• Practice
  • About 16 min
  • 5 practice questions

Fertiliser calculations I: nutrient percentages and the oxide convention

Calculate the percentage of N, P or K in a fertiliser compound, convert between P2O5 and P and between K2O and K, and compare fertilisers by nutrient content.

If something looks wrong, please tell us.

Percentage-composition questions on fertilisers are among the quickest marks in chemistry, provided you handle the oxide convention correctly. Phosphorus and potassium are reported as P2O5 and K2O, not as the elements, and options are often built from the mix-up. Use H = 1, C = 12, N = 14, O = 16, P = 31, S = 32, Cl = 35.5, K = 39 and Ca = 40.

The basic method

Percentage of an element = (mass of that element in one formula unit ÷ molar mass) × 100. The only skill is adding molar masses accurately. Keep a few ready: NH4 = 18, NO3 = 62, SO4 = 96, PO4 = 95, H2PO4 = 97 and HPO4 = 96. Speed method: if two fertilisers have the same molar mass, the one with more nitrogen atoms has more nitrogen; for example, ammonium sulphate and DAP both have molar mass 132 and two nitrogen atoms, so both have 21.2% nitrogen.

CompoundMolar mass% N
Urea, CO(NH2)26046.7
Ammonium nitrate, NH4NO38035.0
Ammonium chloride, NH4Cl53.526.2
Ammonium sulphate, (NH4)2SO413221.2
Potassium nitrate, KNO310113.9

The oxide convention

Fertiliser grades report phosphorus as P2O5 and potassium as K2O. To convert: P2O5 has molar mass 142 and contains 62 g of phosphorus, so P = P2O5 × 0.436. K2O has molar mass 94 and contains 78 g of potassium, so K = K2O × 0.83. Going the other way, P2O5 = P × 2.29 and K2O = K × 1.20. A fertiliser can therefore show a K2O figure larger than its actual potassium content; that is not an error, it is the convention.

Worked example 1: DAP in both ways

Find the nitrogen and the P2O5-equivalent percentages of pure diammonium phosphate, (NH4)2HPO4. Step 1: molar mass = 2 × 18 + 1 + 31 + 64 = 132. Step 2: nitrogen = 28 ÷ 132 = 21.2%. Step 3: one P per formula unit, and one P2O5 holds two P, so the P2O5 equivalent of one formula unit is 142 ÷ 2 = 71. Step 4: P2O5 equivalent = 71 ÷ 132 = 53.8%. Commercial DAP has somewhat lower figures because it is not perfectly pure, which is why grades are read from the bag, not computed, in field problems.

Worked example 2: muriate of potash as K2O

Find the K2O equivalent of pure KCl. Step 1: two KCl (149 g) contain the potassium of one K2O (94 g). Step 2: K2O equivalent = 94 ÷ 149 × 100 = 63.1%. Step 3: actual potassium = 39 ÷ 74.5 = 52.3%. Check: 63.1 × 0.83 = 52.4, which matches the direct figure within rounding.

Worked example 3: from grade to element

A fertiliser is labelled 0-46-0. What percentage of elemental phosphorus does it contain? Step 1: it has 46% P2O5. Step 2: P = 46 × 0.436 = 20.1%. The trap option is 46%, which treats P2O5 as if it were phosphorus.

% element = mass of element in formula ÷ molar mass × 100. P = P2O5 × 0.436; K = K2O × 0.83. Grades are always % N, % P2O5, % K2O.

Key takeaways

Practise molar masses until they are automatic, use group masses such as NH4 = 18 to save time, and keep the two conversion factors 0.436 and 0.83 in mind. Read every question for the word 'element' or 'oxide' before choosing. The next lesson uses these percentages to work out doses for real fields.

Check your understanding

  1. 1. The percentage of nitrogen in ammonium chloride, NH4Cl, is about:

    1. 35.0%
    2. 26.2%
    3. 21.2%
    4. 46.7%
    Show answer

    Answer: B. Molar mass = 14 + 4 + 35.5 = 53.5. Nitrogen = 14 ÷ 53.5 × 100 = 26.2%.

  2. 2. A fertiliser contains 46% P2O5. Its elemental phosphorus content is about:

    1. 20.1%
    2. 46%
    3. 105%
    4. 31%
    Show answer

    Answer: A. P = P2O5 × 62/142 = 46 × 0.436 = 20.1%.

  3. 3. The K2O equivalent of pure potassium chloride is about:

    1. 52.3%
    2. 47.7%
    3. 83.0%
    4. 63.1%
    Show answer

    Answer: D. Two KCl (149 g) correspond to one K2O (94 g): 94 ÷ 149 × 100 = 63.1%. 52.3% is the elemental potassium.

  4. 4. The percentage of nitrogen in potassium nitrate, KNO3, is about:

    1. 38.6%
    2. 27.7%
    3. 13.9%
    4. 46.7%
    Show answer

    Answer: C. Molar mass = 39 + 14 + 48 = 101. Nitrogen = 14 ÷ 101 × 100 = 13.9%. 38.6% is the potassium.

  5. 5. Which of these has the highest percentage of nitrogen?

    1. Ammonium nitrate
    2. Ammonium sulphate
    3. Potassium nitrate
    4. Urea
    Show answer

    Answer: D. Urea has 46.7% N, ammonium nitrate 35%, ammonium sulphate 21.2% and potassium nitrate 13.9%.

Privacy · Terms · Refunds · Delivery