• Foundation
  • About 14 min
  • 5 practice questions

How electricity is made: thermal, hydro and nuclear power

Trace the energy chain in thermal, hydroelectric and nuclear plants and calculate energy used and its cost in kilowatt-hours.

If something looks wrong, please tell us.

Coal, falling water and uranium look very different, but power stations that use them share one idea: they turn a shaft that drives a generator. This lesson compares the three and teaches the unit of energy used on an electricity bill.

The common idea

A generator produces electricity when it is turned. A turbine, which is like a wheel with blades, turns the generator. What differs is what pushes the turbine.

Three kinds of power station
TypeWhat turns the turbineEnergy source
ThermalSteam made by burning fuelCoal, oil or natural gas
HydroelectricFalling water from a reservoirWater stored at a height
NuclearSteam made by the heat from splitting atoms (fission)Uranium

In a thermal station fuel heats water to steam, the steam turns the turbine, and the generator makes electricity. In a hydroelectric station water falls through pipes onto the turbine; no fuel is burnt. In a nuclear station the splitting of uranium atoms gives heat that makes steam. A nuclear station does not burn fuel and does not release carbon dioxide while working, but its waste needs careful, long-term handling.

Choosing a site

Each kind of station needs particular conditions. Hydroelectric stations need a steady flow of water and a drop in height, so they are built on rivers in hilly or mountainous country, usually with a dam. Thermal stations are built where fuel and water for steam can be had, near coalfields or near ports that bring fuel. Nuclear stations need plenty of water for cooling and are placed with great attention to safety and distance from crowded areas.

Measuring energy

Power is the rate of using energy and is measured in watts (W); 1 kilowatt (kW) = 1,000 watts. Energy = power x time. The unit on an electricity bill is the kilowatt-hour (kWh), also called a unit: the energy used by a 1 kW appliance running for 1 hour.

Worked example 1: a heater

Question: A 2 kW heater runs for 3 hours. How much energy is used? Working: 2 kW x 3 h = 6 kWh. Answer: 6 kWh, or 6 units.

Worked example 2: the cost

Question: If a unit costs 7 rupees (an illustrative rate, not an official tariff), what is the cost of the 6 units? Working: 6 x 7 = 42 rupees. Answer: 42 rupees.

Worked example 3: bulbs

Question: Five bulbs of 40 W each burn for 6 hours. How many units are used? Working: total power = 5 x 40 = 200 W = 0.2 kW. Energy = 0.2 x 6 = 1.2 kWh. Answer: 1.2 units.

Worked example 4: order the chain

Question: Arrange the steps in a hydroelectric station: generator makes electricity, water falls, turbine turns, reservoir stores water. Working: water is stored first, then falls, then turns the turbine, which turns the generator. Answer: reservoir stores water, water falls, turbine turns, generator makes electricity.

Energy (kWh) = power (kW) x time (hours). Turbine turns generator; the energy source differs.

— Remember

Key takeaways: every power plant turns a turbine; fuel, water or atoms supply the push; convert watts to kilowatts before multiplying.

Check your understanding

  1. 1. What does the turbine in a power station do?

    1. Stores the coal
    2. Runs the generator
    3. Cools the steam
    4. Heats the water
    Show answer

    Answer: B. The turbine's shaft turns the generator, which produces electricity.

  2. 2. Which plant needs no fuel to be burnt but needs a reservoir of water at a height?

    1. A coal plant
    2. A gas plant
    3. A solar plant
    4. A hydro plant
    Show answer

    Answer: D. A hydroelectric plant uses falling water.

  3. 3. A 1.5 kW iron is used for 2 hours. The energy used is:

    1. 3 kWh
    2. 0.75 kWh
    3. 1.5 kWh
    4. 30 kWh
    Show answer

    Answer: A. 1.5 x 2 = 3 kWh.

  4. 4. Four lamps of 25 W burn for 10 hours. The units used (kWh) are:

    1. 0.25
    2. 25
    3. 10
    4. 1
    Show answer

    Answer: D. Total power = 4 x 25 = 100 W = 0.1 kW. Energy = 0.1 x 10 = 1 kWh.

  5. 5. Nuclear power stations get heat from:

    1. Burning wood and coal
    2. Direct sunlight on cells
    3. Splitting heavy atoms
    4. Falling water from a dam
    Show answer

    Answer: C. Nuclear fission of heavy atoms releases heat that makes steam.

Privacy · Terms · Refunds · Delivery