- Practice
- About 15 min
- 5 practice questions
Limiting reagent and percentage yield
Identify the limiting reagent in seconds, find the amount of product and of leftover reactant, and calculate percentage yield.
If something looks wrong, please tell us.
In the last lesson one reactant was always 'in excess', so only one amount mattered. Real questions usually give the amounts of two reactants. Then one of them runs out first and decides how much product can form. That reactant is the limiting reagent. Finding it correctly is the step on which the whole answer depends, so this lesson gives a quick test and drills it with numbers.
The divide-by-coefficient test
Convert every reactant to moles. Divide each by its coefficient in the balanced equation. The reactant with the smallest result is the limiting reagent. If the results are equal, the reactants are in the exact ratio and both are used up completely. All product amounts are then calculated from the limiting reagent only.
Moles ÷ coefficient: the smallest value is the limiting reagent. Calculate every product from it.
A frequent mistake is to pick the reactant with the smaller mass or the smaller number of moles. That is wrong whenever the coefficients differ. In N₂ + 3H₂ → 2NH₃, 2 mol of N₂ and 3 mol of H₂ give 2 ÷ 1 = 2 and 3 ÷ 3 = 1, so hydrogen is limiting even though there are more moles of it.
Worked example 1: product and leftover
4 g of hydrogen is mixed with 48 g of oxygen and sparked: 2H₂ + O₂ → 2H₂O. Moles: H₂ = 4 ÷ 2 = 2 mol; O₂ = 48 ÷ 32 = 1.5 mol. Divide by coefficients: H₂ 2 ÷ 2 = 1; O₂ 1.5 ÷ 1 = 1.5. Hydrogen is limiting. Water formed = 2 mol (same as H₂) = 36 g. Oxygen used = 1 mol, so 1.5 − 1 = 0.5 mol = 16 g of oxygen is left over. Check: 4 + 48 = 52 g at the start; 36 + 16 = 52 g at the end.
Worked example 2: ammonia
14 g of nitrogen and 4 g of hydrogen react: N₂ + 3H₂ → 2NH₃. Moles: N₂ = 14 ÷ 28 = 0.5; H₂ = 4 ÷ 2 = 2. Divide: N₂ 0.5 ÷ 1 = 0.5; H₂ 2 ÷ 3 = 0.67. Nitrogen is limiting. NH₃ = 2 × 0.5 = 1 mol = 17 g. Hydrogen used = 3 × 0.5 = 1.5 mol, so 0.5 mol (1 g) of hydrogen is left.
Percentage yield
The amount calculated from the limiting reagent is the theoretical yield: the most product the reaction could give. In practice less is obtained because of side reactions, incomplete reaction or losses during handling. The amount actually collected is the actual yield.
Percentage yield = (actual yield ÷ theoretical yield) × 100
Worked example 3: yield
In example 2 the theoretical yield of ammonia is 17 g. If only 13.6 g is collected, the percentage yield is 13.6 ÷ 17 × 100 = 80%. Working backwards is also common: if a process is known to give a 60% yield, the expected mass is 0.60 × 17 = 10.2 g.
Speed tips
- When the moles are already in the coefficient ratio, say so and skip the test.
- Leftover = moles at start − moles used; the used amount comes from the limiting reagent.
- Theoretical yield always uses the limiting reagent, never the excess one.
- Percentage yield cannot exceed 100% for a pure, dry product; a larger value in your working signals an arithmetic error.
Key takeaways. Divide moles by coefficients to find the limiting reagent, then calculate all products and the amount of excess reagent used from it. Percentage yield compares the actual mass collected with the theoretical mass from the limiting reagent.
Check your understanding
-
1. 2 mol of H₂ react with 2 mol of O₂ (2H₂ + O₂ → 2H₂O). How many moles of water form?
- 4 mol
- 2 mol
- 1 mol
- 3 mol
Show answer
Answer: B. H₂: 2 ÷ 2 = 1; O₂: 2 ÷ 1 = 2. H₂ is limiting. Water = moles of H₂ = 2 mol (1 mol of O₂ is left).
-
2. 3 mol of N₂ and 6 mol of H₂ are mixed for N₂ + 3H₂ → 2NH₃. Which is the limiting reagent?
- N₂
- NH₃
- Neither; they are in the exact ratio
- H₂
Show answer
Answer: D. N₂: 3 ÷ 1 = 3; H₂: 6 ÷ 3 = 2. The smaller value is H₂, so hydrogen is limiting.
-
3. 6 g of carbon is burnt in 32 g of oxygen (C + O₂ → CO₂). What mass of CO₂ forms?
- 22 g
- 44 g
- 11 g
- 38 g
Show answer
Answer: A. C: 6 ÷ 12 = 0.5 mol; O₂: 32 ÷ 32 = 1 mol. Carbon is limiting, giving 0.5 mol CO₂ = 0.5 × 44 = 22 g.
-
4. Heating 20 g of CaCO₃ (CaCO₃ → CaO + CO₂) gives 8.4 g of CaO. What is the percentage yield?
- 84%
- 70%
- 75%
- 80%
Show answer
Answer: C. n(CaCO₃) = 20 ÷ 100 = 0.2 mol, so theoretical CaO = 0.2 × 56 = 11.2 g. Yield = 8.4 ÷ 11.2 × 100 = 75%.
-
5. 2 g of H₂ and 32 g of O₂ react to form water. What is left over?
- 16 g of O₂
- 1 g of H₂
- 8 g of O₂
- No reactant is left
Show answer
Answer: A. H₂ = 1 mol, O₂ = 1 mol. H₂: 1 ÷ 2 = 0.5; O₂: 1 ÷ 1 = 1, so H₂ is limiting. O₂ used = 0.5 mol; left = 0.5 mol = 16 g.
Sign in to keep track of the lessons you finish.