- Practice
- About 16 min
- 5 practice questions
Calorific value and the ideal fuel
Calculate calorific value from experimental data, use it to compare fuels on energy and cost, and list the properties of an ideal fuel.
If something looks wrong, please tell us.
Different fuels give very different amounts of heat. A kilogram of cow dung cake and a kilogram of LPG are not equal sources of energy. To compare fuels fairly, chemists use a single number, the calorific value. Numerical questions on it are quick marks once the unit is clear, and this lesson trains the three common calculations: finding the calorific value, finding how much fuel is needed, and comparing cost per unit of energy.
Definition and unit
The calorific value of a fuel is the amount of heat energy produced by the complete combustion of 1 kg of that fuel. It is expressed in kilojoules per kilogram (kJ/kg). So calorific value = heat released ÷ mass of fuel burnt, with the mass in kilograms. Watch the unit in every option: kJ/kg is right; kJ alone or kg/kJ is wrong.
| Fuel | Rough calorific value (kJ/kg) |
|---|---|
| Cow dung cake | 6,000 - 8,000 |
| Wood | 17,000 - 22,000 |
| Coal | 25,000 - 33,000 |
| Biogas | 35,000 - 40,000 |
| Petrol, kerosene, diesel | about 45,000 |
| Methane, CNG | about 50,000 |
| LPG | about 55,000 |
| Hydrogen | about 1,50,000 |
The pattern matters more than the exact numbers: solid fuels are lowest, liquid fuels in the middle, gaseous fuels higher, and hydrogen is far above everything else. Hydrogen is still not a common household fuel because it is difficult and dangerous to store and transport.
Worked example 1: finding the calorific value
In an experiment, 4.5 kg of a fuel burnt completely and produced 1,80,000 kJ of heat. Find its calorific value. Step 1: calorific value = heat ÷ mass. Step 2: 1,80,000 ÷ 4.5 = 40,000. Answer: 40,000 kJ/kg. Speed check: 4.5 × 40,000 = 1,80,000, which confirms it.
Worked example 2: how much fuel is needed
How much LPG (take its calorific value as 55,000 kJ/kg) is needed to heat 10 kg of water from 20 °C to 70 °C on a stove that passes only 50% of the heat to the water? Take the specific heat of water as 4.2 kJ per kg per °C. Step 1: heat needed by the water = mass × specific heat × rise in temperature = 10 × 4.2 × 50 = 2,100 kJ. Step 2: only half of the heat released reaches the water, so the fuel must release 2,100 ÷ 0.5 = 4,200 kJ. Step 3: mass of LPG = 4,200 ÷ 55,000 = 0.0764 kg, about 76 g. The trap is forgetting the efficiency step, which gives 38 g, exactly half the right answer.
Worked example 3: cost per unit of energy
Suppose fuel A costs ₹60 per kg with calorific value 30,000 kJ/kg, and fuel B costs ₹90 per kg with calorific value 50,000 kJ/kg. Which is cheaper for the same heat? Step 1: cost of 1,000 kJ from A = 60 ÷ 30 = ₹2.00. Step 2: cost of 1,000 kJ from B = 90 ÷ 50 = ₹1.80. Fuel B is cheaper per unit of energy even though it costs more per kilogram. Dividing price by calorific value in thousands of kJ is the fastest route. These prices are made up for practice.
Characteristics of an ideal fuel
- Readily available and cheap.
- Burns easily in air at a moderate, controllable rate.
- Has a high calorific value.
- Leaves little or no undesirable residue (ash).
- Does not produce harmful gases or other pollutants.
- Is easy and safe to store and transport.
No real fuel meets every point, so questions usually ask which property is not expected of an ideal fuel. Distractors such as 'burns explosively fast', 'leaves a lot of ash' or 'has a low calorific value' are the wrong ones.
Calorific value = heat released on complete combustion ÷ mass of fuel (kJ/kg). Fuel needed = heat required ÷ (efficiency × calorific value).
Key takeaways
Keep the unit kJ/kg in mind, use heat = mass × specific heat × temperature rise when water is heated, and always divide by the efficiency before finding the mass of fuel. Compare costs by price per unit of energy, not price per kilogram. Remember the ranking of fuels and why hydrogen, though best by calorific value, is not yet an everyday fuel.
Check your understanding
-
1. The unit of calorific value is:
- kJ
- kg/kJ
- kJ/kg
- kJ per litre per °C
Show answer
Answer: C. Calorific value is heat released per kilogram of fuel burnt completely, so its unit is kilojoules per kilogram.
-
2. 3 kg of a fuel on complete combustion releases 1,35,000 kJ. Its calorific value is:
- 45,000 kJ/kg
- 4,05,000 kJ/kg
- 15,000 kJ/kg
- 40,500 kJ/kg
Show answer
Answer: A. Calorific value = 1,35,000 ÷ 3 = 45,000 kJ/kg. Multiplying instead of dividing gives the wrong answer 4,05,000 kJ/kg.
-
3. Among common fuels, which has the highest calorific value?
- LPG
- Coal
- Petrol
- Hydrogen
Show answer
Answer: D. Hydrogen's calorific value is roughly three times that of petrol, far above any other common fuel.
-
4. 2 kg of water is heated through 30 °C (specific heat 4.2 kJ per kg per °C). If a fuel of calorific value 42,000 kJ/kg is used and all its heat reaches the water, the mass of fuel needed is:
- 0.6 g
- 6 g
- 60 g
- 252 g
Show answer
Answer: B. Heat = 2 × 4.2 × 30 = 252 kJ. Fuel mass = 252 ÷ 42,000 = 0.006 kg = 6 g.
-
5. Which of these is NOT a property of an ideal fuel?
- High calorific value
- Burns at a very fast, uncontrollable rate
- Leaves little residue
- Cheap and readily available
Show answer
Answer: B. An ideal fuel burns at a moderate, controllable rate. Very fast, uncontrolled burning is dangerous.
Sign in to keep track of the lessons you finish.