• Foundation
  • About 13 min
  • 5 practice questions

Keeping warm and keeping cool: insulation and the thermos flask

Apply conduction, convection and radiation to everyday things, and find how a thermos flask stops all three kinds of heat transfer.

If something looks wrong, please tell us.

Why do we wear woollen clothes in winter, put tea in a thermos flask, and paint roofs white in hot places? Each is an application of the three ways in which heat travels. In this lesson you will use conduction, convection and radiation to explain everyday things, and do simple calculations with made-up numbers.

The three ways, quickly

Conduction, convection and radiation
WayHow heat movesStopped by
ConductionThrough a solid, from particle to particleA poor conductor (insulator) such as wood, plastic or trapped air
ConvectionBy the movement of a liquid or gasStopping the fluid from moving, for example by trapping it in small pockets
RadiationAs invisible waves, even through a vacuumShiny surfaces which reflect the waves

Keeping warm

Wool, feathers and foam trap air in tiny spaces. Air is a very poor conductor, and in small pockets it cannot move around in convection currents, so heat escapes slowly. Several thin layers of clothing keep you warmer than one thick one, because each layer traps more air between them. Birds fluff up their feathers in the cold for the same reason.

Keeping cool

Dark surfaces absorb more radiation and white or shiny surfaces reflect more, so light-coloured clothes and roofs stay cooler in sunshine. Cooking pots have metal bottoms (good conductors) and plastic or wooden handles (poor conductors). A fan does not cool the air, but it speeds up evaporation of sweat from the skin, and evaporation takes heat from the body.

The thermos (vacuum) flask

A thermos flask keeps hot things hot and cold things cold. It has double glass walls with a vacuum between them. The vacuum stops conduction and convection, which both need particles. The glass surfaces facing the vacuum are silvered, so the walls reflect radiation back, which reduces losses by radiation. The stopper is made of cork or plastic, which are poor conductors, and it blocks the air above the liquid. Heat can still leak slowly through the stopper and the glass at the neck, and so the tea eventually cools.

Worked example 1: insulating a wall

The rate of heat flow through a slab is Q/t = kAΔT/d, where k is the conductivity, A the area, ΔT the temperature difference and d the thickness. Take a wall of area 10 m² and thickness 0.2 m, with a 10 K temperature difference between inside and outside. For a material with k = 0.5 W/m K (a made-up value), the loss is 0.5 × 10 × 10/0.2 = 250 W. If it is lined with a foam with k = 0.05 W/m K, the loss through the same thickness is 25 W, one tenth of the first.

Worked example 2: cooling of a cup of tea

A cup holds 0.2 kg of tea, which is treated as water. It cools from 80 °C to 60 °C. The heat lost is Q = mcΔT = 0.2 × 4200 × 20 = 16 800 J. If the cup loses heat at an average rate of 28 W, the time taken is 16 800 ÷ 28 = 600 s = 10 minutes. A lid and a thicker cup lower the rate of loss and make the tea stay hot for longer.

Worked example 3: choose the material

  • A saucepan base: a good conductor such as copper or aluminium, so food cooks quickly.
  • A saucepan handle: a poor conductor such as wood or plastic.
  • A winter jacket: wool or down, which trap air.
  • A foil blanket for a cold runner: a shiny surface, which reflects the body's radiation back.

Poor conductors and trapped air slow conduction and convection. Shiny surfaces reduce radiation. A thermos flask uses a vacuum and silvered walls.

— Rule to remember

Key takeaways

  • Trapped air is the secret of most insulators.
  • A vacuum stops conduction and convection, but not radiation, so the flask walls are silvered.
  • Light-coloured and shiny surfaces absorb less radiation.
  • Heat loss rate is proportional to the area and temperature difference, and inversely proportional to thickness.

Check your understanding

  1. 1. Wool keeps us warm in winter mainly because it:

    1. is a very good conductor of heat
    2. makes heat by itself when worn
    3. traps air, a poor conductor
    4. reflects all the radiation
    Show answer

    Answer: C. Wool traps air in tiny pockets. Air conducts poorly and cannot circulate there, so heat loss is slow.

  2. 2. The vacuum between the double walls of a thermos flask mainly prevents:

    1. conduction and convection
    2. radiation and evaporation
    3. reflection and refraction
    4. dissolving and melting
    Show answer

    Answer: A. Conduction and convection need particles, and a vacuum has none.

  3. 3. The inside surfaces of a thermos flask are silvered in order to:

    1. increase conduction through the glass
    2. reduce heat transfer by radiation
    3. make the glass stronger
    4. allow convection currents
    Show answer

    Answer: B. A shiny, silvered surface reflects radiation, so little heat is carried by radiation across the gap.

  4. 4. A wall has a heat loss of 120 W. Its thickness is doubled, with the same material, area and temperatures. The new rate of heat loss is:

    1. 60 W
    2. 120 W
    3. 240 W
    4. 30 W
    Show answer

    Answer: A. Q/t is inversely proportional to the thickness, so it is halved to 60 W.

  5. 5. Which colour of clothing is best for a hot, sunny day?

    1. Black cotton
    2. Dark blue cotton
    3. Dark brown cotton
    4. White or pale cotton
    Show answer

    Answer: D. Light colours reflect more of the Sun's radiation and absorb less, so they keep you cooler.

Privacy · Terms · Refunds · Delivery