• Practice
  • About 15 min
  • 5 practice questions

Running costs and energy-saving comparisons

Compare the energy used by different lamps and appliances, find savings and payback times, and spot standby waste.

If something looks wrong, please tell us.

Choosing a lamp, a fan or a geyser is partly a physics problem. The same amount of light or heat can cost very different amounts of electricity. Exam questions on this topic ask you to compare two appliances, work out a saving, or find how long an expensive but efficient appliance takes to pay for itself. All the rupee figures below, including the rate per unit, are illustrative and not real tariffs.

Method

  1. Energy in kWh = power in kW × time in hours. Convert watts to kilowatts by dividing by 1000.
  2. For two appliances doing the same job, work out each energy figure separately, then subtract to get the saving.
  3. Cost = energy in kWh × rate per unit. A 'unit' of electricity means one kilowatt-hour.
  4. Payback time = extra purchase price ÷ saving per month (or per year).
  5. Efficiency = useful energy output ÷ energy input. A lamp turns only some of its input into light; the rest becomes heat.

Worked examples

Example 1 (lamp comparison). A 60 W filament lamp and a 9 W LED lamp give the same amount of light. Both burn for 5 hours a day for 30 days, i.e. 150 hours. Filament: 0.060 kW × 150 h = 9 kWh. LED: 0.009 kW × 150 h = 1.35 kWh. Saving = 9 − 1.35 = 7.65 kWh. At an illustrative ₹6 per unit, the saving is 7.65 × 6 = ₹45.90 per month.

Example 2 (payback). Suppose the LED lamp costs ₹100 more than the filament lamp (an illustrative figure). Payback time = ₹100 ÷ ₹45.90 per month ≈ 2.2 months. After that, the LED lamp is money saved each month. The LED lasts far longer as well, but that is a separate point.

Example 3 (standby waste). A television draws 5 W in standby and is left on standby for 20 hours a day for 30 days. Energy = 0.005 kW × 600 h = 3 kWh, which costs 3 × 6 = ₹18 at the illustrative rate for no useful purpose. Switching it off at the plug removes this loss.

Example 4 (geyser). A 2 kW geyser runs for 15 minutes (0.25 h) every day for 30 days. Energy = 2 × 0.25 × 30 = 15 kWh. At ₹6 per unit the cost is ₹90. Heating the same water through the same rise always needs the same useful heat; a better-insulated geyser saves energy only by wasting less of it.

Example 5 (efficiency). A lamp takes 10 W and gives 2 W as light. Efficiency = 2 ÷ 10 = 0.2 = 20%. The other 8 W appears as heat. A more efficient lamp giving the same 2 W of light with 4 W input has an efficiency of 50% and uses less than half of the energy.

Traps

  • Forgetting to convert watts to kilowatts, which gives answers 1000 times too large.
  • Using minutes as hours. 15 minutes is 0.25 h, not 15 h.
  • Comparing appliances over different times, or comparing power ratings when they do not do the same job.
  • Treating 'unit' as 1 kW or 1 hour. A unit is 1 kilowatt-hour, i.e. 3.6 × 10⁶ J.

Energy (kWh) = power (kW) × time (h). Cost = kWh × rate. Payback = extra cost ÷ saving. Efficiency = useful output ÷ input.

— Rule to remember

Key takeaways

  • Compare appliances by energy for the same job, not by power rating alone.
  • Standby loads waste energy over long periods.
  • A higher purchase price can be recovered through savings; calculate the payback time.

Check your understanding

  1. 1. A 40 W fan runs for 10 hours. The energy used is:

    1. 400 kWh
    2. 4 kWh
    3. 0.4 kWh
    4. 0.04 kWh
    Show answer

    Answer: C. 40 W = 0.04 kW. Energy = 0.04 × 10 = 0.4 kWh.

  2. 2. A 60 W lamp and a 9 W LED are each used for 100 hours. The LED saves:

    1. 5.1 kWh
    2. 51 kWh
    3. 6.9 kWh
    4. 0.51 kWh
    Show answer

    Answer: A. Difference in power = 51 W = 0.051 kW. Saving = 0.051 × 100 = 5.1 kWh.

  3. 3. A 2 kW heater runs 15 minutes a day for 30 days. At an illustrative ₹5 per unit the cost is:

    1. ₹50
    2. ₹150
    3. ₹75
    4. ₹7.50
    Show answer

    Answer: C. Energy = 2 × 0.25 × 30 = 15 kWh. Cost = 15 × 5 = ₹75.

  4. 4. An appliance draws 4 W on standby all the time (24 h a day) for 30 days. The energy wasted is:

    1. 2.88 kWh
    2. 0.12 kWh
    3. 28.8 kWh
    4. 2880 kWh
    Show answer

    Answer: A. 4 W = 0.004 kW. Hours = 24 × 30 = 720. Energy = 0.004 × 720 = 2.88 kWh.

  5. 5. A lamp takes 10 W and gives out 2 W of light. Its efficiency is:

    1. 80%
    2. 50%
    3. 5%
    4. 20%
    Show answer

    Answer: D. Efficiency = useful output ÷ input = 2 ÷ 10 = 0.2 = 20%.

Privacy · Terms · Refunds · Delivery