- Practice
- About 13 min
- 5 practice questions
Petroleum fractions and cracking: exam practice
Order fractions by boiling point, viscosity and ease of burning, balance and check cracking equations, and avoid the usual confusions between physical and chemical processes.
If something looks wrong, please tell us.
Petroleum questions come in three flavours: ordering the fractions, matching a fraction to its use, and balancing a cracking equation. All three can be done in under a minute each if the basic pattern is clear. The pattern is simple: bigger molecule, higher boiling point, thicker liquid, darker colour, harder to light.
The pattern to memorise
| Fraction | Molecule size | Boiling point | Viscosity | Ease of ignition |
|---|---|---|---|---|
| Petroleum gas (LPG) | Smallest | Lowest | Lowest | Easiest |
| Petrol | Small | Low | Low | Easy |
| Kerosene | Medium | Medium | Medium | Moderate |
| Diesel | Larger | Higher | Higher | Harder |
| Lubricating oil, wax | Large | High | High | Hard |
| Bitumen | Largest | Highest | Highest (semi-solid) | Hardest |
Fractional distillation is a physical separation by boiling point. Cracking is a chemical change: large alkane → smaller alkane + alkene.
Why the pattern holds. The attraction between hydrocarbon molecules grows with their size. A small molecule such as propane needs little energy to escape from the liquid, so it boils at a low temperature and flows freely. A long chain of twenty or more carbon atoms has many more points of attraction, so it needs far more heat to boil and its molecules slide past each other slowly, which is why heavy oil is thick.
Common traps
- Calling fractional distillation a chemical change. No new substance forms; the hydrocarbons are only separated.
- Reversing the order: the lightest fraction comes out at the top, not the bottom.
- Forgetting the second product of cracking. The alkene is always there, and it is what decolourises bromine water.
- Writing an equation with unequal numbers of H atoms.
Worked example 1: find the missing product. C15H32 → C8H18 + X. Carbon: 15 - 8 = 7. Hydrogen: 32 - 18 = 14. So X is C7H14, an alkene (heptene). Check: it fits the alkene formula CnH2n, with n = 7 and 2n = 14.
Worked example 2: mass balance. 226 g of hexadecane, C16H34 (M = 226), is cracked to C8H18 (M = 114) and C8H16. M(C8H16) = 8 × 12 + 16 = 112. 226 g is 1 mol, which gives 1 mol of each product: 114 g + 112 g = 226 g, so mass is conserved. If only half a mole of C16H34 is cracked, 113 g gives 57 g of C8H18 and 56 g of C8H16.
Worked example 3: volume of ethene. C10H22 → C8H18 + C2H4. Cracking 71 g of C10H22 (M = 142) is 0.5 mol, which gives 0.5 mol of ethene = 14 g. At 0 °C and 1 atm, 1 mol of gas occupies 22.4 L, so the volume is 0.5 × 22.4 = 11.2 L.
Worked example 4: order and match. Arrange kerosene, bitumen, petrol and diesel in order of increasing viscosity: petrol < kerosene < diesel < bitumen, which follows the molecule size. Match: LPG - domestic cooking; kerosene - jet aircraft; bitumen - roads; lubricating oil - machines; paraffin wax - candles.
Worked example 5: statement check. (i) Cracking needs heat and a catalyst - true. (ii) Cracking gives only alkanes - false, it also gives alkenes. (iii) Diesel has smaller molecules than petrol - false, diesel molecules are larger. (iv) Crude oil is separated into fractions according to boiling point - true. So (i) and (iv) are correct.
Key takeaways
- Small molecules: low boiling point, low viscosity, easy to ignite, top of the column.
- Cracking is chemical and gives an alkane and an alkene.
- Check equations by counting C and H on both sides.
Check your understanding
-
1. Which fraction has the highest boiling range?
- Bitumen
- Petrol
- Kerosene
- Diesel
Show answer
Answer: A. Bitumen has the largest molecules and is the residue left at the bottom, so it has the highest boiling range.
-
2. Fractional distillation of petroleum is
- a chemical change
- a nuclear change
- a physical separation
- a combustion
Show answer
Answer: C. Fractions are separated by boiling point and no new substance forms, so it is a physical process.
-
3. In C12H26 → C8H18 + X, the molecular formula of X is
- C2H4
- C4H8
- C3H6
- C4H10
Show answer
Answer: B. The remainder is C4 and H8, so X is C4H8, an alkene.
-
4. What mass of ethene (M = 28) is formed when 1 mol of C10H22 cracks by C10H22 → C8H18 + C2H4?
- 14 g
- 56 g
- 42 g
- 28 g
Show answer
Answer: D. 1 mol of C10H22 gives 1 mol of ethene, which is 28 g.
-
5. Which statement about cracking is correct?
- It separates the fractions by boiling point
- It produces a more complex mixture of larger molecules
- It breaks large molecules into smaller ones
- It needs no heat or catalyst
Show answer
Answer: C. Cracking breaks large hydrocarbon molecules into smaller ones using heat and a catalyst.
Sign in to keep track of the lessons you finish.