• Foundation
  • About 13 min
  • 5 practice questions

Change of state and latent heat

Explain melting, boiling and latent heat, and calculate heat needed for a change of state.

If something looks wrong, please tell us.

When ice melts, its temperature stays at 0 °C even though we keep heating it. Where does the heat go? It is used to change the state, not the temperature. This hidden heat is called latent heat.

Latent heat

Latent heat is the heat absorbed or released by a substance during a change of state at constant temperature. The heat goes into breaking or forming the bonds between molecules rather than raising their speed. The formula is Q = m L, where L is the specific latent heat in J/kg.

  • Latent heat of fusion (melting, ice to water at 0 °C): about 3.36 × 10⁵ J/kg for ice.
  • Latent heat of vaporisation (boiling, water to steam at 100 °C): about 2.26 × 10⁶ J/kg for water.
  • Steam at 100 °C burns more than boiling water at 100 °C, because steam carries the extra latent heat.

Cooling by evaporation

Evaporation takes latent heat from the liquid or the surface in contact, which cools it. That is why sweat cools the body and why an earthen pot keeps water cool.

Worked examples

Example 1. Heat to melt 0.5 kg of ice at 0 °C into water at 0 °C: Q = 0.5 × 3.36 × 10⁵ = 1.68 × 10⁵ J.

Example 2. Heat to turn 2 kg of water at 100 °C into steam at 100 °C: Q = 2 × 2.26 × 10⁶ = 4.52 × 10⁶ J.

Example 3. Total heat to convert 1 kg of ice at 0 °C into water at 20 °C. Step 1, melt: 3.36 × 10⁵ J. Step 2, warm: 1 × 4200 × 20 = 84 000 J. Total = 336 000 + 84 000 = 420 000 J.

Q = mL. During a change of state the temperature stays constant.

— Remember

Key takeaways

  • Latent heat changes the state without changing the temperature.
  • Q = mL.
  • Evaporation causes cooling.

Check your understanding

  1. 1. How much heat is needed to melt 0.25 kg of ice at 0 °C into water at 0 °C? (L = 3.36 × 10⁵ J/kg)

    1. 1.34 × 10⁶ J
    2. 3.36 × 10⁵ J
    3. 8.4 × 10⁴ J
    4. 8.4 × 10³ J
    Show answer

    Answer: C. Q = m L = 0.25 kg × 3.36 × 10⁵ J/kg = 84 000 J = 8.4 × 10⁴ J.

  2. 2. How much heat turns 0.5 kg of water at 100 °C into steam at 100 °C? (L = 2.26 × 10⁶ J/kg)

    1. 1.13 × 10⁶ J
    2. 4.52 × 10⁶ J
    3. 1.13 × 10⁵ J
    4. 2.26 × 10⁶ J
    Show answer

    Answer: A. Q = m L = 0.5 kg × 2.26 × 10⁶ J/kg = 1.13 × 10⁶ J.

  3. 3. Ice at 0 °C is heated steadily. What happens to its temperature while it is melting?

    1. It stays at 0 °C until all the ice has melted
    2. It rises steadily
    3. It falls below 0 °C
    4. It jumps straight to 100 °C
    Show answer

    Answer: A. During a change of state the heat supplied is latent heat; it changes the state, not the temperature.

  4. 4. Why does water kept in an earthen pot stay cool?

    1. Clay is naturally cold
    2. Clay reflects all the heat falling on it
    3. Water seeping through the pores evaporates and takes latent heat from the pot
    4. Clay releases ice into the water
    Show answer

    Answer: C. Evaporation takes latent heat from the surface it leaves, which cools the pot and the water inside.

  5. 5. Why does steam at 100 °C cause a worse burn than boiling water at 100 °C?

    1. Steam is at a higher temperature than 100 °C
    2. Steam gives out its latent heat of vaporisation as it condenses on the skin
    3. Boiling water has no heat in it
    4. Steam has a lower specific heat
    Show answer

    Answer: B. Both are at 100 °C, but steam first releases its large latent heat when it condenses, and then the water cools, so it delivers much more heat.

Sign in to keep track of the lessons you finish.

Next lesson → Heat transfer and thermal expansion

Privacy · Terms · Refunds · Delivery