- Practice
- About 16 min
- 5 practice questions
Electricity at home
Read power ratings, calculate electricity bills and fuse ratings, and explain why household appliances are wired in parallel.
If something looks wrong, please tell us.
Every switch, bulb and fan in your home follows Ohm's law and the power formula. Calculating a monthly bill and choosing a safe fuse are practical applications that frequently appear in exams.
Household circuits
- Appliances are connected in parallel so each gets the full mains voltage and works independently.
- A fuse or MCB is connected in series with the live wire; it cuts the circuit if the current becomes too large (short circuit or overload).
- Earthing: the metal body of an appliance is connected to the ground, so any leakage current flows to the earth rather than through a person.
- Energy consumed = power (kW) × time (h) in kWh, or units.
- Efficiency: an LED bulb gives the same light as an incandescent bulb of much higher wattage, using less energy.
Worked examples
Example 1. Five fans of 75 W run for 8 hours a day for 30 days. Power = 5 × 75 = 375 W = 0.375 kW. Energy = 0.375 × 8 × 30 = 90 units. At ₹6 per unit, the cost is ₹540.
Example 2. A 9 W LED replaces a 60 W incandescent bulb used 5 hours a day for 30 days. Saving = (60 − 9) W = 0.051 kW; 0.051 × 5 × 30 = 7.65 units. At ₹6 per unit, this saves ₹45.90 per month.
Example 3. An electric iron is rated 1500 W, 220 V. I = 1500/220 = 6.8 A, so a 10 A fuse is suitable (a 5 A fuse would blow).
Example 4. A toaster of 1100 W is used for 6 minutes. Energy = 1.1 kW × 0.1 h = 0.11 kWh = 0.11 units.
Units = kW × hours. I = P/V. Fuse rating must be just above the normal working current. Appliances are in parallel; the fuse is in series with the live wire.
Key takeaways
- Bills depend on power rating and hours of use.
- Fuse rating must exceed normal current but stay low enough to protect the wiring.
- Never touch a live wire with wet hands; water conducts.
Check your understanding
-
1. How is a fuse connected in a household circuit?
- In parallel with the appliance
- In the earth wire
- In series with the neutral wire
- In series with the live wire
Show answer
Answer: D. The fuse (or MCB) is placed in series with the live wire, so when it melts it cuts off the live supply to the circuit.
-
2. Three 50 W fans run 10 hours a day for 30 days. At an assumed ₹7 per unit, what is the cost?
- ₹45
- ₹315
- ₹105
- ₹3150
Show answer
Answer: B. Power = 3 × 50 = 150 W = 0.15 kW. Energy = 0.15 × 10 × 30 = 45 units. Cost = 45 × 7 = ₹315.
-
3. What current does a 1320 W appliance draw from a 220 V supply?
- 0.6 A
- 16 A
- 6 A
- 60 A
Show answer
Answer: C. I = P ÷ V = 1320 ÷ 220 = 6 A.
-
4. A 1200 W toaster is used for 15 minutes. How much energy does it use?
- 0.3 kWh
- 18 kWh
- 3 kWh
- 0.18 kWh
Show answer
Answer: A. 15 minutes = 0.25 h. Energy = 1.2 kW × 0.25 h = 0.3 kWh, that is 0.3 units.
-
5. Why are household appliances connected in parallel?
- To make all appliances switch off together
- To make the current through each the same
- To increase the total resistance of the circuit
- Each gets the full mains voltage and can be switched on or off independently
Show answer
Answer: D. In parallel each appliance has the full supply voltage across it and its own switch; in series they would share the voltage and all go off together.
Sign in to keep track of the lessons you finish.