• Practice
  • About 15 min
  • 5 practice questions

Formulas from data: percentages, vapour density and hydrates

Find empirical and molecular formulas from percentage data, use vapour density for molar mass, and handle water of crystallisation.

If something looks wrong, please tell us.

Formula-finding questions look long but follow a fixed pattern. The difficulty in exam versions comes from awkward mole ratios such as 1 : 1.33, from molar mass given indirectly as vapour density, and from hydrated salts. This lesson practises each of these with the exam shortcuts that keep the arithmetic short.

The routine, and how to clear fractions

Assume 100 g, divide each percentage by the atomic mass, then divide by the smallest result. If a ratio ends in about .5, multiply everything by 2; about .33 or .67, multiply by 3; about .25 or .75, multiply by 4. Do not round 1.33 to 1 or 1.5 to 2: that is the most common way to get the wrong formula. Small differences such as 1.98 or 2.03 come from rounded data and may be rounded to the nearest whole number.

Clearing fractions
Decimal part of the ratioMultiply all ratios by
0.52
0.33 or 0.673
0.25 or 0.754
0.2, 0.4, 0.6, 0.85

Vapour density

Vapour density (VD) is the density of a gas or vapour compared with hydrogen gas under the same conditions. Since hydrogen's molar mass is 2, the molar mass of the gas is twice its vapour density.

Molar mass = 2 × vapour density. Then n = molar mass ÷ empirical formula mass.

Worked example 1: hydrocarbon with vapour density

A hydrocarbon contains 85.7% carbon and 14.3% hydrogen, and its vapour density is 28. Moles: C = 85.7 ÷ 12 = 7.14; H = 14.3 ÷ 1 = 14.3. Ratio 1 : 2, so the empirical formula is CH₂ (mass 14). Molar mass = 2 × 28 = 56. n = 56 ÷ 14 = 4, so the molecular formula is C₄H₈.

Worked example 2: a 1 : 1.33 ratio

An oxide of iron contains 72.4% iron (Fe = 56). Oxygen = 100 − 72.4 = 27.6%. Moles: Fe = 72.4 ÷ 56 = 1.293; O = 27.6 ÷ 16 = 1.725. Divide by 1.293: Fe = 1, O = 1.334. The decimal .33 means multiply by 3: Fe = 3, O = 4. The formula is Fe₃O₄. Check: 3 × 56 = 168 in 168 + 64 = 232, which is 72.4%.

Water of crystallisation

Many salts crystallise with water molecules built into the crystal, written after a dot, such as CuSO₄·5H₂O. On heating, this water is driven off and the mass falls. Two question types appear: find the percentage of water in a known hydrate, or find x in a hydrate MX·xH₂O from the mass lost.

Worked example 3: percentage of water

Find the percentage of water in CuSO₄·5H₂O (Cu = 63.5). Molar mass = 63.5 + 32 + 64 + 5 × 18 = 159.5 + 90 = 249.5. Water = 90 ÷ 249.5 × 100 = 36.1%.

Worked example 4: finding x

2.50 g of a hydrate CuSO₄·xH₂O leaves 1.60 g of anhydrous CuSO₄ on heating. Water lost = 0.90 g = 0.90 ÷ 18 = 0.05 mol. CuSO₄ = 1.60 ÷ 159.5 = 0.0100 mol. Ratio water : salt = 0.05 : 0.01 = 5, so x = 5.

Key takeaways. Clear fractional ratios by multiplying, never by rounding 1.33 or 1.5. Molar mass = 2 × vapour density. For hydrates, the water lost on heating converts to moles and is compared with moles of the anhydrous salt to find x. Always check a formula by recalculating one percentage.

Check your understanding

  1. 1. The vapour density of a gas is 22. What is its molar mass?

    1. 11 g/mol
    2. 22 g/mol
    3. 44 g/mol
    4. 88 g/mol
    Show answer

    Answer: C. Molar mass = 2 × VD = 2 × 22 = 44 g/mol.

  2. 2. A compound contains 52.2% C, 13.0% H and 34.8% O by mass. What is its empirical formula?

    1. C₂H₆O
    2. CH₃O
    3. C₂H₄O
    4. C₃H₈O
    Show answer

    Answer: A. Moles: C 52.2 ÷ 12 = 4.35; H 13.0 ÷ 1 = 13.0; O 34.8 ÷ 16 = 2.175. Divide by 2.175: C 2, H 6, O 1. So C₂H₆O.

  3. 3. An oxide of nitrogen contains 25.9% nitrogen and 74.1% oxygen. What is its formula?

    1. NO₂
    2. N₂O₃
    3. N₂O₄
    4. N₂O₅
    Show answer

    Answer: D. Moles: N 25.9 ÷ 14 = 1.85; O 74.1 ÷ 16 = 4.63. Ratio 1 : 2.5; multiply by 2 to get 2 : 5. So N₂O₅ (check: 28 ÷ 108 = 25.9%).

  4. 4. What is the percentage of water in washing soda crystals, Na₂CO₃·10H₂O?

    1. 37.1%
    2. 62.9%
    3. 18.0%
    4. 50.0%
    Show answer

    Answer: B. M(Na₂CO₃) = 46 + 12 + 48 = 106; 10H₂O = 180; total 286. Water % = 180 ÷ 286 × 100 = 62.9%.

  5. 5. A hydrocarbon has empirical formula CH and vapour density 39. What is its molecular formula?

    1. C₂H₂
    2. C₄H₄
    3. C₆H₆
    4. C₈H₈
    Show answer

    Answer: C. Molar mass = 2 × 39 = 78. Empirical formula mass = 13. n = 78 ÷ 13 = 6, so C₆H₆.

Privacy · Terms · Refunds · Delivery