• Foundation
  • 15 practice questions

Final self-assessment: Paper Cutting

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back at the lessons, then check your answers and read each explanation. The questions are a little harder than the checks after each lesson. Questions 1-3: lesson 1, "Cutting folded paper: the basic idea". Questions 4-6: lesson 2, "Cuts on the fold: making whole shapes from halves". Questions 7-9: lesson 3, "Two folds and the centre of the sheet". Questions 10-12: lesson 4, "Diagonal folds and counting pieces". Questions 13-15: lesson 5, "Paper cutting: mixed problems and exam method". Revisit a lesson for the questions you missed.

Final self-assessment

  1. 1. A sheet is folded once and three small circles are cut, all well away from the crease. How many holes does the opened sheet show?

    1. 3
    2. 4
    3. 9
    4. 6
    Show answer

    Answer: D. Each cut goes through 2 layers and stays clear of the crease, so each gives 2 separate holes: 3 x 2 = 6.

  2. 2. A sheet is folded twice (4 layers) and two small squares are cut, both away from the creases. How many square holes appear?

    1. 4
    2. 2
    3. 6
    4. 8
    Show answer

    Answer: D. Each cut goes through 4 layers: 2 x 4 = 8 separate squares.

  3. 3. A sheet is folded once along a vertical crease. A small arrow pointing towards the crease is cut away from the crease. What do you see on opening?

    1. Two arrows pointing the same way
    2. Two arrows pointing towards each other across the crease
    3. One arrow
    4. Two arrows pointing away from each other
    Show answer

    Answer: B. The copies are mirror images across the crease. An arrow pointing at the crease reflects to an arrow pointing back at the crease from the other side, so they point towards each other.

  4. 4. A sheet is folded once and a triangle with three unequal sides is cut with its base on the crease. What shape is the hole?

    1. A rhombus
    2. A square
    3. A kite
    4. An isosceles triangle
    Show answer

    Answer: C. The mirror copy repeats the two unequal sides on the other side of the base. Going round, the sides are a, b, b, a: two pairs of equal adjacent sides, which is a kite (a rhombus needs all four equal).

  5. 5. A once-folded sheet has a rectangle cut with its 4 cm side on the crease; it reaches 1.5 cm from the crease. What are the dimensions of the hole?

    1. 4 cm by 3 cm
    2. 4 cm by 1.5 cm
    3. 8 cm by 1.5 cm
    4. 8 cm by 3 cm
    Show answer

    Answer: A. The side on the crease stays 4 cm. The 1.5 cm reach is mirrored, giving 1.5 + 1.5 = 3 cm.

  6. 6. A sheet is folded once and a semicircle is cut with its curved side touching the crease at one point and its flat side away from the crease. What do you see?

    1. Two semicircles touching at one point, like a bow tie
    2. One full circle
    3. Two separate semicircles far apart
    4. One semicircle
    Show answer

    Answer: A. Only one point of the shape is on the crease, so the mirror copies meet at that point and do not join into a circle.

  7. 7. A square sheet is folded twice. A square of side 1.5 cm is cut at the centre corner with two sides on the creases. What is the hole?

    1. Four squares of side 1.5 cm
    2. One square of side 6 cm
    3. One square of side 3 cm at the centre
    4. A diamond of side 1.5 cm
    Show answer

    Answer: C. Four copies meet at the centre and join. Across each crease 1.5 cm is mirrored, so each side is 1.5 + 1.5 = 3 cm.

  8. 8. A square sheet is folded twice. A right-angled triangle is cut at the centre corner with its right angle there and legs of 2 cm and 3 cm along the two creases. What is the hole?

    1. A square of side 3 cm
    2. Four separate triangles
    3. A rectangle 4 cm by 6 cm
    4. A rhombus with diagonals 4 cm and 6 cm
    Show answer

    Answer: D. The four copies meet at the centre. The outline joins the points 2 cm left and right of the centre and 3 cm above and below it: a rhombus with diagonals 4 cm and 6 cm. It is not a square because the legs differ.

  9. 9. A square sheet is folded twice. One cut is a half-circle with its diameter on one crease, away from the centre corner; another is a small circle away from both creases. How many holes appear?

    1. 4
    2. 6
    3. 3
    4. 8
    Show answer

    Answer: B. The half-circle's 4 copies join in pairs across the crease: 2 circles. The small circle gives 4 separate circles. 2 + 4 = 6.

  10. 10. A sheet is folded in half along a vertical crease. Two cuts are made from the top edge to the bottom edge, parallel to the crease, at 1 cm and 3 cm from it. How many pieces does the opened sheet fall into?

    1. 3
    2. 4
    3. 5
    4. 6
    Show answer

    Answer: C. Each cut appears on both sides: cut lines at 1 cm and 3 cm either side of the crease, 4 lines in all. 4 edge-to-edge lines give 5 pieces.

  11. 11. A square sheet is folded along a diagonal and a half-circle is cut with its diameter on the diagonal. What is the hole?

    1. A full circle centred on the diagonal
    2. A half-circle
    3. Two half-circles touching at a point
    4. A rhombus
    Show answer

    Answer: A. The half-circle and its mirror image share the diameter on the crease, forming a full circle whose centre lies on the diagonal.

  12. 12. A sheet 20 cm wide is folded in half along a vertical crease. A cut is made from top to bottom, parallel to the crease and 3 cm from it. What are the widths of the pieces on opening?

    1. 10 cm and 10 cm
    2. 3 cm, 14 cm and 3 cm
    3. 7 cm and 13 cm
    4. 7 cm, 6 cm and 7 cm
    Show answer

    Answer: D. The crease is 10 cm from each side. Cut lines at 3 cm either side of it leave a middle piece 6 cm wide and two outer strips 10 - 3 = 7 cm wide.

  13. 13. A square sheet is folded twice. A quarter-circle is cut at the centre corner with its straight edges on the creases, and a small square is cut away from both creases. How many holes appear?

    1. 8
    2. 5
    3. 2
    4. 4
    Show answer

    Answer: B. The quarter-circle's four copies join into 1 circle at the centre. The square gives 4 separate squares. 1 + 4 = 5.

  14. 14. A once-folded sheet has a rectangle cut out with its 3 cm side on the crease; it reaches only 1 cm from the crease. What is the hole on opening?

    1. A square of side 3 cm
    2. A rectangle 3 cm by 2 cm
    3. A rectangle 6 cm by 1 cm
    4. A rectangle 3 cm by 1 cm
    Show answer

    Answer: B. The cut is 3 cm along the crease and 1 cm deep. Mirroring doubles the depth to 2 cm, so the hole is 3 cm by 2 cm with the crease through the middle.

  15. 15. A square sheet is folded twice and a single cut-out is made. Which number of holes is impossible?

    1. 1
    2. 2
    3. 4
    4. 3
    Show answer

    Answer: D. Four copies: they all join (cut at the centre corner) to give 1, join in pairs (touching one crease) to give 2, or stay separate to give 4. They cannot make 3.

Privacy · Terms · Refunds · Delivery