Revision notes

Industries: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What industry is and how it is classified

Ways to classify industries
BasisGroupsExample
Raw materialAgro-based, mineral-based, forest-based, animal-basedCotton textile is agro-based; iron and steel is mineral-based
SizeSmall-scale, large-scaleA village potter vs a steel plant
OwnershipPublic, private, joint, cooperativeA state-owned plant vs a family firm
RoleBasic (key) and consumerSteel is basic; biscuits are consumer

Primary takes from nature, secondary makes things, tertiary gives services.

— Remember
Read the full lesson

Lesson 2

Factors that decide where an industry is located

Heavy and perishable raw material pulls industry to the source; perishable products pull it to the market.

— Remember
Read the full lesson

Lesson 3

Iron and steel industry

Steel needs ore, coking coal and limestone; so the plant goes near the mines.

— Remember
Read the full lesson

Lesson 4

Textile and agro-based industries

Agro-based industries
IndustryRaw materialLocation logic
Cotton textileCottonCotton areas, markets and ports
JuteJute fibreJute-growing delta, near rivers
SugarSugarcaneRight beside cane fields

Agro-based industry follows the farm: sugar at the field, jute in the delta, cotton in cotton country.

— Remember
Read the full lesson

Lesson 5

Industry and the environment

Treat the waste, clean the smoke, recycle the water, plant a green belt.

— Remember
Read the full lesson

Lesson 6

Cement, aluminium and chemical industries

Summary
IndustryMain raw materialsMain location pull
CementLimestone, clay, gypsum, coalLimestone deposits
AluminiumBauxite and electricityCheap power (and bauxite)
ChemicalsSalt, minerals, coal, petroleum productsRaw materials, ports, markets

Cement goes where limestone is. Aluminium goes where cheap power is. Chemical plants go where raw materials, ports or markets are.

— Rule to remember
  • Cement is heavy-raw-material based: limestone, clay, gypsum and coal.
  • Aluminium is power-intensive: bauxite plus much electricity.
  • Chemicals are varied: heavy chemicals, fertilisers, plastics, medicines and more.
Read the full lesson

Lesson 7

Small-scale and cottage industries: why they matter

Cottage, small and large
TypeHow it worksExamples
Cottage (household) industryDone at home, mostly by family members, with simple tools and local materialPottery, basket making, handloom weaving, hand-made toys
Small-scale industryA workshop or small factory with a few workers and modest machinesA bakery, a small furniture workshop, a printing press
Large-scale industryA big factory with many workers, big machines and large capitalSteel plant, cement plant, car factory

Cottage: home and family. Small: workshop with few workers. Large: big factory. Small units give jobs and use local material but struggle with credit and marketing.

— Rule to remember
  • Cottage industries work at home with simple tools; small-scale units use modest capital.
  • They create jobs at a lower capital cost per job.
  • Credit, marketing and competition are their main difficulties.
Read the full lesson

Lesson 8

Power for industry: conventional and non-conventional sources

Sources of power
SourceKindHow it is usedLocation note
CoalConventional, fossil fuelHeat for furnaces and thermal power stationsNear coalfields, or reached by rail or ports
Petroleum and natural gasConventional, fossil fuelFuel, chemicals, power stationsNear refineries and pipelines
Hydro-electricityConventional, flowing waterTurbines at damsNeeds a river with a good flow and fall
NuclearNon-conventional (not renewable)Heat from splitting atoms in nuclear fuel makes steamNeeds special safety and cooling water
Solar, wind, biomass, tidalNon-conventional (renewable)Panels, turbines, gas from wasteWhere sun, wind or wastes are plentiful

Energy (kWh) = power (kW) x hours. Cost = energy x price per unit. Power-hungry industries go where power is cheap.

— Rule to remember
  • Coal, oil, gas and hydro are conventional; nuclear, sun, wind, biomass and tides are non-conventional (nuclear is not renewable).
  • Fossil fuels are exhaustible; renewable sources are not.
  • Energy in kWh is power in kW times hours.
Read the full lesson

Lesson 9

Transport, ports and footloose industries

Choosing a mode
ModeStrengthsBest for
RoadDoor-to-door service, flexible, good for short distancesPerishable goods, short hauls, small loads
RailCheap for heavy goods over long distancesCoal, ore, cement, grain
Water (rivers, coasts, sea)Cheapest per tonne for bulk; slowOre, oil, coal, containers
AirVery fast but costlyLight, high-value or urgent goods such as medicines and electronics
PipelineSteady and cheap for liquids and gases, no vehicle neededCrude oil, natural gas, water
Tied or footloose?
IndustryWhy
SteelTied to ore and coal, which are heavy
SugarTied to cane fields, because cane spoils and loses weight
BreadTied to the market, because it is perishable
SoftwareFootloose: the product is information, not a heavy material

Heavy and bulky: rail or water. Perishable: road or air. Liquids and gases: pipeline. Light and valuable: air. Footloose industries follow skills and communications.

— Rule to remember
  • Rail and water suit bulky goods; air suits light, valuable ones.
  • Freight cost is weight x distance x rate.
  • Footloose industries are free of raw material and market ties and follow skills and services.
Read the full lesson

Privacy · Terms · Refunds · Delivery