• Practice
  • About 14 min
  • 5 practice questions

Reflection, beats and energy of waves

Describe reflection at fixed and free ends, calculate beat frequency and use the inverse-square law for intensity.

If something looks wrong, please tell us.

This lesson rounds off the topic with three things exams love: how a pulse reflects, what beats are, and how wave intensity falls with distance.

Reflection of a pulse

  • At a fixed end, the reflected pulse is inverted (phase change of π).
  • At a free end, the reflected pulse is not inverted (no phase change).
  • When a wave moves from a rarer to a denser medium, part is reflected and part is transmitted; the frequency stays the same.

Beats

Two waves of nearly equal frequencies f₁ and f₂ produce a regular rise and fall of loudness. The number of beats per second equals the difference: f_beat = |f₁ − f₂|.

Intensity

The intensity from a point source spreading in all directions is I = P/(4πr²), so I is proportional to 1/r². Intensity is also proportional to (amplitude)² and to (frequency)².

Worked examples

Example 1. Two tuning forks of 256 Hz and 260 Hz sounded together give 260 − 256 = 4 beats per second.

Example 2. An unknown fork X gives 4 beats per second with a 256 Hz fork. After loading X with wax (which lowers its frequency) the beats fall to 2 per second. Before loading, f_X was either 252 or 260. Lowering a frequency of 260 Hz towards 258 reduces the beats to 2 (258 − 256 = 2), whereas lowering 252 would move it away from 256 and increase the beats. So f_X = 260 Hz.

Example 3. At a distance of 2 m from a point source the intensity is 8 W/m². At 4 m, the distance is doubled, so I = 8/4 = 2 W/m².

Example 4. A source radiates 100 W uniformly. At 5 m, I = 100/(4π × 25) = 100/314 = 0.32 W/m².

Beat frequency = |f₁ − f₂|. A fixed-end reflection inverts the pulse. Intensity from a point source falls as 1/r².

— Remember

Key takeaways

  • Beat frequency is the difference of the two frequencies.
  • Waiting for a change in beats after loading or filing a fork tells you which fork is higher.
  • Intensity follows the inverse-square law from a point source.

Check your understanding

  1. 1. A pulse travels along a string and reflects from an end that is fixed to a wall. The reflected pulse is:

    1. Upright, with no change
    2. Inverted
    3. Absorbed completely, so there is no reflection
    4. Upright but with double the amplitude
    Show answer

    Answer: B. At a fixed end the reflected pulse is inverted (a phase change of π). At a free end it returns upright.

  2. 2. Tuning forks of 384 Hz and 380 Hz are sounded together. How many beats are heard in 6 s?

    1. 24
    2. 4
    3. About 0.67
    4. 764
    Show answer

    Answer: A. Beat frequency = 384 − 380 = 4 per second. In 6 s: 4 × 6 = 24 beats.

  3. 3. A fork X gives 5 beats per second with a 300 Hz fork. When X is loaded with a little wax, the beats increase to 7 per second. What was the frequency of X before loading?

    1. 305 Hz
    2. 300 Hz
    3. 293 Hz
    4. 295 Hz
    Show answer

    Answer: D. Before loading X was 295 or 305 Hz. Wax lowers X's frequency. From 305 Hz it would move towards 300 Hz and the beats would fall; from 295 Hz it moves to 293 Hz, giving 7 beats. So X was 295 Hz.

  4. 4. The intensity at a distance d from a point source is I. What is the intensity at a distance 4d?

    1. I/4
    2. 4I
    3. I/16
    4. I/8
    Show answer

    Answer: C. For a point source I is proportional to 1/r². Four times the distance gives 1/4² = 1/16 of the intensity.

  5. 5. The amplitude of a wave is made 3 times as large, with the frequency unchanged. What happens to its intensity?

    1. It becomes 9 times as large
    2. It becomes 3 times as large
    3. It becomes 6 times as large
    4. It does not change
    Show answer

    Answer: A. Intensity is proportional to amplitude squared: 3² = 9.

Privacy · Terms · Refunds · Delivery