- Practice
- About 16 min
- 5 practice questions
Pesticides: classification, action and dilution problems
Classify pesticides by target and chemical family, explain how the main families act and persist, and solve spray-dilution and dose problems.
If something looks wrong, please tell us.
Pesticide questions test three things: whether you can place a named compound in the right class, whether you know why some pesticides persist and biomagnify, and whether you can prepare a spray of the right strength. This lesson gives a classification table, the key facts about each family and a single formula that solves every dilution problem.
Classification by target and by chemistry
| Chemical family | Examples | Key features |
|---|---|---|
| Organochlorines | DDT (dichlorodiphenyltrichloroethane), BHC (hexachlorocyclohexane; its gamma isomer is lindane), aldrin, endosulfan | Very persistent, fat-soluble, biomagnify |
| Organophosphates | Malathion, parathion | Less persistent; act on the nervous system by inhibiting the enzyme acetylcholinesterase; acutely toxic |
| Carbamates | Carbaryl | Also inhibit acetylcholinesterase; fairly short-lived |
| Pyrethroids | Cypermethrin | Synthetic versions of natural pyrethrins from pyrethrum flowers |
- Herbicides: 2,4-D is selective, killing broad-leaved weeds but sparing cereal crops; glyphosate is non-selective and kills most green plants it touches.
- Fungicides: Bordeaux mixture (copper sulphate + lime), sulphur, mancozeb.
- Rodenticides: zinc phosphide.
- Fumigants: aluminium phosphide, used to protect stored grain.
Traps: lindane is an organochlorine, not an organophosphate; Bordeaux mixture is a fungicide, not a fertiliser, although it contains copper; 2,4-D is a weedicide, not an insecticide. Biomagnification is a property of persistent, fat-soluble compounds, so organochlorines are the standard examples.
The dilution formula
Pesticides are sold as concentrates, for example an emulsifiable concentrate (EC) or wettable powder (WP) with a stated percentage of active ingredient. The amount of active ingredient does not change on dilution, so C1 × V1 = C2 × V2, where C1 is the concentrate strength, V1 the volume of concentrate, C2 the spray strength and V2 the spray volume. For field doses given as kilograms of active ingredient (a.i.) per hectare: product needed = a.i. needed ÷ fraction of a.i. in the product.
Worked example 1: making a spray
Prepare 10 litres of a 0.05% spray from a 50% EC. Step 1: C1 = 50, C2 = 0.05, V2 = 10,000 mL. Step 2: V1 = C2 × V2 ÷ C1 = 0.05 × 10,000 ÷ 50 = 10 mL. So 10 mL of concentrate is made up to 10 litres with water. Speed method: the dilution factor is 50 ÷ 0.05 = 1,000, so the concentrate is one-thousandth of the spray volume.
Worked example 2: dose per hectare
A recommendation is 0.5 kg of active ingredient per hectare, and the product is a 25% WP. How much product is needed for 2 hectares? Step 1: a.i. needed = 0.5 × 2 = 1 kg. Step 2: product = 1 ÷ 0.25 = 4 kg. The trap option is 0.25 kg or 1 kg, from forgetting that the product is only a quarter active ingredient.
Worked example 3: biomagnification numbers
Suppose a persistent pesticide is present in lake water at 0.0002 ppm, and its concentration rises ten times at each of four transfers: water to plankton, plankton to small fish, small fish to large fish, and large fish to a fish-eating bird. Step 1: the total factor is 10 × 10 × 10 × 10 = 10⁴. Step 2: bird = 0.0002 × 10,000 = 2 ppm. The factor of ten is illustrative; the method of multiplying factors is what is tested.
C1 × V1 = C2 × V2 for every spray dilution. Product = active ingredient needed ÷ fraction active. Organochlorines persist and biomagnify; organophosphates and carbamates inhibit acetylcholinesterase.
Key takeaways
Remember also the safety rules, which appear as statement questions: use the labelled dose, wear protective clothing, never spray against the wind, store pesticides locked away from food and children, never reuse containers, and respect the waiting period between spraying and harvest.
Place each compound by target and by chemical family, and remember the standard traps: lindane, Bordeaux mixture and 2,4-D. Use C1V1 = C2V2 for sprays and divide by the active fraction for field doses. For biomagnification, multiply the factor at each step. Safe handling, biopesticides and integrated pest management remain the right practical answers whenever a question asks how to reduce harm.
Check your understanding
-
1. Which of these is an organophosphate insecticide?
- DDT
- Lindane
- Malathion
- Cypermethrin
Show answer
Answer: C. Malathion is an organophosphate. DDT and lindane are organochlorines; cypermethrin is a pyrethroid.
-
2. Lindane is the gamma isomer of:
- Hexachlorocyclohexane (BHC)
- DDT
- Malathion
- 2,4-D
Show answer
Answer: A. Lindane is gamma-hexachlorocyclohexane, an organochlorine insecticide also known by the older name BHC.
-
3. How much of a 50% EC is needed to prepare 10 litres of a 0.05% spray?
- 1 mL
- 100 mL
- 50 mL
- 10 mL
Show answer
Answer: D. V1 = 0.05 × 10,000 mL ÷ 50 = 10 mL.
-
4. A recommendation is 0.5 kg active ingredient per hectare. Using a 25% WP, how much product is needed for 2 hectares?
- 1 kg
- 4 kg
- 0.25 kg
- 2 kg
Show answer
Answer: B. Active ingredient = 0.5 × 2 = 1 kg. Product = 1 ÷ 0.25 = 4 kg.
-
5. Which herbicide is non-selective, killing most green plants it contacts?
- 2,4-D
- Bordeaux mixture
- Glyphosate
- Zinc phosphide
Show answer
Answer: C. Glyphosate is non-selective. 2,4-D is selective for broad-leaved weeds; Bordeaux mixture is a fungicide and zinc phosphide a rodenticide.
Sign in to keep track of the lessons you finish.