Revision notes

Inequalities: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Inequality symbols and simple chains

SymbolMeaningExample
>is greater than7 > 3
<is less than3 < 7
=is equal to5 = 5
>=is greater than or equal to6 >= 6 and 7 >= 6
<=is less than or equal to4 <= 4 and 4 <= 5

Chaining two statements

  1. A > B and B > C Two relations share the term B.
  2. Join: A > B > C Write them in one line through the shared term.
  3. So A > C The chain keeps its direction from left to right.
Combining two links in the same direction
First linkSecond linkResult
>>>
>>=>
>=>=>=
>==>=
=>>

Join statements into one chain. The chain is strict only if at least one link is strict.

— Rule to remember
  • Chain statements through the shared letter.
  • A chain with at least one strict link is strict.
  • A strict relation (>) always implies the weaker one (>=).
Read the full lesson

Lesson 2

Direct inequalities: checking conclusions

Checking a conclusion

  1. Find both letters Locate the two letters of the conclusion in the chain.
  2. Read every link between Look at each symbol between the two letters.
  3. Same direction? All the same way (or =): the relation can be stated. Opposite directions: no relation is fixed.
  4. Strict or not A > conclusion needs at least one strict link.

Two letters can be compared only if every link between them points the same way. A 'valley' or a 'peak' in the middle breaks the comparison.

— Rule to remember
  • Find the letters in the chain and check all links between them.
  • Opposite-direction links break the comparison.
  • A strict conclusion needs a strict link; a >= conclusion does not.
Read the full lesson

Lesson 3

Coded inequalities

Solving coded inequalities

  1. Write the key Make a small table of the codes on your sheet.
  2. Translate the statement Rewrite it with the real symbols.
  3. Translate the conclusions Each conclusion is coded too.
  4. Chain and check Use the usual chain rules.
CodeMeaning
A # BA > B
A $ BA < B
A @ BA = B
A % BA >= B
A * BA <= B

Translate first, test second. Never try to reason with the coded signs directly.

— Rule to remember
  • Write the key down and translate each statement.
  • The key changes from question to question; do not rely on memory.
  • After translating, use the same chain rules.
Read the full lesson

Lesson 4

Either-or conclusions

If conclusion 1 isand conclusion 2 isEither 1 or 2 is true
X > YX <= YYes
X < YX >= YYes
X = YX is not equal to YYes

Either-or needs all three

  • Same two letters Both conclusions involve the same pair of letters.
  • Neither follows alone Test each conclusion on its own first.
  • Together they cover all cases
    • X > Y with X <= Y
    • X < Y with X >= Y
    • X = Y with X is not equal to Y

Either-or or neither?

  • Pair covers every case
    • Example 2: P < R and P >= R
    • Neither follows alone
    • Answer: either I or II is true
  • Pair leaves a case out
    • Example 4: A > C and A < C
    • A = C is also possible
    • Answer: neither follows

Either-or needs: same two letters, neither follows alone, and the two conclusions together cover all possibilities.

— Rule to remember
  • Test each conclusion alone first.
  • Check that the pair covers all cases.
  • > with <= and < with >= are the common complementary pairs.
Read the full lesson

Lesson 5

Mixed inequality practice

Routine for long statements

  1. Translate any codes
  2. Write the full chain From left to right.
  3. Mark the reversals Note where the direction of the links changes.
  4. Split at each reversal Letters on opposite sides cannot be compared directly.
  5. Check conclusions, then pairs Test each conclusion; then look for complementary pairs.

Mark each reversal in the chain. Letters on opposite sides of a reversal cannot be compared.

— Rule to remember
  • Mark peaks and valleys first.
  • Only letters connected by same-direction links can be compared.
  • Use either-or only for complementary pairs when neither conclusion follows alone.
Read the full lesson

Lesson 6

Reading a chain in reverse and rewriting it

OriginalSame meaning when reversed
A > BB < A
A >= BB <= A
A < BB > A
A <= BB >= A
A = BB = A

To reverse a relation, swap the letters and flip the sign. Swapping the letters alone changes the meaning.

— Rule to remember
  • A > B and B < A say the same thing.
  • To reverse a chain, reverse the letters and flip every sign.
  • A conclusion written backwards may be the statement in disguise.
  • Never swap letters without flipping the sign.
Read the full lesson

Lesson 7

Joining separate statements

Shape of the joined chainResult for the outer letters
Both links run the same way (A > B > C)They can be compared
Shared letter is above both (A < B > C)No relation
Shared letter is below both (A > B < C)No relation

Join the statements at their shared letter. If that letter is above both or below both, the outer letters have no relation.

— Rule to remember
  • Rewrite statements so the shared letter sits in the middle.
  • A shared letter that is a peak or a valley breaks the chain.
  • One strict sign anywhere in a same-direction chain makes the whole relation strict.
  • With three or more statements, build the chain one line at a time.
Read the full lesson

Lesson 8

Testing a conclusion with numbers

Numbers can disprove a conclusion but they cannot prove it. A proof comes from the chain.

— Rule to remember
  • Pick numbers that obey all the statements first.
  • A single counterexample is enough to reject a conclusion.
  • Try a set with equal values wherever the statement allows equality.
  • Do not accept a conclusion just because two or three sets support it.
Read the full lesson

Lesson 9

Negations and word forms

In wordsSymbol
A is greater than B; A exceeds BA > B
A is less than B; A is smaller than BA < B
A is equal to B; A is the same as BA = B
A is at least B; A is not less than BA >= B
A is at most B; A is not more than B; A is not greater than BA <= B
It is not true thatThen
A > BA <= B
A >= BA < B
A < BA >= B
A <= BA > B
A = BA is not equal to B, which means A > B or A < B

The negation of > is <=, and the negation of >= is <. Words such as 'at least' mean >=, and 'at most' means <=.

— Rule to remember
  • 'At least' and 'not less than' mean >=.
  • 'At most', 'not more than' and 'not greater than' mean <=.
  • The negation of a strict sign is a non-strict sign on the other side.
  • Write the symbols down before applying the chain rules.
Read the full lesson

Privacy · Terms · Refunds · Delivery