• Practice
  • About 15 min
  • 5 practice questions

The flame and controlling fire

Identify the three zones of a candle flame and their properties, and choose the right method to control different kinds of fire.

If something looks wrong, please tell us.

Once you know the three conditions for combustion, two practical questions follow. What is going on inside a flame, and how do we put a fire out safely? Both appear regularly in competitive exams, often as statement questions where one small word, such as 'hottest' or 'luminous', decides the answer.

The three zones of a candle flame

A candle flame is not uniform. When a candle burns, the wax melts, rises up the wick and vaporises, and it is this vapour that burns. Air reaches the outside of the flame easily but cannot get to the centre, so burning is complete on the outside and incomplete inside. This gives three zones.

ZoneBurningColour and temperature
Outermost zoneComplete combustion (plenty of air)Blue, non-luminous, hottest part
Middle zonePartial combustionYellow, luminous (glowing carbon particles), moderately hot
Innermost zone (near the wick)No combustion; unburnt wax vapourDark, least hot

The middle zone is bright because tiny particles of unburnt carbon glow in the heat. That is why it is called the luminous zone. Goldsmiths melt gold and silver using the outermost zone, blowing air into the flame through a metal blowpipe, because that is the hottest part.

Worked example 1: testing the zones

Three simple tests are often described in questions. Step 1: a clean glass plate held in the luminous (middle) zone for some seconds gets a black ring of soot on it. The soot is unburnt carbon, which proves combustion there is incomplete. Step 2: a thin copper wire held just inside the outermost zone becomes red hot, showing that this zone is the hottest. Step 3: a narrow glass tube held with one end in the dark zone carries away a vapour that can be lit at the other end, showing that the dark zone contains unburnt wax vapour. Each test matches one row of the table.

Worked example 2: candles under glass chimneys

Three lit candles are covered with glass chimneys. In case A, the chimney rests on two wooden blocks so air can enter at the bottom. In case B, the blocks are removed, so air can enter only from the top. In case C, the top of the chimney is also covered by a glass plate. What happens? In A, fresh air keeps coming in, so the candle burns freely. In B, air supply is poor; the flame flickers and becomes smoky because burning is incomplete. In C, no fresh air can enter; once the oxygen inside is used up, the flame goes out. The experiment shows that air (oxygen) is needed for burning and that a poor supply gives incomplete, smoky combustion.

Controlling fire: remove one side of the triangle

  • Cut off the fuel: switch off the gas supply, move combustible material away.
  • Cut off the air: cover with sand, a thick blanket or a layer of carbon dioxide.
  • Bring the temperature below the ignition temperature: cool with water.

Water is the commonest extinguisher. It cools the burning material below its ignition temperature, and the steam formed also helps keep air away. It is right for fires in wood, paper and cloth. But water must not be used on electrical fires, because water conducts electricity and the person may get a shock, nor on oil or petrol fires, because oil is lighter than water, floats on top and keeps burning, spreading the fire.

For electrical equipment and inflammable liquids, carbon dioxide is the best extinguisher. It is heavier than air, so it settles over the fire like a blanket and cuts off oxygen. It is stored as a liquid under pressure and cools strongly as it expands, and it does not damage electrical appliances. Carbon dioxide can also be produced near a fire from chemicals such as sodium hydrogencarbonate, which release it on heating. If a person's clothes catch fire, wrap the person in a blanket to cut off the air.

Outermost zone = complete, blue, hottest. Middle zone = partial, yellow, luminous. Inner zone = unburnt vapour, dark, least hot. Water for wood and paper; carbon dioxide for electrical and oil fires.

Key takeaways

Learn the flame table as three pairs: complete-hottest, partial-luminous, unburnt-dark. Link each test (soot, red-hot wire, vapour through a tube) to its zone. For fire control, ask which side of the fire triangle is removed, and remember the two places water is wrong: live electrical wiring and burning oil.

Check your understanding

  1. 1. The hottest part of a candle flame is the:

    1. Innermost dark zone
    2. Middle luminous zone
    3. Wick
    4. Outermost non-luminous zone
    Show answer

    Answer: D. Air reaches the outermost zone freely, so combustion there is complete and it is the hottest part. Goldsmiths use it for melting metals.

  2. 2. The middle zone of a candle flame is yellow and luminous because:

    1. Unburnt carbon particles glow in the heat
    2. Combustion there is complete
    3. It contains only wax vapour
    4. It contains no carbon
    Show answer

    Answer: A. Burning in the middle zone is partial, leaving tiny carbon particles that glow and give the yellow light. A glass plate held there collects soot.

  3. 3. Which is the best way to put out a fire in an electrical appliance?

    1. Pour water on it
    2. Use a carbon dioxide extinguisher after switching off the supply
    3. Fan it with a cloth
    4. Pour kerosene around it
    Show answer

    Answer: B. Water conducts electricity and can cause a shock. Carbon dioxide blankets the fire, cutting off oxygen, and does not harm electrical equipment.

  4. 4. Water is not used to extinguish a petrol fire because:

    1. Water catches fire
    2. Water raises the ignition temperature of petrol
    3. Petrol is lighter than water, floats on it and keeps burning
    4. Water reacts with petrol to form an explosive
    Show answer

    Answer: C. Petrol floats on water, stays in contact with air and continues to burn, and the water can spread the burning layer.

  5. 5. A narrow tube held in the innermost zone of a candle flame carries away something that burns at the other end. That something is:

    1. Carbon dioxide
    2. Unburnt wax vapour
    3. Water vapour
    4. Nitrogen
    Show answer

    Answer: B. The innermost zone holds wax vapour that has not yet burnt because air does not reach it. Led out through a tube, it meets air and can be lit.

Sign in to keep track of the lessons you finish.

Next lesson → Calorific value and the ideal fuel

Privacy · Terms · Refunds · Delivery