Revision notes

Physics in Daily Life: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Motion, force and pressure around us

Stopping distance = v²/2μg. Pressure = force/area. Force = change in momentum / time: longer stopping time means smaller force.

— Remember
  • Safety devices work by increasing stopping time or contact area.
  • Braking distance grows with the square of the speed.
  • Link each everyday observation to one law: inertia, momentum or pressure.
Read the full lesson

Lesson 2

Heat in the home

Q = mcΔT. Higher pressure raises the boiling point. Evaporation causes cooling. Trapped air is a good insulator.

— Remember
  • Match each household device to conduction, convection, radiation or evaporation.
  • Use Q = mcΔT and P × t for heating time and cost.
  • Insulators work by trapping air or a vacuum.
Read the full lesson

Lesson 3

Electricity at home

Units = kW × hours. I = P/V. Fuse rating must be just above the normal working current. Appliances are in parallel; the fuse is in series with the live wire.

— Remember
  • Bills depend on power rating and hours of use.
  • Fuse rating must exceed normal current but stay low enough to protect the wiring.
  • Never touch a live wire with wet hands; water conducts.
Read the full lesson

Lesson 4

Light and sound in everyday life

P = 1/f. Convex mirror: always virtual, upright, smaller. Distance to lightning = 340 × time. Approaching sources raise the pitch.

— Remember
  • Choose the mirror or lens by the image you need.
  • Light is almost instantaneous compared with sound over everyday distances.
  • Apply the formulae with the correct signs.
Read the full lesson

Lesson 5

Energy and technology

Wind power = ½ρAv³ (cubic in speed). Solar output = efficiency × area × intensity. Hydro power = efficiency × ṁ g h. Energy is never created or destroyed, only converted.

— Remember
  • Efficiency tells you how much of the input energy becomes useful output.
  • Wind power depends on the cube of wind speed.
  • Every device converts energy from one form to another.
Read the full lesson

Lesson 6

Running costs and energy-saving comparisons

Energy (kWh) = power (kW) × time (h). Cost = kWh × rate. Payback = extra cost ÷ saving. Efficiency = useful output ÷ input.

— Rule to remember
  • Compare appliances by energy for the same job, not by power rating alone.
  • Standby loads waste energy over long periods.
  • A higher purchase price can be recovered through savings; calculate the payback time.
Read the full lesson

Lesson 7

Echo, thunder and sonar: distance problems with sound

Echo/sonar: d = vt ÷ 2. Thunder: d = vt. Minimum distance for a separate echo ≈ 17 m. Sound is faster in liquids than in air.

— Rule to remember
  • Decide first whether the sound makes a round trip or a one-way trip.
  • Light reaches us almost instantly compared with sound.
  • Ultrasonic sonar uses the same arithmetic as an echo.
Read the full lesson

Lesson 8

Mirror and lens problems: rear-view mirrors, shaving mirrors and spectacles

Mirror: 1 ÷ v + 1 ÷ u = 1 ÷ f, m = −v ÷ u. Lens power P = 1 ÷ f in metres. Short sight: concave lens; long sight: convex lens.

— Rule to remember
  • The signs tell you whether the image is real or virtual and upright or inverted.
  • A convex mirror always gives a small virtual image with a wide field of view.
  • The power of a spectacle lens follows from the far or near point of the eye.
Read the full lesson

Lesson 9

Levers, ramps and power: problems on simple machines

Effort × effort arm = load × load arm. Ramp: effort = load × height ÷ length. Power = work ÷ time. Efficiency = useful work ÷ input.

— Rule to remember
  • Balance the moments about the pivot.
  • A long ramp or a long handle reduces the force needed, but not the work.
  • Use efficiency to account for friction.
Read the full lesson

Privacy · Terms · Refunds · Delivery