• Foundation
  • About 14 min
  • 5 practice questions

Electricity at home: bills, fuses and safety

Calculate an electricity bill, choose a fuse rating and follow safe practices for household electricity.

If something looks wrong, please tell us.

Every month an electricity bill reaches your home. Understanding how it is calculated lets you save money, and understanding fuses and earthing helps you stay safe.

Reading the bill

The bill is based on the units (kilowatt-hours) consumed. Energy in kWh = power in kW × time in hours. Cost = units × rate per unit. Household circuits are parallel, with the live, neutral and earth wires.

Fuses and ratings

An appliance of power P at voltage V draws I = P ÷ V. The fuse in its circuit must be rated a little above this current: it should not melt in normal use but must melt if there is an overload. Earthing connects the metal body to the ground so that a leakage current does not pass through a person.

Worked examples

Example 1. A 1.5 kW air conditioner runs 8 hours a day. Daily energy = 1.5 × 8 = 12 kWh. For 30 days: 360 kWh.

Example 2. If the rate is Rs 6 per unit (an assumed rate for practice), cost for 360 kWh = 360 × 6 = Rs 2160.

Example 3. A 2 kW heater on a 220 V supply draws 2000 ÷ 220 ≈ 9.1 A. A 10 A fuse is a suitable rating; a 5 A fuse would melt at once, and a 30 A fuse would not protect the wires.

Example 4. Replacing a 60 W bulb with a 9 W LED bulb that gives similar light, used 5 hours a day for 30 days. Old energy = 0.06 × 150 = 9 kWh. New energy = 0.009 × 150 = 1.35 kWh. Saving = 9 − 1.35 = 7.65 kWh.

Safety rules

  • Never touch switches with wet hands.
  • Switch off the main supply before repairs.
  • Use the correct rating of fuse or MCB.
  • Do not overload a socket with many appliances.
  • Always use three-pin plugs with an earth connection for metal-bodied appliances.

kWh = kW × hours. Current = P ÷ V. Fuse rating just above the working current.

— Remember

Key takeaways

  • Bill = units (kWh) × rate.
  • Choose a fuse slightly above the working current.
  • Earthing and correct wiring prevent shocks and fires.

Check your understanding

  1. 1. A 2 kW heater is used for 3 hours a day. How many units (kWh) does it use in 30 days?

    1. 60 units
    2. 6 units
    3. 1800 units
    4. 180 units
    Show answer

    Answer: D. Daily energy = 2 kW × 3 h = 6 kWh. In 30 days = 6 × 30 = 180 kWh, that is 180 units.

  2. 2. A 500 W pump runs 4 hours a day for 30 days. At an assumed rate of Rs 6 per unit, what does it cost?

    1. Rs 60
    2. Rs 360
    3. Rs 3600
    4. Rs 120
    Show answer

    Answer: B. Energy = 0.5 kW × 4 h × 30 = 60 kWh = 60 units. Cost = 60 × 6 = Rs 360.

  3. 3. An 880 W appliance works on a 220 V supply. Which fuse is most suitable for it?

    1. 1 A
    2. 15 A
    3. 5 A
    4. 30 A
    Show answer

    Answer: C. Working current I = P ÷ V = 880 ÷ 220 = 4 A. The fuse should be a little above this: 5 A. A 1 A fuse would melt in normal use; 15 A or 30 A would not protect against an overload.

  4. 4. What is the purpose of the earth wire connected to the metal body of an appliance?

    1. It carries any leakage current safely to the ground
    2. It raises the supply voltage
    3. It carries the working current to the appliance in normal use
    4. It reduces the electricity bill
    Show answer

    Answer: A. Earthing connects the metal body to the ground, so if the body becomes live, the leakage current goes to earth and not through a person touching it.

  5. 5. How are the appliances in a household circuit connected?

    1. In series
    2. Through the earth wire only
    3. One after another on a single loop
    4. In parallel
    Show answer

    Answer: D. Household circuits are parallel, so each appliance gets the full supply voltage and can be switched on or off on its own.

Sign in to keep track of the lessons you finish.

Next lesson → Light and sound in everyday life

Privacy · Terms · Refunds · Delivery