- Practice
- About 15 min
- 5 practice questions
Nested, separate and four-figure arrangements
Build region lists for figures with shapes inside shapes, shapes that only touch, and four overlapping figures, and count how many regions they have.
If something looks wrong, please tell us.
Exam figures are not always three neatly overlapping shapes. A large rectangle may enclose everything, one shape may sit inside another, two shapes may touch without overlapping, or there may be four figures. The method does not change: codes for the dots, region lists for the answer figures. But the region lists take more care, and this lesson practises building them.
Four figures
With a rectangle R as a fourth figure, codes use up to four letters, such as RC or RCST. The three rules still apply. A very common design has a large rectangle enclosing the other figures. Then every code inside the picture contains R, and the region R alone (inside the rectangle, outside the rest) is added. If the circle, square and triangle overlap fully inside the rectangle, the regions are R, RC, RS, RT, RCS, RCT, RST and RCST: eight in all.
Touching is not overlapping
Two shapes that meet only at a point or along a shared edge have no common area, so no dot can be inside both. Treat them as separate. This is a favourite trap in answer figures: a square drawn touching a circle looks close to the overlap you need, but it has no CS region.
Counting regions
To count the regions of an arrangement, write its list and count it. Do not try to count by eye from a description. For example, if a circle and square overlap inside a rectangle and a triangle sits inside the rectangle overlapping the circle only, the list is R, RC, RS, RCS, RT, RCT: six regions. Each overlap adds regions; each 'inside' or 'separate' removes some.
Worked example 1: a rectangle around two figures
A large rectangle contains a circle and a square that overlap. A triangle lies partly inside the rectangle and partly outside it, and does not meet the circle or the square. Regions: R (rectangle only), RC, RS, RCS, RT (the part of the triangle inside the rectangle) and T (the part outside). Six regions in all. A dot with code T fits here because the triangle sticks out of the rectangle; it would not fit if the triangle were wholly inside.
Worked example 2: an inner figure and an outer one
A rectangle contains a circle. A square overlaps the circle and extends outside the rectangle. Which codes occur? The circle is inside the rectangle, so C alone and CS without R are impossible. The circle and square overlap inside the rectangle: RCS. The part of the circle away from the square: RC. The part of the square inside the rectangle but outside the circle: RS. The part of the square outside the rectangle: S. The rest of the rectangle: R. List: R, RC, RS, RCS, S.
Worked example 3: matching with four figures
Dots: RCT and S. Option (a): a rectangle encloses a circle, a square and a triangle that overlap fully. RCT exists, but the square is wholly inside the rectangle, so S without R is impossible. Option (b): the circle and triangle overlap inside the rectangle, and the square lies outside the rectangle, separate from everything. RCT exists and S exists. The answer is (b). The tidier-looking (a) fails on the simple-looking dot.
Write the region list; never count regions by eye. An enclosing figure adds its letter to every code inside it, touching figures are separate, and a figure that sticks out of another brings a code without the outer letter.
Key takeaways
Four figures and nested shapes need only the same three rules, applied patiently. An enclosing rectangle puts R in every code inside it and adds the region R alone. A shape that crosses the rectangle's edge creates codes both with and without R. Shapes that only touch share nothing. Write the list, then count or match.
Check your understanding
-
1. A large rectangle contains a circle and a square that overlap each other, and there is nothing else. How many regions are there inside the rectangle?
- 3
- 4
- 5
- 7
Show answer
Answer: B. Regions: R (rectangle only), RC (circle away from the square), RS (square away from the circle) and RCS (their overlap). That is 4.
-
2. A circle and a square touch at one point but do not overlap. Can a dot be inside both?
- Yes, at the point where they touch
- Yes, if the circle is larger
- No, they share no area, so no dot is inside both
- Only if a third figure covers the touching point
Show answer
Answer: C. Touching figures have no common area, so they count as separate. A dot drawn in a figure is inside an area, and no area belongs to both.
-
3. A circle, a square and a triangle overlap fully (all seven combinations appear), and a large rectangle encloses all three. How many regions are there inside the rectangle?
- 7
- 15
- 8
- 4
Show answer
Answer: C. Every one of the seven combinations now also carries R (RC, RS, RT, RCS, RCT, RST, RCST), and the part of the rectangle outside the other three adds the region R. 7 + 1 = 8.
-
4. A rectangle contains a circle. A square overlaps the circle and extends outside the rectangle. Which code is impossible?
- RC
- RCS
- S
- C
Show answer
Answer: D. The circle lies wholly inside the rectangle, so every dot in the circle has R in its code. C alone is impossible. RC, RCS and S (the part of the square outside the rectangle) all occur.
-
5. Which arrangement allows a dot inside all four figures: a rectangle, a circle, a square and a triangle?
- All four overlap in a common central part
- The rectangle encloses the other three, which are separate from one another
- The circle is inside the square, and the triangle and rectangle are separate
- The rectangle and triangle overlap, and the circle and square overlap elsewhere
Show answer
Answer: A. A dot inside all four needs a part common to all four figures. Only all four overlapping in a common central part has it. With the rectangle enclosing the other three, the circle, square and triangle never meet; in the other two some figures are separate.
Sign in to keep track of the lessons you finish.