• Practice
  • About 15 min
  • 5 practice questions

Balancing a chemical equation step by step

Use the law of conservation of mass to explain why equations are balanced, and balance equations step by step by the trial-and-error method, changing only the factors in front of formulae.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Tell a balanced equation from an unbalanced one by counting atoms.
  • Explain why equations must be balanced.
  • Balance an equation step by step without changing any formula.

When silver nitrate solution and sodium chloride solution are mixed inside a closed flask, a white precipitate forms, yet the mass of the flask and its contents does not change. Atoms only rearrange; none appear or disappear. An equation must show this.

Law of conservation of mass: in any reaction, the total mass of each element in the reactants equals its total mass in the products. So the number of atoms of each element must be the same on both sides of an equation.

An equation in which the number of atoms of every element is the same on both sides is a balanced equation. If the numbers differ for any element, it is an unbalanced equation. For example, AgNO₃ + NaCl → AgCl + NaNO₃ has 1 Ag, 1 N, 3 O, 1 Na and 1 Cl on each side, so it is already balanced.

The steps of balancing (trial and error)

Balancing an equation

  1. Step 1: Write the equation Turn the word equation into formulae.
  2. Step 2: Count the atoms Make a table of each element on the left and the right.
  3. Step 3: Balance one element at a time Start with the compound having the most atoms, and with an element that is unequal. Put a factor in front of a formula.
  4. Step 4: Recheck and write the final equation Count every element again; repeat Step 3 until all are equal.

The golden rule: never change a formula. To get two sodium atoms you may write 2NaOH, but never Na₂OH, because that would be a different (and non-existent) substance.

Worked example 1: calcium hydroxide and nitric acid

Step 1: Ca(OH)₂ + HNO₃ → Ca(NO₃)₂ + H₂O.

Atom count before balancing
ElementLeftRight
Ca11
N12
O2 + 3 = 56 + 1 = 7
H2 + 1 = 32
  1. Biggest compound: Ca(NO₃)₂ (9 atoms). Nitrogen is unequal: 2 on the right, so write 2HNO₃.
  2. Recount: left H = 2 + 2 = 4, right H = 2. Write 2H₂O to make 4 hydrogen atoms on the right.
  3. Recheck oxygen: left 2 + (2 × 3) = 8; right 6 + 2 = 8. Equal.
  4. Final: Ca(OH)₂ + 2HNO₃ → Ca(NO₃)₂ + 2H₂O. Ca 1 = 1, N 2 = 2, O 8 = 8, H 4 = 4.

Worked example 2: aluminium and hydrochloric acid

Step 1: Al + HCl → AlCl₃ + H₂. Chlorine: 3 on the right, so try 3HCl; now H is 3 on the left but 2 on the right. Hydrogen comes in pairs on the right, so we need an even number on the left. The smallest number divisible by both 2 and 3 is 6: write 6HCl and 3H₂ (6 H each side). Then chlorine on the right needs 6, so 2AlCl₃, and aluminium needs 2Al. Final: 2Al + 6HCl → 2AlCl₃ + 3H₂. Check: Al 2 = 2, H 6 = 6, Cl 6 = 6.

Worked example 3: making ammonia

N₂ + H₂ → NH₃. Nitrogen: 2 on the left, so 2NH₃. Hydrogen on the right is now 2 × 3 = 6, so 3H₂. Final: N₂ + 3H₂ → 2NH₃. Check: N 2 = 2, H 6 = 6.

Common mistakes

  • Changing a subscript (writing H₃Cl or AlCl₂) instead of adding a factor.
  • Forgetting that a factor multiplies every atom in the formula: 2Ca(NO₃)₂ has 2 Ca, 4 N and 12 O.
  • Not rechecking all elements after the last change.
  • Leaving factors that can be divided by a common number, such as 4, 12, 4, 6 instead of 2, 6, 2, 3.

Key takeaways: mass is conserved, so atoms of each element must balance. Count, pick the largest compound, adjust one element at a time with factors, never change formulae, and recheck every element at the end.

Check your understanding

  1. 1. Why must a chemical equation be balanced?

    1. To show the speed of the reaction
    2. Because atoms are neither created nor destroyed, so mass is conserved
    3. To show the states of the substances
    4. Because products must be heavier than reactants
    Show answer

    Answer: B. By the law of conservation of mass, the total mass of each element stays the same during a reaction. So the number of atoms of each element must be equal on both sides.

  2. 2. To balance sodium in NaOH + H₂SO₄ → Na₂SO₄ + H₂O, what should you do?

    1. Change NaOH to Na₂OH
    2. Write 2NaOH
    3. Change Na₂SO₄ to NaSO₄
    4. Write 2H₂SO₄
    Show answer

    Answer: B. Formulae must never be changed. Putting the factor 2 in front of NaOH gives 2 sodium atoms on the left to match Na₂SO₄.

  3. 3. What are the factors in the balanced equation N₂ + H₂ → NH₃ (in order)?

    1. 1, 3, 2
    2. 1, 1, 2
    3. 2, 3, 2
    4. 1, 2, 3
    Show answer

    Answer: A. N: 2 on the left, so 2NH₃. H on the right is then 6, so 3H₂. N₂ + 3H₂ → 2NH₃, factors 1, 3, 2.

  4. 4. How many oxygen atoms are there in 3Ca(NO₃)₂?

    1. 6
    2. 9
    3. 3
    4. 18
    Show answer

    Answer: D. One Ca(NO₃)₂ has 2 × 3 = 6 oxygen atoms. Three units have 3 × 6 = 18 oxygen atoms.

  5. 5. Which equation is correctly balanced?

    1. Mg + HCl → MgCl₂ + H₂
    2. 2Mg + O₂ → MgO
    3. BaCl₂ + H₂SO₄ → BaSO₄ + 2HCl
    4. H₂ + O₂ → H₂O
    Show answer

    Answer: C. BaCl₂ + H₂SO₄ → BaSO₄ + 2HCl: Ba 1 = 1, Cl 2 = 2, H 2 = 2, S 1 = 1, O 4 = 4. Each of the others has an element with unequal numbers (Cl and H in the first, Mg and O in the second, O in the last).

Privacy · Terms · Refunds · Delivery