- Foundation
- 15 practice questions
Final self-assessment: metals and non-metals
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions on your own first, then check your answers and read each explanation. The questions are a little harder than the lesson checks and cover all five lessons, about three per lesson.
Final self-assessment
-
1. Which two metals are soft enough to be cut with a knife?
- Iron and copper
- Sodium and potassium
- Silver and gold
- Mercury and lead
Show answer
Answer: B. Sodium and potassium are exceptions among metals: soft enough to cut with a knife and with low melting points.
-
2. Which two properties make copper suitable for electric wires?
- Ductility and good electrical conductivity
- Malleability and lustre
- Sonority and hardness
- Brittleness and conductivity
Show answer
Answer: A. A wire needs a metal that can be drawn out (ductile) and that conducts electricity well. Copper has both; metals are not brittle.
-
3. Which pair of metals are poor conductors of heat compared with other metals?
- Silver and copper
- Aluminium and copper
- Lead and mercury
- Gold and silver
Show answer
Answer: C. Lead and mercury are the exceptions that conduct heat comparatively poorly. Silver and copper are the best conductors.
-
4. Which equation for aluminium oxide and hydrochloric acid is balanced?
- Al₂O₃ + 3HCl → 2AlCl₃ + 3H₂O
- Al₂O₃ + 6HCl → 2AlCl₃ + 3H₂O
- Al₂O₃ + 6HCl → AlCl₃ + 3H₂O
- Al₂O₃ + 6HCl → 2AlCl₃ + 6H₂O
Show answer
Answer: B. Left: Al 2, O 3, H 6, Cl 6. Right: Al 2, Cl 6, H 6, O 3. The others leave chlorine, aluminium or oxygen unbalanced.
-
5. Element X burns in oxygen, and the oxide dissolves in water to turn blue litmus red. What is X likely to be?
- A metal such as magnesium
- A metal such as sodium
- A metal such as copper
- A non-metal such as sulphur
Show answer
Answer: D. An oxide that gives an acid with water is acidic, which is typical of a non-metal (S + O₂ → SO₂). Metal oxides are basic.
-
6. Which list contains only metals that do not react with dilute hydrochloric acid?
- Zinc, magnesium, iron
- Copper, silver, gold
- Copper, zinc, gold
- Silver, magnesium, gold
Show answer
Answer: B. Only metals above hydrogen displace it from dilute acids. Copper, silver and gold are below hydrogen; zinc, magnesium and iron are above.
-
7. From which salt solution can iron displace a metal?
- Zinc sulphate
- Magnesium sulphate
- Aluminium sulphate
- Copper sulphate
Show answer
Answer: D. Iron is above copper but below zinc, magnesium and aluminium, so it can displace only copper: Fe + CuSO₄ → FeSO₄ + Cu.
-
8. Metal P displaces Q from a solution of Q's salt, and Q displaces R from a solution of R's salt. Which is correct?
- P is the most reactive and R the least
- R is the most reactive and P the least
- Q is the most reactive
- R will displace P from P's salt
Show answer
Answer: A. A metal displaces only less reactive metals, so P > Q and Q > R. Therefore P > Q > R, and R cannot displace P.
-
9. What are the products when magnesium is added to iron(II) sulphate solution?
- No reaction occurs
- Iron sulphate and magnesium oxide
- Magnesium sulphate and iron
- Magnesium sulphate and hydrogen
Show answer
Answer: C. Magnesium is more reactive than iron, so it displaces it: Mg + FeSO₄ → MgSO₄ + Fe.
-
10. Why can mercury be obtained from cinnabar (HgS) by heating alone, while aluminium needs electrolysis?
- Mercury is high in the reactivity series, while aluminium is low
- Cinnabar is an oxide ore
- Mercury is low in the reactivity series, while aluminium is high
- Aluminium is found free in nature
Show answer
Answer: C. Low-reactivity mercury is freed by heat: 2HgS + 3O₂ → 2HgO + 2SO₂, then 2HgO → 2Hg + O₂. Highly reactive aluminium holds oxygen too strongly, so electrolysis is needed.
-
11. Which sequence gets zinc from zinc carbonate?
- Calcination to zinc oxide, then reduction with carbon
- Roasting in excess air, then electrolytic refining only
- Reduction with carbon, then calcination
- Electrolysis of zinc carbonate solution
Show answer
Answer: A. ZnCO₃ → ZnO + CO₂ (calcination), then ZnO + C → Zn + CO (reduction). Roasting is for sulphide ores.
-
12. In the electrolytic refining of copper, which arrangement is correct?
- Anode: pure copper; cathode: impure copper; electrolyte: acidified copper sulphate
- Anode: impure copper; cathode: pure copper; electrolyte: sodium chloride solution
- Anode: zinc; cathode: impure copper; electrolyte: water
- Anode: impure copper; cathode: thin strip of pure copper; electrolyte: acidified copper sulphate
Show answer
Answer: D. The impure metal is the anode, which dissolves; pure copper deposits on the pure copper cathode from acidified copper sulphate solution.
-
13. Why does an iron nail kept in boiled water covered with a layer of oil not rust?
- Water is missing
- Oxygen is missing: boiling removes dissolved air and the oil keeps fresh air out
- Boiled water contains extra oxygen
- Oil reacts with the iron to form rust-proof steel
Show answer
Answer: B. Rusting needs both oxygen and water. Water is present, but boiling drives out dissolved air and the oil blocks fresh air, so there is no oxygen.
-
14. Silver turns black and copper develops a green coating in air. What are these coatings?
- Silver sulphide and basic copper carbonate
- Silver oxide and copper sulphide
- Silver carbonate and copper oxide
- Silver chloride and copper nitrate
Show answer
Answer: A. Silver reacts with sulphur compounds in air to form black silver sulphide; copper forms a green coating of basic copper carbonate.
-
15. Stainless steel is iron alloyed with:
- Copper and zinc
- Lead and tin
- Nickel and chromium
- Copper and tin
Show answer
Answer: C. Stainless steel contains iron with nickel and chromium, which make it resist rusting. Copper and zinc make brass, lead and tin make solder, and copper and tin make bronze.
Which lesson to revisit: Questions 1-3: lesson 1, Physical properties of metals and non-metals; questions 4-6: lesson 2, Chemical properties: reactions with oxygen, water and acids; questions 7-9: lesson 3, The reactivity series and displacement reactions; questions 10-12: lesson 4, Extraction of metals and ionic compounds; questions 13-15: lesson 5, Corrosion, alloys and mixed practice.
Sign in to keep track of the lessons you finish.