- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Mole concept practice
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting, as you would in a timed paper, and write your working for each. Then check the answers and read every explanation, including those for questions you got right, because several of them show a faster route. The questions are slightly harder than the lesson checks and mix ideas.
Final self-assessment
-
1. How many electrons are present in 3.2 g of methane, CH₄?
- 6.022 × 10^23
- 1.2044 × 10^24
- 1.2044 × 10^23
- 2.0 × 10^23
Show answer
Answer: B. n = 3.2 ÷ 16 = 0.2 mol. Each CH₄ has 6 + 4 = 10 electrons, so 2 mol of electrons = 2 × 6.022 × 10^23 = 1.2044 × 10^24.
-
2. What is the total number of ions in 34.2 g of Al₂(SO₄)₃ (M = 342), assuming complete dissociation?
- 3.011 × 10^23
- 6.022 × 10^22
- 1.5055 × 10^23
- 6.022 × 10^23
Show answer
Answer: A. n = 34.2 ÷ 342 = 0.1 mol. Each formula unit gives 2 Al³⁺ + 3 SO₄²⁻ = 5 ions. 0.5 mol of ions = 3.011 × 10^23.
-
3. 10 g each of four substances is taken. Which sample contains the largest number of atoms?
- 10 g of He
- 10 g of NH₃
- 10 g of H₂O
- 10 g of CH₄
Show answer
Answer: D. Moles of atoms: He 10 ÷ 4 = 2.5; NH₃ (10 ÷ 17) × 4 = 2.35; H₂O (10 ÷ 18) × 3 = 1.67; CH₄ (10 ÷ 16) × 5 = 3.125. Methane has the most.
-
4. For C₃H₈ + 5O₂ → 3CO₂ + 4H₂O, what volume of CO₂ at STP forms from 4.4 g of propane?
- 2.24 L
- 6.72 L
- 8.96 L
- 11.2 L
Show answer
Answer: B. n(C₃H₈) = 4.4 ÷ 44 = 0.1 mol. CO₂ = 3 × 0.1 = 0.3 mol = 0.3 × 22.4 = 6.72 L.
-
5. For 2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O, what volume of oxygen is needed to burn 10 L of ethane, all gases at the same temperature and pressure?
- 70 L
- 20 L
- 35 L
- 17.5 L
Show answer
Answer: C. Volumes follow coefficients: O₂ = 10 × 7/2 = 35 L.
-
6. For Fe₂O₃ + 3CO → 2Fe + 3CO₂, what mass of iron can be obtained from 16 kg of Fe₂O₃ (Fe = 56)?
- 5.6 kg
- 22.4 kg
- 8 kg
- 11.2 kg
Show answer
Answer: D. M(Fe₂O₃) = 112 + 48 = 160. 16 kg = 0.1 kmol. Fe = 2 × 0.1 = 0.2 kmol = 0.2 × 56 = 11.2 kg.
-
7. 10 g of H₂ is mixed with 64 g of O₂ and the mixture is exploded (2H₂ + O₂ → 2H₂O). What mass of water forms?
- 90 g
- 74 g
- 72 g
- 36 g
Show answer
Answer: C. H₂ = 5 mol (5 ÷ 2 = 2.5); O₂ = 2 mol (2 ÷ 1 = 2). O₂ is limiting. Water = 2 × 2 = 4 mol = 72 g. H₂ used = 4 mol, so 1 mol (2 g) of H₂ is left over; 74 g wrongly counts all 10 + 64 g as water.
-
8. 56 g of N₂ and 9 g of H₂ react (N₂ + 3H₂ → 2NH₃). What mass of nitrogen is left unreacted?
- 14 g
- 28 g
- 7 g
- 42 g
Show answer
Answer: A. N₂ = 2 mol (2 ÷ 1 = 2); H₂ = 4.5 mol (4.5 ÷ 3 = 1.5). H₂ is limiting and uses 1.5 mol of N₂. Left = 0.5 mol = 14 g.
-
9. For 2SO₂ + O₂ → 2SO₃, 6.4 g of SO₂ reacts with excess oxygen with a 60% yield. What mass of SO₃ is obtained?
- 6.0 g
- 8.0 g
- 3.84 g
- 4.8 g
Show answer
Answer: D. n(SO₂) = 6.4 ÷ 64 = 0.1 mol, so theoretical SO₃ = 0.1 × 80 = 8.0 g. Actual = 0.60 × 8.0 = 4.8 g.
-
10. A compound contains 40.0% C, 6.67% H and 53.33% O, and its vapour density is 30. What is its molecular formula?
- CH₂O
- C₂H₄O₂
- C₃H₆O₃
- C₂H₄O
Show answer
Answer: B. Moles: C 3.33, H 6.67, O 3.33, ratio 1 : 2 : 1, so CH₂O (mass 30). Molar mass = 2 × 30 = 60. n = 2, giving C₂H₄O₂.
-
11. An oxide of chromium contains 68.4% chromium (Cr = 52). What is its formula?
- CrO
- CrO₂
- Cr₂O₃
- CrO₃
Show answer
Answer: C. Moles: Cr 68.4 ÷ 52 = 1.315; O 31.6 ÷ 16 = 1.975. Ratio 1 : 1.5; doubled, 2 : 3. So Cr₂O₃ (check: 104 ÷ 152 = 68.4%).
-
12. A hydrate MgSO₄·xH₂O (MgSO₄ = 120) loses 51.2% of its mass when all its water is driven off. What is x?
- 7
- 5
- 6
- 10
Show answer
Answer: A. Water fraction: 18x ÷ (120 + 18x) = 0.512. So 18x = 61.44 + 9.216x, 8.784x = 61.44, x = 7.0. Check: 126 ÷ 246 = 51.2%.
-
13. What volume of 0.25 M H₂SO₄ contains 4.9 g of the acid?
- 100 mL
- 200 mL
- 400 mL
- 20 mL
Show answer
Answer: B. n = 4.9 ÷ 98 = 0.05 mol. V = 0.05 ÷ 0.25 = 0.2 L = 200 mL.
-
14. 50 mL of 0.5 M H₂SO₄ is mixed with 150 mL of 0.1 M H₂SO₄ and the mixture is diluted to 500 mL. What is the final molarity?
- 0.2 M
- 0.16 M
- 0.08 M
- 0.6 M
Show answer
Answer: C. Millimoles = 0.5 × 50 + 0.1 × 150 = 25 + 15 = 40. Final volume 500 mL. Molarity = 40 ÷ 500 = 0.08 M. (0.2 M forgets the dilution.)
-
15. What is the molarity of pure water (density 1 g/mL)?
- 1 M
- 18 M
- 100 M
- 55.5 M
Show answer
Answer: D. 1 L of water has mass 1000 g = 1000 ÷ 18 = 55.5 mol, so its molarity is about 55.5 M.
Which lesson to revisit: questions 1-3 test lesson 1 (the mole map and traps with atoms, ions and electrons), questions 4-6 lesson 2 (stoichiometry from balanced equations), questions 7-9 lesson 3 (limiting reagent and percentage yield), questions 10-12 lesson 4 (formulas from percentage data, vapour density and hydrates) and questions 13-15 lesson 5 (molarity, dilution and mixing).
Sign in to keep track of the lessons you finish.