• Foundation
  • About 13 min
  • 5 practice questions

Magnets and electromagnets around the home

Describe magnetic poles and materials, how a compass works, how an electromagnet is made stronger, and how an electric bell rings.

If something looks wrong, please tell us.

Magnets are hidden in many things you use every day: the door of a refrigerator, a loudspeaker, a compass, a school bell. This lesson explains a few simple rules about magnets and shows how they are put to work, including the electromagnet, a magnet that can be switched on and off.

Poles and materials

  • Every magnet has two poles, a north pole and a south pole. The field is strongest at the poles.
  • Like poles repel and unlike poles attract.
  • A magnet attracts magnetic materials: iron, steel, nickel and cobalt. It does not attract copper, aluminium, wood, plastic or glass.
  • If a bar magnet is cut in two, each piece is a complete magnet with its own north and south poles. A single isolated pole has never been found.
  • A freely suspended magnet or a compass needle comes to rest pointing roughly north-south, because the Earth itself behaves like a huge bar magnet. The end of the needle that points north is called its north-seeking pole.

Electromagnets

When an electric current flows through a coil of wire wound around a soft iron core, the coil becomes a magnet. This is an electromagnet. It can be switched on and off, and its strength can be changed. It becomes stronger if you use more turns of wire, a larger current, or a soft iron core inside the coil. Soft iron loses its magnetism when the current stops, so the electromagnet drops its load. Electromagnets are used in cranes that lift scrap iron, electric bells, loudspeakers, relays and motors.

The electric bell

  1. Pressing the switch completes the circuit, and current flows through the coils of the electromagnet.
  2. The electromagnet attracts a soft iron armature, which carries a hammer. The hammer strikes the gong.
  3. As the armature moves, it breaks contact at the contact screw, so the current stops.
  4. The electromagnet loses its magnetism, and a spring pulls the armature back, which reconnects the circuit.
  5. The process repeats quickly as long as the switch is pressed, so the hammer strikes the gong again and again.

Worked examples

Example 1 (which are attracted?). A magnet is brought near an iron nail, a copper coin, a steel spoon and a piece of aluminium foil. Step 1: identify the magnetic materials: iron and steel (steel is mostly iron). Step 2: the nail and the spoon are attracted. The copper coin and the aluminium foil are not, since copper and aluminium are non-magnetic.

Example 2 (breaking a magnet). A bar magnet with poles N and S is cut into two equal halves. Each half has its own N and S poles, the two ends that were at the cut becoming a new south pole on one piece and a new north pole on the other. So there are now two weaker magnets, not one N piece and one S piece.

Example 3 (improving a crane magnet). A scrap-yard electromagnet is too weak to lift a car body. To strengthen it: increase the number of turns of wire, pass a larger current, and keep the soft iron core. To drop the load at the right place, simply switch the current off. A permanent magnet could not be switched off in this way.

Example 4 (compass). A compass is placed near the north pole of a bar magnet. The north-seeking end of the needle is also a north pole, and like poles repel, so it turns away from the bar magnet's north pole and points the other way. This shows how a compass can be used to find the poles of a magnet.

Like poles repel, unlike attract. Only iron, steel, nickel and cobalt are attracted. An electromagnet is stronger with more turns, more current and a soft iron core, and can be switched off.

— Rule to remember

Key takeaways

  • A magnet has two poles; like poles repel and unlike poles attract.
  • Cutting a magnet always makes two magnets.
  • An electromagnet is a coil with a soft iron core that works only while current flows.
  • The electric bell uses an electromagnet that switches itself on and off.

Check your understanding

  1. 1. Which of these objects is attracted to a magnet?

    1. A copper wire
    2. An aluminium tray
    3. A steel spoon
    4. A glass tumbler
    Show answer

    Answer: C. Steel contains iron and is attracted. Copper, aluminium and glass are non-magnetic.

  2. 2. Two magnets are brought close with their north poles facing each other. They will:

    1. Repel each other
    2. Attract each other
    3. Not interact at all
    4. Become demagnetised
    Show answer

    Answer: A. Like poles repel.

  3. 3. An advantage of an electromagnet over a permanent magnet is that it:

    1. Never needs a battery
    2. Can be switched on and off
    3. Is always weaker
    4. Can attract wood
    Show answer

    Answer: B. Its magnetism exists only while current flows, so it can be switched on and off, and its strength can be changed.

  4. 4. A bar magnet is cut into two pieces. Then:

    1. One piece has only a north pole and the other only a south pole
    2. Both pieces lose their magnetism
    3. Each piece is a magnet with a north pole and a south pole
    4. The pieces repel each other forever
    Show answer

    Answer: C. Each piece becomes a complete magnet with its own pair of poles.

  5. 5. In an electric bell, the hammer strikes the gong because:

    1. The gong itself is a strong magnet that pulls it
    2. A spring is pulled down by gravity and strikes it
    3. The battery pushes the hammer through the wire
    4. The coil attracts the iron armature on the hammer
    Show answer

    Answer: D. When current flows, the electromagnet attracts the iron armature carrying the hammer, which hits the gong.

Privacy · Terms · Refunds · Delivery