• Practice
  • About 15 min
  • 5 practice questions

The ozone layer, UV bands and Dobson units

Locate the ozone layer, explain the Chapman cycle that makes and breaks ozone, match each UV band to how much of it reaches the ground, and convert Dobson units into thickness.

If something looks wrong, please tell us.

Ozone is the same molecule, O₃, wherever it is found, yet it is protective high in the stratosphere and harmful at ground level. Exam questions test this contrast, the ultraviolet bands the layer blocks, and the unit used to measure it. This lesson sets out those basics in a form you can use quickly, and the later lessons build the chemistry of depletion on top of it.

Where the ozone is

About 90% of the atmosphere's ozone lies in the stratosphere, mostly between roughly 15 and 35 km above the ground; this region is called the ozone layer. The rest is in the troposphere, where ozone is a secondary pollutant formed in photochemical smog and harms lungs and crops. A common trap reverses the two: stratospheric ozone is 'good ozone' that shields life, while ground-level ozone is 'bad ozone'. Because ozone absorbs ultraviolet energy, it heats the stratosphere, which is why temperature rises with height in that layer instead of falling.

The Chapman cycle

Ozone is constantly made and destroyed by sunlight in four steps. (1) Ultraviolet light of very short wavelength splits an oxygen molecule: O₂ + UV → O + O. (2) Each oxygen atom joins an oxygen molecule: O + O₂ → O₃. (3) Ozone absorbs ultraviolet and splits: O₃ + UV → O₂ + O. (4) An oxygen atom meets an ozone molecule: O + O₃ → 2O₂. Steps 2 and 3 cycle back and forth, turning harmful UV into heat; steps 1 and 4 create and finally remove ozone. In a natural balance the amount of ozone stays roughly steady. Depletion means human chemicals add extra, much faster ways of carrying out step 4.

The three UV bands

Ultraviolet bands
BandWavelength (approx.)Reaches the ground?
UV-C100–280 nmNo; absorbed completely by oxygen and ozone
UV-B280–315 nmPartly; ozone absorbs most of it, so thinning ozone lets more through
UV-A315–400 nmMostly yes; ozone absorbs little of it

The band that matters for ozone depletion is UV-B. UV-C is so strongly absorbed that it is blocked even by a thinned layer, and UV-A passes through regardless of ozone. So when the layer thins, the increase at the surface is mainly in UV-B, the band linked to sunburn, skin cancer and cataracts.

Dobson units

The total ozone in a column of air above a point is measured in Dobson units (DU). One DU is the amount of ozone that would form a layer 0.01 mm thick if all the ozone in the column were brought down to standard temperature and pressure (0 °C and 1 atmosphere). A typical value is about 300 DU, which means that all the ozone above you would make a layer only about 3 mm thick. In the Antarctic, values below 220 DU are used to mark the 'ozone hole'.

Worked example 1: converting DU

A station measures 280 DU. Thickness at STP = 280 × 0.01 mm = 2.8 mm. If the ozone layer over a city were 3.4 mm thick when compressed to STP, its total ozone would be 3.4 ÷ 0.01 = 340 DU. The shortcut: DU ÷ 100 gives millimetres.

Worked example 2: percentage loss

Total ozone falls from 300 DU to 210 DU. Loss = 90 DU, and percentage loss = 90 ÷ 300 × 100 = 30%. Now the trap version: if ozone then recovers from 210 to 300 DU, the percentage rise is 90 ÷ 210 × 100 ≈ 42.9%, not 30%, because the base has changed.

Good ozone: stratosphere (about 15–35 km); bad ozone: ground level. Thinning lets in more UV-B. 1 DU = 0.01 mm of ozone at STP; DU ÷ 100 = mm; about 300 DU is typical; below 220 DU = ozone hole.

Key takeaways: remember the four Chapman steps and that the cycle turns UV into heat; link depletion to UV-B, not UV-A or UV-C; and convert Dobson units by dividing by 100 to get millimetres at STP.

Check your understanding

  1. 1. A column of ozone measures 250 DU. How thick would it be at standard temperature and pressure?

    1. 2.5 mm
    2. 25 mm
    3. 0.25 mm
    4. 250 mm
    Show answer

    Answer: A. 1 DU = 0.01 mm, so 250 × 0.01 = 2.5 mm.

  2. 2. Which ultraviolet band increases most at the ground when the ozone layer thins?

    1. UV-A
    2. UV-B
    3. UV-C
    4. Visible violet light
    Show answer

    Answer: B. UV-C is blocked completely even by a thinned layer, and UV-A is hardly absorbed by ozone at all. UV-B is the band ozone controls.

  3. 3. In which layer of the atmosphere is most ozone found?

    1. Troposphere
    2. Mesosphere
    3. Stratosphere
    4. Thermosphere
    Show answer

    Answer: C. About 90% of ozone is in the stratosphere, mostly between about 15 and 35 km.

  4. 4. Which step of the Chapman cycle forms ozone?

    1. Ultraviolet light splitting an ozone molecule
    2. An oxygen atom combining with an ozone molecule
    3. Ultraviolet light splitting nitrogen
    4. An oxygen atom combining with an oxygen molecule
    Show answer

    Answer: D. O + O₂ → O₃ makes ozone. O₃ + UV splits it, and O + O₃ → 2O₂ destroys it.

  5. 5. Total ozone falls from 320 DU to 240 DU. What is the percentage fall?

    1. 80%
    2. 25%
    3. 33.3%
    4. 20%
    Show answer

    Answer: B. Fall = 80 DU. 80 ÷ 320 × 100 = 25%.

Privacy · Terms · Refunds · Delivery