• Practice
  • About 15 min
  • 5 practice questions

Water pollution: dissolved oxygen, BOD and sewage treatment

Calculate BOD from a dilution test, interpret BOD and dissolved oxygen, follow the stages of sewage treatment, and work out percentage removal.

If something looks wrong, please tell us.

Most water pollution questions come back to one idea: organic waste uses up oxygen as microbes break it down, and aquatic life needs that oxygen. Biochemical oxygen demand (BOD) measures this, and it appears in both theory and numerical questions. This lesson explains BOD, shows how to calculate it from a lab test, and walks through sewage treatment, which exists largely to lower BOD.

Dissolved oxygen, BOD and COD

Dissolved oxygen (DO) is the oxygen present in water, usually given in milligrams per litre. Fish and other aquatic animals depend on it. Biochemical oxygen demand (BOD) is the amount of oxygen that microorganisms consume while decomposing the organic matter in a water sample, measured in a standard laboratory test (commonly over 5 days at 20 °C). The more biodegradable organic matter in the water, the higher the BOD, so a high BOD means more polluted water. Chemical oxygen demand (COD) measures the oxygen needed to oxidise the organic matter chemically with a strong oxidising agent; because it includes matter that microbes cannot break down quickly, COD is usually higher than BOD.

Calculating BOD from a dilution test

Polluted water uses oxygen so fast that it is diluted before testing. A small volume of sample is placed in a bottle and topped up with clean, oxygen-saturated water. DO is measured at the start and after the incubation. BOD = (initial DO − final DO) ÷ P, where P is the fraction of the bottle that is sample: P = sample volume ÷ bottle volume.

Worked example 1: BOD

6 mL of sewage is diluted to 300 mL. DO is 8.6 mg/L at the start and 4.6 mg/L after 5 days. P = 6 ÷ 300 = 0.02. Oxygen used = 8.6 − 4.6 = 4.0 mg/L. BOD = 4.0 ÷ 0.02 = 200 mg/L. The trap is to stop at 4.0 mg/L and forget the dilution; the undiluted sample would use fifty times as much oxygen.

Stages of sewage treatment

  • Primary treatment (physical): screening removes floating debris, grit settles out, and in sedimentation tanks solids settle as primary sludge.
  • Secondary treatment (biological): the liquid is aerated so that aerobic microbes grow as flocs and consume organic matter, lowering BOD sharply. The flocs settle as activated sludge; part is returned to the aeration tank and the rest goes to anaerobic sludge digesters, where bacteria produce biogas containing methane, hydrogen sulphide and carbon dioxide.
  • Tertiary treatment: further steps to remove nutrients such as nitrate and phosphate, and disinfection, for example by chlorine or ultraviolet light.

Worked example 2: percentage removal

Sewage enters a plant with a BOD of 250 mg/L and leaves with 25 mg/L. Removal = (250 − 25) ÷ 250 × 100 = 90 percent. If primary treatment alone removes 30 percent and secondary removes 90 percent of what remains, the final BOD is 250 × 0.70 × 0.10 = 17.5 mg/L. As with air pollution devices, multiply the fractions remaining.

What happens in a river

Downstream of a sewage outfall, microbes decompose the waste and DO falls; further down, as the waste is used up and oxygen dissolves from the air, DO recovers. This dip is called the oxygen sag. The presence of coliform bacteria such as Escherichia coli shows faecal contamination and the possible presence of disease-causing organisms.

BOD = (initial DO − final DO) ÷ P, with P = sample volume ÷ bottle volume. High BOD = high organic pollution. COD ≥ BOD. Primary = physical, secondary = biological, tertiary = nutrients and disinfection.

Key takeaways: organic waste lowers dissolved oxygen through microbial decomposition. Always divide by the dilution fraction when calculating BOD. Secondary treatment does most of the BOD removal. Percentage removal is (in − out) ÷ in; for stages in series, multiply the fractions remaining.

Check your understanding

  1. 1. 10 mL of waste water is diluted to 300 mL. The dissolved oxygen falls from 8.0 mg/L to 5.0 mg/L during the test. What is the BOD of the waste water?

    1. 3 mg/L
    2. 90 mg/L
    3. 30 mg/L
    4. 270 mg/L
    Show answer

    Answer: B. P = 10 ÷ 300 = 1/30. Oxygen used = 3.0 mg/L. BOD = 3.0 ÷ (1/30) = 90 mg/L.

  2. 2. A sample with a high BOD indicates:

    1. A large amount of biodegradable organic pollution
    2. Very clean water rich in oxygen
    3. Water with no microorganisms
    4. Water polluted only by heat
    Show answer

    Answer: A. BOD measures the oxygen microbes use to decompose organic matter; more organic matter means higher BOD.

  3. 3. Sewage enters a treatment plant with a BOD of 240 mg/L and leaves with 36 mg/L. What percentage of the BOD has been removed?

    1. 15 percent
    2. 36 percent
    3. 85 percent
    4. 70 percent
    Show answer

    Answer: C. Removal = (240 − 36) ÷ 240 × 100 = 204 ÷ 240 × 100 = 85 percent.

  4. 4. Secondary treatment of sewage is mainly:

    1. Physical screening of floating objects
    2. Biological, using microbes in aerated tanks
    3. Chlorination only
    4. Evaporation of the water
    Show answer

    Answer: B. In secondary treatment aerobic microbes form flocs and consume organic matter, lowering BOD.

  5. 5. Which organisms are commonly used as indicators of faecal contamination of water?

    1. Nitrobacter
    2. Cyanobacteria such as Nostoc
    3. Mycorrhizal fungi
    4. Coliform bacteria such as Escherichia coli
    Show answer

    Answer: D. Coliforms live in the intestines of warm-blooded animals; their presence shows sewage contamination.

Privacy · Terms · Refunds · Delivery