- Foundation
- About 13 min
- 5 practice questions
Heat transfer and thermal expansion
Compare conduction, convection and radiation, and use the linear expansion formula.
If something looks wrong, please tell us.
A spoon in hot tea becomes hot, a room heater warms the whole room, and the Sun warms the Earth across empty space. These are three different ways in which heat travels.
Modes of heat transfer
| Mode | How it works | Medium needed? | Example |
|---|---|---|---|
| Conduction | Vibrating particles pass energy to neighbours | Yes, mainly solids | Hot spoon handle |
| Convection | Moving fluid carries heat | Yes, liquids and gases | Boiling water, sea breeze |
| Radiation | Electromagnetic waves | No | Heat from the Sun |
Metals are good conductors; wood, plastic and air are poor conductors (insulators). Dark rough surfaces absorb and emit radiation better than light shiny ones, which is why we wear light clothes in summer.
Thermal expansion
Most solids expand when heated. The increase in length is ΔL = α L ΔT, where α is the coefficient of linear expansion of the material. This is why gaps are left in railway tracks and bridges.
Worked examples
Example 1. A rod of length 2 m is heated by 50 °C. Take α = 1 × 10⁻⁵ per °C. ΔL = 1 × 10⁻⁵ × 2 × 50 = 1 × 10⁻³ m = 1 mm.
Example 2. Why is a pot's handle made of plastic or wood? These are poor conductors, so the handle does not become too hot to hold.
Example 3. Why is the heating element placed at the bottom of a water heater? The warm water rises by convection and sets up a circulating current that warms all the water.
Conduction in solids, convection in fluids, radiation needs no medium. ΔL = αLΔT.
Key takeaways
- Conduction needs contact, convection needs a flowing fluid, radiation needs neither.
- ΔL = αLΔT for linear expansion.
- Poor conductors are used as insulators.
Check your understanding
-
1. How does heat from the Sun reach the Earth?
- By conduction
- By convection
- By evaporation
- By radiation
Show answer
Answer: D. Space between the Sun and the Earth is nearly empty. Only radiation (electromagnetic waves) needs no medium.
-
2. A rod 5 m long has α = 1.2 × 10⁻⁵ per °C. By how much does it lengthen when heated by 30 °C?
- 0.18 mm
- 1.8 mm
- 18 mm
- 6 mm
Show answer
Answer: B. ΔL = α L ΔT = 1.2 × 10⁻⁵ × 5 m × 30 = 1.8 × 10⁻³ m = 1.8 mm.
-
3. Why is the heating element placed at the bottom of a water heater?
- Warm water rises and sets up convection currents that heat all the water
- Heat travels only downwards
- Water conducts heat better at the bottom
- Radiation cannot travel upwards
Show answer
Answer: A. Water heated at the bottom becomes lighter and rises; cooler water sinks to take its place, so a convection current warms the whole tank.
-
4. Which mode of heat transfer causes a sea breeze?
- Conduction
- Radiation
- Thermal expansion
- Convection
Show answer
Answer: D. Air over the warm land rises and cooler air from the sea moves in. Heat carried by a moving fluid is convection.
-
5. Which surface absorbs radiation best?
- A shiny white surface
- A polished silver surface
- A dull black surface
- A smooth light-coloured surface
Show answer
Answer: C. Dark, rough surfaces absorb (and emit) radiation better than light, shiny ones.
Sign in to keep track of the lessons you finish.