- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Applications of derivatives practice
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions first, writing your answer and a line of working for each, and only then open the explanations. The questions are a little harder than the lesson checks and mix the methods of all five lessons. Watch for the traps from the course: signs, radians, the domain, roots outside the allowed range, and answering the question that was asked.
Final self-assessment
-
1. Using differentials with a = 64, what is the approximate value of ∛65?
- 4 + 1/48
- 4 + 1/16
- 4 + 1/24
- 4 + 1/12
Show answer
Answer: A. f(x) = x^(1/3), f(64) = 4, f′(x) = 1/(3x^(2/3)) = 1/(3 × 16) = 1/48 at x = 64. So ∛65 ≈ 4 + 1/48 ≈ 4.0208.
-
2. The radius of a sphere is measured with an error of 2%. What is the approximate percentage error in its surface area?
- 2%
- 6%
- 4%
- 8%
Show answer
Answer: C. S = 4πr², so dS/S = 2·dr/r. The percentage error in S is about 2 × 2% = 4%. (6% would be the error in the volume.)
-
3. If f(x) = x³ − 7x² + 15, what is the approximate value of f(5.001) using differentials?
- −35.005
- −34.95
- −34.995
- −35.05
Show answer
Answer: C. f(5) = 125 − 175 + 15 = −35 and f′(x) = 3x² − 14x = 75 − 70 = 5 at x = 5. So f(5.001) ≈ −35 + 0.001 × 5 = −34.995.
-
4. The top of a 5 m ladder slides down a wall at 0.6 m/s. How fast is the foot moving away from the wall when the top is 3 m above the ground?
- 0.45 m/s
- 0.8 m/s
- 0.6 m/s
- 0.36 m/s
Show answer
Answer: A. x² + y² = 25 gives x(dx/dt) + y(dy/dt) = 0. When y = 3, x = 4, and dy/dt = −0.6. So 4(dx/dt) = 3 × 0.6 = 1.8, giving dx/dt = 0.45 m/s.
-
5. Water drains at 4π cm³/s from a conical funnel, vertex down, of height 12 cm and top radius 6 cm. How fast is the water level falling when the depth is 8 cm?
- 1/16 cm/s
- 1/2 cm/s
- 1/4 cm/s
- 1 cm/s
Show answer
Answer: C. By similar triangles r = h/2, so V = (1/3)π(h/2)²h = πh³/12 and dV/dt = (πh²/4)(dh/dt). At h = 8: −4π = 16π(dh/dt), so dh/dt = −1/4: the level falls at 1/4 cm/s.
-
6. A particle moves along the curve y² = 12x. At which point is its y-coordinate increasing at twice the rate of its x-coordinate?
- (3, 6)
- (1/3, 2)
- (12, 12)
- (3/4, 3)
Show answer
Answer: D. 2y(dy/dt) = 12(dx/dt), so dy/dt = (6/y)(dx/dt). Setting 6/y = 2 gives y = 3, and then x = 9/12 = 3/4. The point is (3/4, 3); the other points lie on the curve but give ratios 1, 3 and 1/2.
-
7. What is the equation of the normal to the curve x = t², y = t³ at t = 1?
- 3x − 2y − 1 = 0
- 2x + 3y − 5 = 0
- 3x + 2y − 5 = 0
- 2x − 3y + 1 = 0
Show answer
Answer: B. The point is (1, 1) and dy/dx = 3t²/(2t) = 3t/2 = 3/2. The normal has slope −2/3: y − 1 = −(2/3)(x − 1), so 3y − 3 = −2x + 2, that is 2x + 3y − 5 = 0. (3x − 2y − 1 = 0 is the tangent.)
-
8. For which values of m is the line y = mx + 1 a tangent to the curve y = x² + 2?
- m = 2 only
- m = 1 or m = −1
- m = 2 or m = −2
- m = 4 or m = −4
Show answer
Answer: C. x² + 2 = mx + 1 gives x² − mx + 1 = 0. For a tangent the discriminant is zero: m² − 4 = 0, so m = ±2. Both slopes work, touching at x = 1 and x = −1.
