• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Chemical reactions and equations

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back at the lessons, then check each answer and read the explanation. For balancing questions, count every element on both sides before choosing.

Final self-assessment

  1. 1. Which pair contains one physical change and one chemical change, in that order?

    1. Cooking rice; melting butter
    2. Breaking a glass; digestion of food
    3. Rusting of iron; ripening of fruit
    4. Melting ice; evaporating water
    Show answer

    Answer: B. Breaking glass changes only shape (physical). Digestion forms new substances (chemical). The other pairs are in the wrong order or both of one kind.

  2. 2. In Zn(s) + 2HCl(aq) → ZnCl₂(aq) + H₂↑, what does the upward arrow show?

    1. Hydrogen is given off as a gas
    2. Hydrogen is a precipitate
    3. Heat is supplied
    4. The reaction is fast
    Show answer

    Answer: A. An upward arrow after a product shows that it is a gas that escapes. A downward arrow would show a precipitate.

  3. 3. Copper reacts with concentrated nitric acid to give a reddish-brown gas. Which gas is it?

    1. Nitric oxide (NO)
    2. Hydrogen
    3. Nitrogen dioxide (NO₂)
    4. Oxygen
    Show answer

    Answer: C. Cu + 4HNO₃ (concentrated) → Cu(NO₃)₂ + 2NO₂ + 2H₂O. Nitrogen dioxide is reddish-brown. Dilute nitric acid gives nitric oxide instead.

  4. 4. Balance: Fe + H₂O → Fe₃O₄ + H₂ (iron heated in steam). The factors in order are:

    1. 1, 1, 1, 1
    2. 3, 4, 1, 4
    3. 3, 2, 1, 2
    4. 2, 4, 1, 4
    Show answer

    Answer: B. Iron: 3 in Fe₃O₄, so 3Fe. Oxygen: 4 in Fe₃O₄, so 4H₂O. Hydrogen on the left is then 8, so 4H₂. 3Fe + 4H₂O → Fe₃O₄ + 4H₂. Check: Fe 3 = 3, O 4 = 4, H 8 = 8.

  5. 5. Balance: Na + O₂ → Na₂O. The factors in order are:

    1. 4, 1, 2
    2. 2, 1, 1
    3. 2, 1, 2
    4. 4, 2, 2
    Show answer

    Answer: A. O₂ gives 2 oxygen atoms, so 2Na₂O. That has 4 sodium atoms, so 4Na. 4Na + O₂ → 2Na₂O. Check: Na 4 = 4, O 2 = 2.

  6. 6. A white precipitate forms when barium chloride solution is added to sodium sulphate solution. The precipitate and reaction type are:

    1. NaCl; displacement
    2. BaSO₄; double displacement
    3. BaCl₂; combination
    4. Na₂SO₄; decomposition
    Show answer

    Answer: B. BaCl₂ + Na₂SO₄ → BaSO₄↓ + 2NaCl. The ions are exchanged and insoluble barium sulphate precipitates: double displacement.

  7. 7. Which reaction is a decomposition reaction?

    1. 2Mg + O₂ → 2MgO
    2. Fe + CuSO₄ → FeSO₄ + Cu
    3. NH₃ + HCl → NH₄Cl
    4. C₁₂H₂₂O₁₁ → 12C + 11H₂O on heating
    Show answer

    Answer: D. Sugar, a single reactant, breaks into carbon and water on heating, so it is a decomposition. The others are combination, displacement and combination.

  8. 8. Zinc is added to copper sulphate solution. What do you observe?

    1. The solution turns from colourless to blue
    2. The blue colour fades and reddish copper is deposited
    3. A yellow precipitate forms
    4. No change, as copper is more reactive
    Show answer

    Answer: B. Zinc is more reactive than copper and displaces it: CuSO₄ + Zn → ZnSO₄ + Cu. Zinc sulphate is colourless, so the blue colour fades and copper separates out.

  9. 9. Dissolving sodium hydroxide in water and adding calcium oxide to water are alike because both:

    1. Are exothermic
    2. Are endothermic
    3. Form a precipitate
    4. Are decomposition reactions
    Show answer

    Answer: A. Both release heat. The difference is that NaOH dissolving is a physical process, while CaO + H₂O → Ca(OH)₂ is a chemical (combination) reaction.

  10. 10. Milk sets into curd faster in summer than in winter. Which factor explains this?

    1. Particle size
    2. Concentration
    3. Catalyst
    4. Temperature
    Show answer

    Answer: D. A higher temperature increases the rate of the reactions involved, so curd forms sooner in warm weather.

  11. 11. Potassium chlorate decomposes slowly on heating but quickly when a little MnO₂ is added. MnO₂ is unchanged at the end. MnO₂ acts as:

    1. A reactant
    2. An oxidant
    3. A catalyst
    4. A product
    Show answer

    Answer: C. A substance that increases the rate of a reaction without undergoing any chemical change is a catalyst.

  12. 12. In PbO + C → Pb + CO, the substance reduced is:

    1. PbO
    2. C
    3. Pb
    4. CO
    Show answer

    Answer: A. Lead oxide loses oxygen to become lead, so it is reduced. Carbon gains oxygen to form carbon monoxide, so it is oxidised.

  13. 13. Ethyl alcohol is converted to acetic acid by acidified potassium dichromate. The dichromate acts as:

    1. A reducing agent
    2. A catalyst only
    3. A product
    4. An oxidising agent supplying nascent oxygen
    Show answer

    Answer: D. Acidified K₂Cr₂O₇ makes oxygen available as nascent oxygen [O], which oxidises ethyl alcohol to acetic acid. It is an oxidant.

  14. 14. In the rusting of iron, the reaction at the anode region is:

    1. O₂ + 4H⁺ + 4e⁻ → 2H₂O
    2. Fe → Fe²⁺ + 2e⁻
    3. Fe³⁺ + e⁻ → Fe²⁺
    4. 2H₂O → 2H₂ + O₂
    Show answer

    Answer: B. At the anode iron is oxidised, losing electrons: Fe → Fe²⁺ + 2e⁻. Oxygen is reduced at the cathode.

  15. 15. Which of these does NOT help prevent rancidity?

    1. Adding antioxidants
    2. Storing in airtight containers
    3. Leaving fried food open to air for days
    4. Keeping out oxygen
    Show answer

    Answer: C. Rancidity is air oxidation. Leaving food open to air for a long time encourages it; the other three reduce contact with oxygen or slow oxidation.

Questions 1-3: lesson 1 (reactions and writing equations). Questions 4-5: lesson 2 (balancing). Questions 6-8: lesson 3 (types of reactions). Questions 9-11: lesson 4 (heat changes and rate of reaction). Questions 12-15: lesson 5 (oxidation, reduction, corrosion and rancidity).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery