• Foundation
  • About 14 min
  • 5 practice questions

From ore to metal: mining, smelting and refining

Describe surface and underground mining, then follow iron ore to steel and bauxite to aluminium, with simple yield calculations.

If something looks wrong, please tell us.

A mineral in the ground is not yet a useful metal. It has to be dug out, separated from waste rock, heated, and purified. This lesson follows the journey in simple steps and shows how to work out how much metal a given amount of ore can yield.

Mining methods

  • Opencast (surface) mining: the soil and rock above are removed to reach deposits near the surface. It is cheaper and used for many coal and iron ore deposits.
  • Shaft (underground) mining: a vertical shaft is sunk and tunnels follow the deposit when it lies deep. It is costlier and more dangerous.
  • Quarrying: stone, limestone and similar rocks are cut from open pits.
  • Alluvial or placer mining: metals such as gold are washed from river sands.

The usual steps

  1. Mining the ore.
  2. Crushing and concentration: waste rock is separated so that the ore is richer.
  3. Smelting: the concentrated ore is heated with a substance that removes oxygen, giving the crude metal.
  4. Refining: impurities are removed to give pure metal or an alloy.

Iron and steel

In a blast furnace, iron ore is heated with coke (made from coal), which removes the oxygen, and with limestone, which combines with impurities to form slag. The product is pig iron, which is brittle because of its carbon. In making steel, excess carbon is removed and other metals such as manganese may be added. Steel is an alloy: a mixture of metals, or of a metal with another element, with improved properties.

Aluminium

Bauxite is first purified to give alumina (aluminium oxide). The alumina is then split into aluminium by passing a strong electric current through it, a process called electrolysis. It needs a great deal of electricity, which is why aluminium plants are built near cheap power.

The grade of an ore is the percentage of metal it contains. High-grade ores are cheaper to process. As the richest deposits are used up, poorer ores have to be mined, which costs more in energy and leaves more waste rock behind.

Worked example 1: yield of iron

Question: An ore contains 60 percent iron. How much iron is in 1 tonne at full recovery, and how much if only 90 percent is recovered? Working: 1 tonne = 1,000 kg. Iron present = 0.60 x 1,000 = 600 kg. At 90 percent recovery = 0.90 x 600 = 540 kg. Answer: 600 kg at full recovery and 540 kg at 90 percent recovery.

Worked example 2: a poor copper ore

Question: A copper ore holds 2 percent copper. How much copper is in 500 kg of ore? Working: 0.02 x 500 = 10 kg. Answer: 10 kg. Such a poor ore is worth mining only if the metal is valuable and the process is cheap, which is why concentration matters.

Worked example 3: choose the method

Question: A coal seam lies a few metres below the surface over a wide area. Which mining method suits? Working: shallow, wide deposits are reached cheaply by removing the cover. Answer: opencast mining.

Mine, concentrate, smelt, refine; iron needs coke and limestone; aluminium needs electricity.

— Remember

Key takeaways: shallow deposits are mined from the surface and deep ones by shafts; ore grade is the percentage of metal; steel is an alloy of iron.

Check your understanding

  1. 1. A deep coal seam is usually reached by:

    1. Panning
    2. Opencast mining
    3. Quarrying
    4. Shaft mining
    Show answer

    Answer: D. Deep deposits require shafts and tunnels.

  2. 2. In a blast furnace, limestone is added to:

    1. Remove impurities as slag
    2. Make the furnace cooler
    3. Add carbon to the iron
    4. Colour the molten metal
    Show answer

    Answer: A. Limestone combines with impurities to form slag, which is removed.

  3. 3. An ore has 40 percent metal. The metal in 2,000 kg of ore at full recovery is:

    1. 400 kg
    2. 1,200 kg
    3. 800 kg
    4. 80 kg
    Show answer

    Answer: C. 0.40 x 2,000 = 800 kg.

  4. 4. Aluminium is obtained from alumina by:

    1. Burning with coke
    2. Washing with water
    3. Electrolysis
    4. Cooling in air
    Show answer

    Answer: C. Electrolysis splits alumina into aluminium and needs much electricity.

  5. 5. Steel is best described as:

    1. A pure metal
    2. An alloy based on iron
    3. A non-metallic mineral
    4. A fuel mineral
    Show answer

    Answer: B. Steel is an alloy: iron with a little carbon and sometimes other elements.

Privacy · Terms · Refunds · Delivery