- Foundation
- About 13 min
- 5 practice questions
Non-metallic minerals: mica, limestone, gypsum and salt
Describe the main non-metallic minerals, the property that makes each useful, and match each to its everyday uses.
If something looks wrong, please tell us.
Metals get most of the attention, but many industries depend on minerals that are not mined as a source of metal. They are used in buildings, electrical goods, farming and food. This lesson looks at four of them and links each one to the property that makes it useful. Learn the property and the use follows.
Mica
Mica splits easily into very thin, clear, flexible sheets. It does not conduct electricity, it resists heat and it does not break down under high voltage. These properties make it an excellent insulator, so it is used in electrical and electronic equipment and in heating appliances.
Limestone
Limestone is a sedimentary rock made mainly of calcium carbonate. It is the main raw material for cement, and it is used as a flux in iron and steel making, where it combines with impurities to form slag. It also gives lime for chemicals and for agriculture. A small drop of dilute acid makes limestone fizz because carbon dioxide is released.
Gypsum
Gypsum is a soft mineral made of calcium sulphate with water. When heated it gives plaster of Paris, which is used to set broken bones, to make moulds and to finish walls. A little gypsum is added to cement to control its setting. It is also used in farming to improve some soils.
Common salt
Salt is sodium chloride. It is obtained from sea water by letting the sun evaporate the water in shallow salt pans, from salt lakes, and by mining rock salt. It is needed as food and as a raw material for the chemical industry.
| Mineral | Key property | Main uses |
|---|---|---|
| Mica | Insulator, splits into thin sheets | Electrical and electronic goods |
| Limestone | Calcium carbonate, reacts with acid | Cement, flux in steel making, lime |
| Gypsum | Soft, sets when mixed with water after heating | Plaster of Paris, setting of cement |
| Salt | Dissolves in water, recovered by evaporation | Food, chemical industry |
Worked example 1: match the need
Question: A maker of electric irons needs a material that stays solid when hot and does not carry current between the heating element and the body. Which mineral suits? Working: the need is for heat resistance and electrical insulation. Mica has both properties. Answer: mica.
Worked example 2: salt from sea water
Question: Suppose sea water contains 3 percent salt by weight (an illustrative figure). How much salt remains if 2,000 kg of sea water is fully dried? Working: 3 percent of 2,000 = 0.03 x 2,000 = 60 kg. Answer: 60 kg of salt. Sunshine and wind do the drying, which is why salt pans are common on dry, sunny coasts.
Worked example 3: which raw material?
Question: A cement factory is to be built. Which non-metallic mineral must it have in large quantity? Working: cement is made mainly from limestone, with a little gypsum added. Answer: limestone.
Mica insulates; limestone builds and cleans; gypsum sets; salt flavours and feeds industry.
Key takeaways: non-metallic minerals are not mined for a metal; each is chosen for a property; limestone and gypsum are linked to cement, and mica to electrical goods.
Check your understanding
-
1. Which mineral is used as an insulator in electrical equipment?
- Limestone
- Gypsum
- Salt
- Mica
Show answer
Answer: D. Mica does not conduct electricity and resists heat, so it is an insulator.
-
2. The main raw material for cement is:
- Mica flakes
- Limestone rock
- Bauxite rocks
- Copper metal
Show answer
Answer: B. Cement is made chiefly from limestone, with a little gypsum.
-
3. Plaster of Paris is made by heating:
- Salt
- Mica
- Gypsum
- Limestone
Show answer
Answer: C. Heating gypsum gives plaster of Paris, which sets when mixed with water.
-
4. In one tonne (1,000 kg) of sea water with 3 percent salt (illustrative), how much salt is there?
- 3 kg
- 30 kg
- 300 kg
- 0.3 kg
Show answer
Answer: B. 0.03 x 1,000 = 30 kg.
-
5. Common salt can be obtained from:
- Evaporating sea water in pans
- Melting bauxite in ovens
- Burning coal in furnaces
- Splitting mica in sheets
Show answer
Answer: A. Salt is obtained by evaporating sea water, from salt lakes, and by mining rock salt.
Sign in to keep track of the lessons you finish.