• Practice
  • About 16 min
  • 5 practice questions

Exothermic and endothermic changes, and the rate of a reaction

Classify processes and reactions as exothermic or endothermic, explain safe dilution of sulphuric acid, and describe five factors that change the rate of a chemical reaction.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Identify exothermic and endothermic processes and reactions.
  • Explain why concentrated sulphuric acid is added to water slowly, never the other way round.
  • Explain how the nature of reactants, particle size, concentration, temperature and a catalyst affect the rate of a reaction.

Heat is absorbed or given out in many processes and reactions. Reactions also differ in how fast they go: cooking gas catches fire in an instant, while iron rusts over months. This lesson looks at both ideas.

Exothermic and endothermic processes

Even physical changes involve heat. A process that absorbs heat from outside is endothermic; one that gives out heat is exothermic.

Heat in physical processes

  • Endothermic processes
    • Melting of ice
    • Dissolving potassium nitrate (KNO₃) in water: the solution becomes colder
  • Exothermic processes
    • Freezing of water into ice
    • Dissolving sodium hydroxide (NaOH) in water: the solution becomes warmer
    • Diluting concentrated sulphuric acid: a very large amount of heat is released

Safety: if water is poured into concentrated sulphuric acid, so much heat is released at once that the water can boil instantly and spatter acid, causing an accident. So the required amount of water is taken in a glass container and the acid is added to the water slowly, a little at a time, with constant stirring. Then only a small amount of heat is released at a time. (This is done only by a teacher.)

Exothermic and endothermic reactions

In an exothermic reaction heat is given out as reactants change into products. In an endothermic reaction heat is absorbed from the surroundings or has to be supplied continuously.

  • CaO(s) + H₂O(l) → Ca(OH)₂(aq) + Heat: exothermic.
  • HCl + NaOH → NaCl + H₂O + Heat: exothermic (neutralisation).
  • CaCO₃(s) + Heat → CaO(s) + CO₂(g): endothermic.
  • 2KClO₃(s) —Δ→ 2KCl(s) + 3O₂(g): endothermic (heat must be supplied).

Rate of a chemical reaction

Some reactions finish quickly (a white precipitate forms the moment dilute sulphuric acid meets barium chloride solution; baking soda fizzes at once in dilute acid). Others are slow (rusting of iron, erosion of rocks into soil, formation of alcohol from glucose by yeast). Even the same reaction can go at different rates: milk sets into curd faster in warm summer weather than in winter.

Factors affecting the rate of a reaction

  • Nature of reactants
    • A more reactive substance reacts faster
    • Aluminium reacts faster than zinc with dilute hydrochloric acid
  • Size of particles
    • Smaller particles react faster
    • Powdered limestone fizzes faster in acid than lumps of the same mass
  • Concentration
    • More concentrated reactants react faster
    • Concentrated HCl dissolves calcium carbonate faster than dilute HCl
  • Temperature
    • Higher temperature, faster reaction
    • Limestone does not decompose at room temperature but does on strong heating
  • Catalyst
    • A substance that increases the rate without itself undergoing any chemical change
    • MnO₂ speeds up the decomposition of KClO₃ and of H₂O₂

Worked example 1: which beaker fizzes faster?

Two beakers each hold the same volume of dilute hydrochloric acid. In beaker A you add 5 g of marble chips; in beaker B, 5 g of marble powder. Beaker B fizzes faster. The powder has far more surface exposed to the acid, so more particles react at the same moment. The total amount of carbon dioxide finally given off is the same, because the mass of marble is the same; only the speed differs.

Worked example 2: reasons from daily life

  • Food lasts longer in a refrigerator: the low temperature slows down the reactions that spoil it.
  • Enzymes in our body act as catalysts and speed up the reactions of digestion and other body processes.
  • Factories prefer fast reactions, because a faster rate gives more product in less time.
  • Ozone layer: whether it is maintained or depleted depends on the rates at which ozone is formed and destroyed.

Key takeaways: endothermic changes absorb heat and exothermic changes release it; this applies to both physical processes and chemical reactions. Add concentrated acid slowly to water, never water to acid. The rate of a reaction increases with more reactive reactants, smaller particles, higher concentration, higher temperature and a catalyst.

Check your understanding

  1. 1. When potassium nitrate dissolves in water, the solution becomes colder. This process is:

    1. Exothermic
    2. Endothermic
    3. A combination reaction
    4. A displacement reaction
    Show answer

    Answer: B. Heat is absorbed from the surroundings, so the temperature falls. A process that absorbs heat is endothermic. Dissolving is a physical process, not a reaction.

  2. 2. While diluting concentrated sulphuric acid, the correct method is to:

    1. Pour water quickly into the acid
    2. Heat the acid first
    3. Add the acid slowly to water with constant stirring
    4. Add both at once into an empty beaker
    Show answer

    Answer: C. Dilution releases a great deal of heat. Adding small amounts of acid to a larger amount of water, with stirring, releases only a little heat at a time and avoids spattering.

  3. 3. Which factor explains why lumps of a tile take longer to disappear in hydrochloric acid than the same mass of powdered tile?

    1. Size of particles
    2. Temperature
    3. Catalyst
    4. Nature of the acid
    Show answer

    Answer: A. Smaller particles expose more surface to the acid, so the reaction is faster. The lumps and powder are the same substance in the same acid.

  4. 4. A catalyst is a substance that:

    1. Is used up in the reaction
    2. Always slows a reaction down
    3. Is a product of the reaction
    4. Increases the rate of a reaction without itself undergoing any chemical change
    Show answer

    Answer: D. Manganese dioxide, for example, speeds up the decomposition of potassium chlorate and hydrogen peroxide but remains chemically unchanged.

  5. 5. Which of these reactions is endothermic?

    1. CaO + H₂O → Ca(OH)₂ + Heat
    2. HCl + NaOH → NaCl + H₂O + Heat
    3. CaCO₃ + Heat → CaO + CO₂
    4. C + O₂ → CO₂ + Heat
    Show answer

    Answer: C. Heat appears on the reactant side in CaCO₃ + Heat → CaO + CO₂, so heat is absorbed. The other three release heat.

Privacy · Terms · Refunds · Delivery