- Practice
- About 16 min
- 5 practice questions
Water quality calculations: ppm, DO, BOD and COD
Convert between ppm, ppb and mg/L, calculate BOD from dissolved oxygen readings with dilution, and calculate COD from the dichromate used.
If something looks wrong, please tell us.
Water quality is judged with a few measured numbers, and exam problems ask you to calculate them from laboratory data. The chemistry is simple once you see that each number is a mass of oxygen (or of a pollutant) per litre of water. This lesson covers the unit conversions, the biochemical oxygen demand test and the chemical oxygen demand test, with the traps in each.
Units: ppm, ppb and mg/L
For dilute water, 1 litre ≈ 1 kg, so 1 mg/L ≈ 1 ppm and 1 µg/L ≈ 1 ppb (parts per billion). 1 ppm = 1000 ppb. Toxic metals are often quoted in ppb because the amounts are so small. Always reduce the data to 'per litre' first, then convert.
Dissolved oxygen and BOD
Dissolved oxygen (DO) is the oxygen dissolved in water, in mg/L. Cold water holds more than warm water. Biochemical oxygen demand (BOD) is the oxygen used by microbes to break down the organic matter in a litre of water. In the standard test, the sample is kept in a sealed bottle in the dark, usually for 5 days at 20 °C, and DO is measured at the start and at the end. BOD = initial DO − final DO.
Polluted water would use up all the oxygen in the bottle, so it is first diluted with oxygen-rich water. If P is the fraction of the bottle that is sample, BOD = (initial DO − final DO) ÷ P. For example, 10 mL of sample in a 300 mL bottle gives P = 10/300 = 1/30, so the drop in DO is multiplied by 30.
Chemical oxygen demand (COD)
COD measures the oxygen equivalent of all the matter that a strong oxidant, acidified potassium dichromate, can oxidise. Dichromate gains six electrons: Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O. Oxygen gains four: O₂ + 4H⁺ + 4e⁻ → 2H₂O. So one mole of dichromate does the work of 6/4 = 1.5 mol of O₂, that is 48 g of oxygen. COD = moles of dichromate used × 1.5 × 32 g, expressed per litre of sample.
Trap: COD is normally greater than or equal to BOD, because dichromate oxidises organic matter that microbes cannot break down within 5 days. A question giving BOD greater than COD for the same sample is describing an impossible or wrong measurement.
Worked example 1: unit conversion
A 2 L sample contains 0.004 mg of mercury. Concentration = 0.004 ÷ 2 = 0.002 mg/L = 2 µg/L = 2 ppb, which is 0.002 ppm.
Worked example 2: BOD with dilution
15 mL of waste water is diluted to 300 mL in a BOD bottle. The DO is 8.6 mg/L at the start and 4.1 mg/L after 5 days. Drop in DO = 8.6 − 4.1 = 4.5 mg/L. P = 15 ÷ 300 = 0.05. BOD = 4.5 ÷ 0.05 = 90 mg/L. Without the dilution correction you would answer 4.5 mg/L, twenty times too small.
Worked example 3: COD
A 250 mL sample of effluent uses 2.5 × 10⁻⁴ mol of K₂Cr₂O₇ in a COD test. O₂ equivalent = 1.5 × 2.5 × 10⁻⁴ = 3.75 × 10⁻⁴ mol = 3.75 × 10⁻⁴ × 32 g = 0.012 g = 12 mg. This is in 250 mL, so per litre it is 12 × 4 = 48 mg/L. COD = 48 ppm.
Speed method
For COD, remember 1 mol dichromate = 48 g O₂, so 1 mmol dichromate = 48 mg O₂. In example 3, 0.25 mmol × 48 = 12 mg, then scale to a litre. For BOD, divide the DO drop by the sample fraction, or equivalently multiply by bottle volume ÷ sample volume.
BOD = (DO at start − DO after 5 days) ÷ fraction of sample. COD = mol dichromate × 48 g O₂, per litre. 1 mg/L ≈ 1 ppm; 1 µg/L ≈ 1 ppb.
- Reduce everything to per litre first.
- Dilution: multiply the DO drop by bottle volume ÷ sample volume.
- One dichromate = 1.5 O₂ = 48 g of oxygen.
- COD is normally at least as large as BOD.
Check your understanding
-
1. 3 mg/L of a substance in water is about
- 3 ppb
- 300 ppb
- 3000 ppb
- 0.003 ppb
Show answer
Answer: C. 3 mg/L ≈ 3 ppm and 1 ppm = 1000 ppb, so 3000 ppb.
-
2. In a COD test, one mole of dichromate is equivalent to how many moles of O₂?
- 1
- 1.5
- 3
- 6
Show answer
Answer: B. Dichromate takes 6 electrons, O₂ takes 4, so 6 ÷ 4 = 1.5 mol O₂.
-
3. An undiluted sample has DO 9.0 mg/L at the start and 4.5 mg/L after 5 days of incubation. Its BOD is
- 4.5 mg/L
- 13.5 mg/L
- 9.0 mg/L
- 2.0 mg/L
Show answer
Answer: A. BOD = 9.0 − 4.5 = 4.5 mg/L. With no dilution, the sample fraction is 1.
-
4. Why is COD usually greater than BOD for the same sample?
- Microbes use more oxygen than dichromate
- COD is measured in warm water
- BOD is measured over a longer time
- Dichromate also oxidises matter that microbes cannot break down in 5 days
Show answer
Answer: D. The chemical oxidant attacks nearly all oxidisable matter, including material not biodegraded in the BOD test.
-
5. 20 mL of sample is diluted to 300 mL. DO falls from 8.0 to 5.0 mg/L in 5 days. What is the BOD?
- 3 mg/L
- 45 mg/L
- 15 mg/L
- 60 mg/L
Show answer
Answer: B. Drop = 3.0 mg/L. P = 20/300 = 1/15. BOD = 3.0 × 15 = 45 mg/L.
Sign in to keep track of the lessons you finish.