-
9. The tangent to y = x³ at (1, 1) meets the curve again at which point?
- (−2, −8)
- (2, 8)
- (−1, −1)
- (0, −2)
Show answer
Answer: A. The tangent at (1, 1) has slope 3, so it is y = 3x − 2. Then x³ = 3x − 2 gives x³ − 3x + 2 = (x − 1)²(x + 2) = 0. The double root x = 1 is the point of contact; the other is x = −2, giving (−2, −8).
-
10. For which values of k is f(x) = kx³ − 9kx² + 9x + 3 increasing for every real x?
- k ≥ 1/3
- 0 ≤ k ≤ 1/3
- 0 < k < 3
- k ≤ 0
Show answer
Answer: B. f′(x) = 3kx² − 18kx + 9. If k = 0, f′ = 9 > 0, which works. If k ≠ 0 we need k > 0 and discriminant ≤ 0: 324k² − 108k ≤ 0, so k(3k − 1) ≤ 0, that is 0 < k ≤ 1/3. Together: 0 ≤ k ≤ 1/3. (A negative k makes f′ negative for large x.)
-
11. Which statement about f(x) = (x − 1)/(x + 2) is correct?
- f is increasing on (−∞, −2) and on (−2, ∞), but not on its whole domain
- f is increasing on its whole domain
- f is decreasing on (−∞, −2)
- f has a local maximum at x = −2
Show answer
Answer: A. f′(x) = [(x + 2) − (x − 1)]/(x + 2)² = 3/(x + 2)² > 0 for every x ≠ −2, so f increases on each piece. But f(−3) = 4 while f(0) = −1/2, so it is not increasing across the break. f is undefined at −2, so it has no maximum there.
-
12. By considering g(x) = x − sin x, which inequality holds for every x > 0?
- sin x > x
- sin x ≥ x for 0 < x < π/2
- sin x < x
- sin x = x for some x > 0
Show answer
Answer: C. g(0) = 0 and g′(x) = 1 − cos x ≥ 0, equal to 0 only at isolated points, so g is increasing and g(x) > 0 for x > 0. Hence sin x < x for every x > 0, which rules out the other three statements.
-
13. Equal squares are cut from the corners of a 45 cm × 24 cm sheet and the sides folded up to make an open box of greatest volume. What is the side of each square?
- 18 cm
- 5 cm
- 6 cm
- 4 cm
Show answer
Answer: B. V = x(45 − 2x)(24 − 2x) = 4x³ − 138x² + 1080x. V′ = 12x² − 276x + 1080 = 12(x − 5)(x − 18). x = 18 is impossible (it exceeds half of 24), so x = 5 cm, giving V = 5 × 35 × 14 = 2450 cm³.
-
14. A closed cylindrical tin must hold 250π cm³. What is the least possible total surface area?
- 150π cm²
- 100π cm²
- 250π cm²
- 125π cm²
Show answer
Answer: A. S = 2πr² + 2V/r = 2πr² + 500π/r. S′ = 4πr − 500π/r² = 0 gives r³ = 125, r = 5 and h = 250/25 = 10 (h = 2r). S = 50π + 100π = 150π cm².
-
15. A closed box with a square base must hold 256 cm³. Material for the top and bottom costs ₹4 per cm² and for the sides ₹1 per cm². What side of the base gives the least cost?
- 4 cm
- 8 cm
- ∛256 cm
- 2 cm
Show answer
Answer: A. With base x and height h, x²h = 256. Cost C = 4(2x²) + 1(4xh) = 8x² + 1024/x. C′ = 16x − 1024/x² = 0 gives x³ = 64, x = 4 cm (height 16 cm), and C″ > 0. The cost is 128 + 256 = ₹384, less than for a cube of side ∛256.
Where to revise: Questions 1-3 come from lesson 1 (approximations and errors). Questions 4-6 come from lesson 2 (related rates). Questions 7-9 come from lesson 3 (tangents and normals). Questions 10-12 come from lesson 4 (monotonicity). Questions 13-15 come from lesson 5 (optimisation problems).
Sign in to keep track of the lessons you finish.