1,000 L contains 136 mg per litre of CaSO₄. Total = 136 g = 1 mol. It needs 1 mol of Na₂CO₃ = 106 g. Washing soda crystals (Na₂CO₃.10H₂O, M = 286) would need 286 g to supply the same carbonate.

Traps

  • Forgetting the factor of 3 in the alum equation.
  • Using the volume in litres where the answer is in grams without the mg to g conversion (divide by 1,000).
  • Forgetting that the powder is only partly available chlorine, so the weight to weigh out is larger than the chlorine needed.

Key takeaways

  • Chlorine dose is demand plus residual; divide by the available fraction for bleaching powder.
  • Alum consumes bicarbonate, releases CO₂ and forms the floc.
  • Lime and soda ash remove hardness by precipitating calcium carbonate.

Check your understanding

  1. 1. A water has chlorine demand 1.8 mg/L and the residual needed is 0.2 mg/L. What is the dose?

    1. 1.6 mg/L
    2. 2.0 mg/L
    3. 0.36 mg/L
    4. 9 mg/L
    Show answer

    Answer: B. Dose = demand + residual = 1.8 + 0.2 = 2.0 mg/L.

  2. 2. How much chlorine is needed to dose 5,000 L at 2 mg/L?

    1. 1 g
    2. 2.5 g
    3. 10 g
    4. 100 g
    Show answer

    Answer: C. 2 mg/L × 5,000 L = 10,000 mg = 10 g.

  3. 3. Bleaching powder with 20% available chlorine is used to supply 30 g of chlorine. How much powder is weighed out?

    1. 150 g
    2. 6 g
    3. 60 g
    4. 600 g
    Show answer

    Answer: A. Powder = 30 / 0.20 = 150 g.

  4. 4. Moles of Ca(HCO₃)₂ consumed by 2 mol of Al₂(SO₄)₃ are

    1. 2 mol
    2. 3 mol
    3. 4 mol
    4. 6 mol
    Show answer

    Answer: D. Each mole of alum uses 3 mol of calcium bicarbonate, so 2 mol uses 6 mol.

  5. 5. What mass of Ca(OH)₂ (M = 74) removes 162 g of Ca(HCO₃)₂ (M = 162)?

    1. 37 g
    2. 148 g
    3. 74 g
    4. 162 g
    Show answer

    Answer: C. Ca(HCO₃)₂ + Ca(OH)₂ gives a 1 : 1 ratio. 162 g is 1 mol, so 1 mol of lime = 74 g.

Privacy · Terms · Refunds · Delivery