Revision notes

Heat and Thermodynamics: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Heat, temperature and temperature scales

Fixed points of the scales
ScaleIce meltsWater boilsDivisions between
Celsius (°C)0100100
Fahrenheit (°F)32212180
Kelvin (K)273373100

F = (9/5)C + 32. K = C + 273. Heat is energy in transit; temperature measures hotness.

— Remember
  • Heat is energy (joule); temperature is a measure of hotness (kelvin, °C).
  • F = (9/5)C + 32; K = C + 273.
  • Heat flows from hot to cold.
Read the full lesson

Lesson 2

Specific heat and calorimetry

Q = mcΔT. Heat lost by the hot body = heat gained by the cold body. Water: c = 4200 J/(kg °C).

— Remember
  • Q = mcΔT.
  • Water has a high specific heat of 4200 J/(kg °C).
  • Heat lost = heat gained in an insulated mixture.
Read the full lesson

Lesson 3

Change of state and latent heat

Q = mL. During a change of state the temperature stays constant.

— Remember
  • Latent heat changes the state without changing the temperature.
  • Q = mL.
  • Evaporation causes cooling.
Read the full lesson

Lesson 4

Heat transfer and thermal expansion

The three modes
ModeHow it worksMedium needed?Example
ConductionVibrating particles pass energy to neighboursYes, mainly solidsHot spoon handle
ConvectionMoving fluid carries heatYes, liquids and gasesBoiling water, sea breeze
RadiationElectromagnetic wavesNoHeat from the Sun

Conduction in solids, convection in fluids, radiation needs no medium. ΔL = αLΔT.

— Remember
  • Conduction needs contact, convection needs a flowing fluid, radiation needs neither.
  • ΔL = αLΔT for linear expansion.
  • Poor conductors are used as insulators.
Read the full lesson

Lesson 5

Laws of thermodynamics and heat engines

First law: Q = ΔU + W. Efficiency = work out ÷ heat in. No engine is 100% efficient.

— Remember
  • The first law is energy conservation: Q = ΔU + W.
  • Efficiency = W ÷ Q₁, always below 100%.
  • Heat does not flow by itself from cold to hot.
Read the full lesson

Lesson 6

The gas laws: Boyle, Charles and Gay-Lussac in simple steps

Gas laws for a fixed amount of gas
LawWhat stays fixedRelationIn words
Boyle's lawTemperatureP × V = constantSqueeze the gas to half the volume and the pressure doubles
Charles's lawPressureV / T = constantVolume grows in proportion to the kelvin temperature
Gay-Lussac's lawVolumeP / T = constantIn a rigid container, pressure grows in proportion to the kelvin temperature

Always change °C to kelvin first. Boyle: PV constant. Charles: V/T constant. Gay-Lussac: P/T constant. Combined: P₁V₁/T₁ = P₂V₂/T₂.

— Rule to remember
  • Gas laws describe a fixed amount of gas.
  • Temperature must be in kelvin: add 273 to the Celsius value.
  • Pick the law that fits the quantity which stays the same, or use the combined law.
Read the full lesson

Lesson 7

Heat as energy: internal energy and the mechanical equivalent of heat

Units of heat
UnitMeaningConversion
Calorie (cal)Heat to raise 1 g of water by 1 °C1 cal = 4.2 J
Kilocalorie (kcal)1000 calories, used for food energy1 kcal = 4200 J
Joule (J)The SI unit of energy1 J = 0.24 cal

Heat is energy in transit because of a temperature difference. 1 cal = 4.2 J. 1 kcal = 4200 J. Work can always be changed into heat.

— Rule to remember
  • Internal energy is the total of the energy of the particles of a body.
  • Heat is energy that flows because of a temperature difference.
  • 1 calorie is about 4.2 joules, and 1 kilocalorie is 4200 J.
  • Work done against friction ends up as heat.
Read the full lesson

Lesson 8

Water's special behaviour: anomalous expansion and high specific heat

Water is densest at 4 °C. Ice is lighter than water and floats. Water has a high specific heat, so it warms and cools slowly.

— Rule to remember
  • Water contracts on heating from 0 °C to 4 °C, so its density is a maximum at 4 °C.
  • The bottom of a frozen lake stays near 4 °C, which protects life.
  • Ice floats with about nine-tenths of its volume below the surface.
  • High specific heat of water gives sea breezes and a mild coastal climate.
Read the full lesson

Lesson 9

Keeping warm and keeping cool: insulation and the thermos flask

Conduction, convection and radiation
WayHow heat movesStopped by
ConductionThrough a solid, from particle to particleA poor conductor (insulator) such as wood, plastic or trapped air
ConvectionBy the movement of a liquid or gasStopping the fluid from moving, for example by trapping it in small pockets
RadiationAs invisible waves, even through a vacuumShiny surfaces which reflect the waves

Poor conductors and trapped air slow conduction and convection. Shiny surfaces reduce radiation. A thermos flask uses a vacuum and silvered walls.

— Rule to remember
  • Trapped air is the secret of most insulators.
  • A vacuum stops conduction and convection, but not radiation, so the flask walls are silvered.
  • Light-coloured and shiny surfaces absorb less radiation.
  • Heat loss rate is proportional to the area and temperature difference, and inversely proportional to thickness.
Read the full lesson

Privacy · Terms · Refunds · Delivery