Revision notes

Environmental Chemistry: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Emission equations and mass shortcuts

Speed ratios
ChangeRatio of massesMultiply the element mass by
C → CO₂12 : 4411/3 (about 3.67)
C → CO12 : 287/3 (about 2.33)
S → SO₂32 : 642
SO₂ → H₂SO₄64 : 9849/32 (about 1.53)
O₂ needed for C → CO₂12 : 328/3
O₂ needed for S → SO₂32 : 321

C → CO₂: ×11/3. C → CO: ×7/3. S → SO₂: ×2. Find the element's mass from the percentage first, then apply the ratio.

Key takeaways. Write the equations cleanly, remember NO is colourless and NO₂ brown, CO is the poison while CO₂ is the greenhouse gas, nitrogen oxides come from air, and use the mass ratios after converting percentages into masses.

Read the full lesson

Lesson 2

Acid rain by numbers

[H⁺] = 10⁻ᵖᴴ. A difference of d pH units means 10ᵈ times the H⁺. H₂SO₄ gives 2H⁺. One CaCO₃ removes 2H⁺.

Read the full lesson

Lesson 3

Smog and ozone: mechanisms and traps

Photochemical smog needs NOx + hydrocarbons + sunlight; NO₂ → NO + O is the light step. Stratospheric ozone loss: chlorine is a catalyst, held in reservoirs (ClONO₂, HCl) until polar clouds and spring sunlight free it.

Key takeaways. Ozone is protective high up and harmful at ground level. In smog, hydrocarbons are what let ozone accumulate. In the stratosphere, chlorine radicals destroy ozone catalytically; reservoir compounds and polar stratospheric clouds explain the spring ozone hole.

Read the full lesson

Lesson 4

Water quality calculations: ppm, DO, BOD and COD

BOD = (DO at start − DO after 5 days) ÷ fraction of sample. COD = mol dichromate × 48 g O₂, per litre. 1 mg/L ≈ 1 ppm; 1 µg/L ≈ 1 ppb.

Read the full lesson

Lesson 5

Greenhouse gases and green chemistry in numbers

CO₂ released by complete combustion
FuelFormula and molar massCO₂ per kg of fuel
Carbon (coke)C, 1244/12 ≈ 3.67 kg
Octane (petrol component)C₈H₁₈, 114352/114 ≈ 3.09 kg
Methane (natural gas)CH₄, 1644/16 = 2.75 kg
HydrogenH₂, 20 kg

CO₂ per kg = 44x ÷ M for CₓHᵧ. Atom economy = mass of wanted product ÷ total mass of reactants × 100%. Addition = 100%.

Read the full lesson

Lesson 6

Statement, assertion-reason and matching questions in environmental chemistry

Pollutants at a glance
PollutantMain sourceMain effectRemedy
Carbon monoxideIncomplete combustion, vehiclesBinds to haemoglobin and blocks oxygen transportComplete burning, catalytic converter
Sulphur dioxideBurning coal and oil containing sulphurAcid rain, breathing troubleLow-sulphur fuel, lime scrubber
Nitrogen oxidesHot engines and furnacesAcid rain, photochemical smogCatalytic converter
CFCsOld refrigerants and aerosol spraysDestroy stratospheric ozoneUse of substitutes
Nitrates, phosphatesFertilisers, detergents, sewageEutrophicationLimit use, treat sewage
MethaneMarshes, rice fields, cattle, landfillsGreenhouse gasCapture as biogas

Check A alone, then R alone, and only then ask whether R explains A. A true statement that is merely related to A is not an explanation of A.

— Rule to remember
Read the full lesson

Lesson 7

Dilution, mixing and flow problems with pollutant concentrations

Dilution: C₁V₁ = C₂V₂ with V₂ the final volume. Mixing: total amount divided by total volume. 1% = 10,000 ppm and 1 ppm = 1 mg/L.

— Rule to remember
  • Convert everything to mg/L first.
  • The amount of pollutant is conserved when streams mix or are diluted.
  • Check that the answer of a mixing problem lies between the two starting concentrations.
Read the full lesson

Lesson 8

Carbon dioxide arithmetic: fuels, limestone, glucose and the carbon-fraction method

CO₂ mass = carbon mass × 44/12. For a fuel: CO₂ per kg = (fraction of carbon) × 3.67.

— Rule to remember
  • Mass of CO₂ = mass of carbon × 44/12 for complete combustion.
  • 1 tonne of pure limestone gives 0.44 tonne of CO₂.
  • Respiration and photosynthesis are the forward and reverse of the same equation.
Read the full lesson

Lesson 9

Water treatment calculations: chlorine demand, alum and lime for hardness

Dose = demand + residual. Alum uses 3 mol of bicarbonate per mol. Lime removes bicarbonate hardness 1:1; soda removes sulphate hardness 1:1.

— Rule to remember
  • Chlorine dose is demand plus residual; divide by the available fraction for bleaching powder.
  • Alum consumes bicarbonate, releases CO₂ and forms the floc.
  • Lime and soda ash remove hardness by precipitating calcium carbonate.
Read the full lesson

Privacy · Terms · Refunds · Delivery