- Foundation
- About 13 min
- 5 practice questions
Transport, ports and footloose industries
Choose the best transport mode for a given cargo, calculate freight cost, and explain why some industries are free to locate almost anywhere.
If something looks wrong, please tell us.
A factory is only useful if materials can reach it and goods can leave it. Transport links decide how far an industry can draw its materials and how far it can sell its products. In this lesson you will match modes of transport to cargo, calculate a simple freight bill and meet the footloose industries, which are less tied to any one place.
Modes of transport and what they carry
| Mode | Strengths | Best for |
|---|---|---|
| Road | Door-to-door service, flexible, good for short distances | Perishable goods, short hauls, small loads |
| Rail | Cheap for heavy goods over long distances | Coal, ore, cement, grain |
| Water (rivers, coasts, sea) | Cheapest per tonne for bulk; slow | Ore, oil, coal, containers |
| Air | Very fast but costly | Light, high-value or urgent goods such as medicines and electronics |
| Pipeline | Steady and cheap for liquids and gases, no vehicle needed | Crude oil, natural gas, water |
Ports are important to industry because they connect a country with overseas markets and sources. A port brings imported raw materials and machinery in and sends exports out, so large industrial clusters often grow around ports.
Freight cost
A simple estimate is cost = weight (tonnes) x distance (km) x rate per tonne-km. The rate is lower for rail and water than for road or air.
Worked example 1: a freight bill
A cement plant sends 200 tonnes by road for 300 km at an illustrative rate of 2 rupees per tonne-km. Cost = 200 x 300 x 2 = 1,20,000 rupees, or 1.2 lakh rupees. If the same load goes by rail at 1 rupee per tonne-km, the cost is 200 x 300 x 1 = 60,000 rupees, which is half. Rail is the better choice for a heavy cargo over a long distance, unless the buyer needs door delivery or the load is small.
Footloose industries
A footloose industry is not tied to a particular source of raw material or to a particular market. Such industries make light, high-value goods and use little bulky material, so transport is a small part of their cost. Software, electronic assembly, watch making and some medicine production are examples. They choose places with skilled workers, good communications, reliable power, good education and a pleasant environment, and may also look for government support in industrial parks.
| Industry | Why |
|---|---|
| Steel | Tied to ore and coal, which are heavy |
| Sugar | Tied to cane fields, because cane spoils and loses weight |
| Bread | Tied to the market, because it is perishable |
| Software | Footloose: the product is information, not a heavy material |
Worked example 2: choosing a site
A company plans a unit that designs mobile phone software. It can pick a coastal city with a port but few engineers, or an inland city with many engineers, good internet and an airport. Which is better? Working: the product has no weight and needs no bulky material, so the port is not helpful. What matters is skilled labour and communications. The company should choose the inland city with engineers, internet and an airport. If the company instead made steel, the port or the ore field would matter far more.
Heavy and bulky: rail or water. Perishable: road or air. Liquids and gases: pipeline. Light and valuable: air. Footloose industries follow skills and communications.
Key takeaways
- Rail and water suit bulky goods; air suits light, valuable ones.
- Freight cost is weight x distance x rate.
- Footloose industries are free of raw material and market ties and follow skills and services.
Check your understanding
-
1. Which mode is best for carrying crude oil over a long distance in large quantity?
- Pipeline
- Air freight
- A cycle cart
- A bullock cart
Show answer
Answer: A. Pipelines move liquids and gases steadily at low cost.
-
2. The freight cost of 100 tonnes over 200 km at 2 rupees per tonne-km is:
- 20,000 rupees
- 40,000 rupees
- 4,000 rupees
- 400 rupees
Show answer
Answer: B. 100 x 200 x 2 = 40,000 rupees.
-
3. Which of these industries is footloose?
- Iron and steel making
- Sugar milling from cane
- Software development
- Cement manufacture
Show answer
Answer: C. Software has little weight and needs skilled people, not bulky raw materials.
-
4. Why do many big industrial clusters grow near ports?
- Ports have no use for ships or cargo
- Ports are always cold and windy places
- Ports reduce the demand for all goods
- Ports link industry to overseas trade
Show answer
Answer: D. A port brings in raw materials and machinery and sends out exports.
-
5. Which mode is usually the cheapest per tonne for very bulky cargo over long distances?
- Water transport
- Air freight by plane
- Motorcycles on roads
- Mule trains on tracks
Show answer
Answer: A. Water transport has a low cost per tonne-km for bulk goods, although it is slow.
Sign in to keep track of the lessons you finish.