Revision notes

Fuels and Combustion: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Combustion: conditions, ignition temperature and types

TypeWhat happensExamples
Rapid combustionThe substance burns quickly, giving heat and lightLPG on a gas stove, a lit candle, kerosene in a stove
Spontaneous combustionThe substance bursts into flame on its own, with no apparent causeWhite phosphorus at room temperature, some forest fires on very hot days
ExplosionSudden reaction with heat, light and sound; a large volume of gas is releasedCrackers on ignition, by heat or pressure

Combustion needs fuel + oxygen + ignition temperature. Remove any one and the fire goes out. A flame appears only if the fuel vaporises while burning.

Combustion is reaction with oxygen that releases heat and usually light, and it need not involve carbon. Ignition temperature explains the paper cup, wet wood and the match. Learn the three types with one example each, remember that slow oxidation is not combustion, and link flames to vaporisation. In the next lesson these ideas are applied to flames and to putting fires out.

Read the full lesson

Lesson 2

The flame and controlling fire

ZoneBurningColour and temperature
Outermost zoneComplete combustion (plenty of air)Blue, non-luminous, hottest part
Middle zonePartial combustionYellow, luminous (glowing carbon particles), moderately hot
Innermost zone (near the wick)No combustion; unburnt wax vapourDark, least hot

Outermost zone = complete, blue, hottest. Middle zone = partial, yellow, luminous. Inner zone = unburnt vapour, dark, least hot. Water for wood and paper; carbon dioxide for electrical and oil fires.

Learn the flame table as three pairs: complete-hottest, partial-luminous, unburnt-dark. Link each test (soot, red-hot wire, vapour through a tube) to its zone. For fire control, ask which side of the fire triangle is removed, and remember the two places water is wrong: live electrical wiring and burning oil.

Read the full lesson

Lesson 3

Calorific value and the ideal fuel

Rough textbook values; actual figures vary with the sample and the method of measuring
FuelRough calorific value (kJ/kg)
Cow dung cake6,000 - 8,000
Wood17,000 - 22,000
Coal25,000 - 33,000
Biogas35,000 - 40,000
Petrol, kerosene, dieselabout 45,000
Methane, CNGabout 50,000
LPGabout 55,000
Hydrogenabout 1,50,000

Calorific value = heat released on complete combustion ÷ mass of fuel (kJ/kg). Fuel needed = heat required ÷ (efficiency × calorific value).

Keep the unit kJ/kg in mind, use heat = mass × specific heat × temperature rise when water is heated, and always divide by the efficiency before finding the mass of fuel. Compare costs by price per unit of energy, not price per kilogram. Remember the ranking of fuels and why hydrogen, though best by calorific value, is not yet an everyday fuel.

Read the full lesson

Lesson 4

Fossil fuels and gaseous fuels

Type of coalCarbon contentNotes
PeatLowestFirst stage; much moisture, low heat, smoky
LigniteLowBrown coal, soft
BituminousHigherCommon household and industrial coal
AnthraciteHighestHard, burns with little smoke, highest heat of the four
FractionMain uses
LPGFuel for homes and industry
PetrolMotor fuel, aviation fuel, solvent for dry cleaning
KeroseneFuel for stoves, lamps and jet aircraft
DieselFuel for heavy vehicles and electric generators
Lubricating oilLubrication of machines
Paraffin waxOintments, candles, petroleum jelly
BitumenPaints and road surfacing
GasMain components
LPGButane, with some propane, liquefied under pressure
CNGMainly methane, compressed
BiogasMainly methane, with carbon dioxide
Coal gasHydrogen and methane, some carbon monoxide
Water gasCarbon monoxide + hydrogen
Producer gasCarbon monoxide + nitrogen

Coal: peat < lignite < bituminous < anthracite in carbon content. Coal heated without air gives coke, coal tar and coal gas. Water gas = CO + H2; producer gas = CO + N2.

Coal forms by carbonisation and the four types rise in carbon from peat to anthracite. Destructive distillation of coal gives coke for steel, coal tar for dyes and drugs, and coal gas. Petroleum is refined by fractional distillation into LPG, petrol, kerosene, diesel, lubricating oil, paraffin wax and bitumen. LPG is mainly butane, CNG and biogas mainly methane, and producer gas carries useless nitrogen.

Read the full lesson

Lesson 5

Combustion products, pollution and simple calculations

Complete: fuel + enough O2 → CO2 + H2O. Incomplete: CO and soot. Balance C, then H, then O. 1 g of S gives 2 g of SO2; 12 g of C gives 44 g of CO2.

Recognise complete and incomplete combustion from equations and from the flame colour. Know each pollutant with its harm: carbon monoxide poisons the blood, soot harms the lungs, sulphur and nitrogen oxides cause acid rain, and carbon dioxide adds to global warming. Use mole ratios from the balanced equation for every mass question.

Read the full lesson

Lesson 6

Petroleum fractions and cracking: exam practice

From top to bottom of the fractionating column
FractionMolecule sizeBoiling pointViscosityEase of ignition
Petroleum gas (LPG)SmallestLowestLowestEasiest
PetrolSmallLowLowEasy
KeroseneMediumMediumMediumModerate
DieselLargerHigherHigherHarder
Lubricating oil, waxLargeHighHighHard
BitumenLargestHighestHighest (semi-solid)Hardest

Fractional distillation is a physical separation by boiling point. Cracking is a chemical change: large alkane → smaller alkane + alkene.

— Rule to remember
  • Small molecules: low boiling point, low viscosity, easy to ignite, top of the column.
  • Cracking is chemical and gives an alkane and an alkene.
  • Check equations by counting C and H on both sides.
Read the full lesson

Lesson 7

Alternative fuels and biogas: exam questions and calculations

Yield: actual = theoretical × % / 100. Energy equivalence: m2 = m1 × CV1 / CV2. Gas to heat: volume → moles (÷ molar volume) → × kJ per mole.

— Rule to remember
Renewable or not?
FuelSourceRenewable?
BiogasDung and wasteYes
EthanolSugarcane and other cropsYes, if crops are regrown
PetrolCrude petroleumNo
HydrogenMade from water or other fuelsDepends on how it is made
  • Learn what each fuel is made from and what it burns to.
  • Use the equation for yield, calorific values for equivalence, and moles for volumes.
  • Always show units (kJ, kg, L).
Read the full lesson

Lesson 8

Heat calculations: Q = mcΔT, stove efficiency and fuel needed

Q = m c ΔT; heat supplied = mass of fuel × CV; efficiency = Q / heat supplied.

— Rule to remember
  • Heat needed → divide by efficiency → divide by calorific value.
  • Efficiency is useful heat divided by heat supplied.
  • Compare fuels by the cost of the whole job, not the price per kg.
Read the full lesson

Lesson 9

Gas volumes and combustion: air needed, contraction and finding a hydrocarbon

Same T and P: volume ratio = mole ratio. Oxygen needed per volume of CxHy = x + y/4. Contraction (water liquid) = 1 + y/4 per volume of hydrocarbon.

— Rule to remember
  • Gas volumes follow the coefficients; air is 21% oxygen.
  • Carbon dioxide is found by absorbing it with potassium hydroxide.
  • Oxygen per volume = x + y/4 for CxHy.
Read the full lesson

Privacy · Terms · Refunds · Delivery