• Foundation
  • About 12 min
  • 5 practice questions

Power for industry: conventional and non-conventional sources

Name the sources of power used by industry, say how each affects location, and calculate energy used and its cost.

If something looks wrong, please tell us.

Machines need energy. A steel furnace needs coal, a textile mill needs electricity, and a smelter needs electricity in huge quantities. Where power is cheap and steady, industry can grow; where it is short, factories struggle. This lesson sorts the sources of power, explains how each links to industrial location and teaches the simple arithmetic of energy and cost.

Conventional and non-conventional sources

Sources of power
SourceKindHow it is usedLocation note
CoalConventional, fossil fuelHeat for furnaces and thermal power stationsNear coalfields, or reached by rail or ports
Petroleum and natural gasConventional, fossil fuelFuel, chemicals, power stationsNear refineries and pipelines
Hydro-electricityConventional, flowing waterTurbines at damsNeeds a river with a good flow and fall
NuclearNon-conventional (not renewable)Heat from splitting atoms in nuclear fuel makes steamNeeds special safety and cooling water
Solar, wind, biomass, tidalNon-conventional (renewable)Panels, turbines, gas from wasteWhere sun, wind or wastes are plentiful

Coal, oil and gas are exhaustible: once used they cannot be replaced in a human lifetime, and burning them adds carbon dioxide to the air. Water, wind and sun are renewable. Many countries are increasing their share of renewable power to reduce pollution and dependence on imported fuel.

Power and location

  • Power-intensive industries such as aluminium look for cheap electricity.
  • Thermal power stations are often near coalfields or ports, to cut fuel transport cost.
  • Hydro-electric power is cheapest where a river drops over high ground, which is often in hills far from towns.
  • A reliable grid lets industries spread out away from the power source.

Measuring energy

Power is the rate of using energy and is measured in kilowatts (kW). Energy used is power x time, in kilowatt-hours (kWh). One kWh is the 'unit' charged on an electricity bill. Cost = energy in kWh x price per kWh.

Worked example 1: one machine

A machine is rated at 5 kW and runs for 8 hours. Energy = 5 x 8 = 40 kWh. If a unit costs 6 rupees (an illustrative price), the cost is 40 x 6 = 240 rupees. If the price rises to 8 rupees, the cost becomes 40 x 8 = 320 rupees, an increase of 80 rupees, which is 80 / 240 x 100, about 33 per cent.

Worked example 2: a small workshop

A workshop has 20 machines of 5 kW each, and all run for 8 hours a day on 26 days in a month. Total power = 20 x 5 = 100 kW. Energy per day = 100 x 8 = 800 kWh. Energy per month = 800 x 26 = 20,800 kWh. At 6 rupees per unit the bill is 20,800 x 6 = 1,24,800 rupees. If a rooftop solar plant supplied a quarter of this energy, the grid supply would be 20,800 x 0.75 = 15,600 kWh, a saving of 5,200 kWh.

Energy (kWh) = power (kW) x hours. Cost = energy x price per unit. Power-hungry industries go where power is cheap.

— Rule to remember

Key takeaways

  • Coal, oil, gas and hydro are conventional; nuclear, sun, wind, biomass and tides are non-conventional (nuclear is not renewable).
  • Fossil fuels are exhaustible; renewable sources are not.
  • Energy in kWh is power in kW times hours.

Check your understanding

  1. 1. Which of these is a non-conventional source of power?

    1. Coal
    2. Petroleum
    3. Natural gas
    4. Wind
    Show answer

    Answer: D. Wind is renewable and non-conventional. Coal, oil and gas are fossil fuels.

  2. 2. A 3 kW machine runs for 10 hours. Energy used is:

    1. 13 kWh
    2. 30 kWh
    3. 0.3 kWh
    4. 3 kWh
    Show answer

    Answer: B. Energy = 3 x 10 = 30 kWh.

  3. 3. If 30 kWh cost 6 rupees per unit, the cost is:

    1. 36 rupees
    2. 5 rupees
    3. 180 rupees
    4. 60 rupees
    Show answer

    Answer: C. 30 x 6 = 180 rupees.

  4. 4. Which industry is most dependent on very cheap electricity?

    1. Bakery and bread making
    2. Cloth printing and dyeing
    3. Software development work
    4. Aluminium smelting
    Show answer

    Answer: D. Aluminium smelting uses a huge amount of electricity, so power cost decides the site.

  5. 5. Fossil fuels are described as exhaustible because:

    1. they cannot be replaced in a human lifetime once used
    2. they are found only under the deep sea floor
    3. they are always bought from other countries
    4. they can never be burned in an industrial furnace
    Show answer

    Answer: A. Coal, oil and gas took millions of years to form and cannot be replaced quickly.

Privacy · Terms · Refunds · Delivery