- Foundation
- About 13 min
- 5 practice questions
Cement, aluminium and chemical industries
Describe the raw materials and location logic of the cement, aluminium and chemical industries, and calculate how much raw material a given output needs.
If something looks wrong, please tell us.
Besides iron and steel, several other industries are called basic, because their products go into buildings, vehicles, farms and other factories. In this lesson you will study three: cement, aluminium and the chemical industry. For each one you will learn what goes in, how the raw materials decide where the plant is built, and how to work out quantities. The ratios used in the examples are illustrative and chosen for easy arithmetic.
Cement
Cement is the binding material of concrete and mortar, so it is used for buildings, roads, bridges and dams. The main raw material is limestone. Clay or shale, gypsum and coal (as fuel) are also needed. Limestone and clay are crushed, mixed and heated in a kiln to a very high temperature, making hard lumps called clinker. The clinker is ground into a fine powder with a small amount of gypsum, which controls how fast the cement sets.
Limestone is heavy and loses a lot of weight when heated, since carbon dioxide escapes. So cement plants are placed near limestone deposits, and the finished cement is carried to markets by rail and road.
Aluminium
Aluminium is a light, strong metal that does not rust easily and conducts electricity well, so it is used for aircraft, utensils, wires and packaging. Its ore is bauxite. The ore is first refined into a white powder called alumina, and the alumina is then split by passing a very large electric current through it to give aluminium. This second stage uses a huge amount of electricity, so the cost of power is the most important factor. Smelters are therefore located where cheap power is available, often near hydro-electric or coal-based power stations, with bauxite brought by rail or road if it is not at hand.
Chemical industries
The chemical industry makes thousands of products. Heavy chemicals such as sulphuric acid, soda ash and caustic soda are made in large quantities and are used by other industries. Fertilisers, plastics, synthetic fibres, paints, medicines and soaps are other branches. Raw materials include salt, minerals, coal and petroleum products, so many chemical plants stand near sources of these materials, near ports (for imported inputs), or near large markets of farmers and factories.
| Industry | Main raw materials | Main location pull |
|---|---|---|
| Cement | Limestone, clay, gypsum, coal | Limestone deposits |
| Aluminium | Bauxite and electricity | Cheap power (and bauxite) |
| Chemicals | Salt, minerals, coal, petroleum products | Raw materials, ports, markets |
Worked example 1: cement quantities
Suppose 1.5 tonnes of limestone are needed for every tonne of cement, and gypsum makes up 5 per cent of the finished cement (these ratios are illustrative). A plant makes 600 tonnes of cement a day. Limestone needed = 1.5 x 600 = 900 tonnes. Gypsum = 5 per cent of 600 = 0.05 x 600 = 30 tonnes. The limestone is 900 / 600 = 1.5 times heavier than the output, which shows why the plant sits near the quarry.
Worked example 2: aluminium and bauxite
Suppose about 4 tonnes of bauxite are needed to make 1 tonne of aluminium (an illustrative figure). To make 250 tonnes of aluminium, bauxite needed = 4 x 250 = 1000 tonnes. The ore weighs four times as much as the metal. But the larger cost in this industry is electricity, and so a plant may be built near a power station and the bauxite brought to it, if power is cheaper than extra freight.
Cement goes where limestone is. Aluminium goes where cheap power is. Chemical plants go where raw materials, ports or markets are.
Key takeaways
- Cement is heavy-raw-material based: limestone, clay, gypsum and coal.
- Aluminium is power-intensive: bauxite plus much electricity.
- Chemicals are varied: heavy chemicals, fertilisers, plastics, medicines and more.
Check your understanding
-
1. The main raw material of cement is:
- Limestone
- Bauxite ore
- Common salt
- Raw cotton
Show answer
Answer: A. Cement is made mainly from limestone, with clay, gypsum and coal.
-
2. The ore of aluminium is:
- haematite
- limestone
- bauxite
- gypsum
Show answer
Answer: C. Bauxite is refined into alumina and then smelted into aluminium.
-
3. Aluminium smelters need to be near cheap power because:
- the metal is sold only to power stations
- bauxite is found only in power stations
- the ore cannot be moved by rail
- the process uses a huge amount of electricity
Show answer
Answer: D. Smelting alumina needs a very large electric current, so power is the chief cost.
-
4. If 1.5 tonnes of limestone make 1 tonne of cement, 400 tonnes of cement need:
- 400 tonnes of limestone
- 600 tonnes of limestone
- 1.5 tonnes of limestone
- 266 tonnes of limestone
Show answer
Answer: B. 1.5 x 400 = 600 tonnes.
-
5. Which of these is a heavy chemical?
- Sulphuric acid
- Cotton cloth
- Bread
- Glass bangles
Show answer
Answer: A. Sulphuric acid is a heavy chemical made in bulk and used by other industries.
Sign in to keep track of the lessons you finish.