- Practice
- About 15 min
- 5 practice questions
Waves on a string and superposition
Find the speed of a transverse wave on a string with v = √(T/μ) and apply interference and intensity ratios.
If something looks wrong, please tell us.
When two waves meet, the displacements simply add. This principle of superposition leads to interference, standing waves and beats. First we need the speed of a wave on a stretched string.
Speed on a string
The speed of a transverse wave on a string with tension T and mass per unit length μ (linear density) is v = √(T/μ). A tighter or lighter string carries waves faster. This does not depend on the frequency of the wave.
Superposition and interference
- Constructive interference: waves in phase (path difference = nλ), amplitudes add: A = A₁ + A₂.
- Destructive interference: waves in opposite phase (path difference = (n + ½)λ), A = |A₁ − A₂|.
- Intensity is proportional to the square of the amplitude.
- I_max/I_min = ((A₁ + A₂)/(A₁ − A₂))².
Worked examples
Example 1. A string under tension 100 N has linear density 0.01 kg/m. v = √(100/0.01) = √10 000 = 100 m/s.
Example 2. If the tension is quadrupled, the speed doubles to 200 m/s, because v is proportional to √T.
Example 3. Two waves of amplitudes 3 cm and 1 cm interfere. Maximum amplitude = 4 cm; minimum = 2 cm; I_max/I_min = (4/2)² = 4.
Example 4. Two identical sources produce waves of wavelength 2 m. A point is 5 m from one source and 7 m from the other. Path difference = 2 m = 1λ, so there is constructive interference. If the distances were 5 m and 6 m, the path difference would be 1 m = λ/2, giving destructive interference.
v = √(T/μ). Constructive: path difference = nλ. Destructive: (n + ½)λ. I is proportional to A².
Key takeaways
- Speed on a string depends on tension and linear density only.
- Superposition: displacements add at every point.
- Compare intensities by squaring amplitudes.
Check your understanding
-
1. A string under a tension of 90 N has a linear density of 0.1 kg/m. What is the speed of a transverse wave on it?
- 900 m/s
- 9 m/s
- 3 m/s
- 30 m/s
Show answer
Answer: D. v = √(T ÷ μ) = √(90 ÷ 0.1) = √900 = 30 m/s.
-
2. The tension in a stretched string is made 4 times as large. What happens to the wave speed?
- It becomes 4 times
- It doubles
- It halves
- It does not change
Show answer
Answer: B. v = √(T ÷ μ), so v is proportional to √T. Four times the tension gives √4 = 2 times the speed.
-
3. Two waves of amplitudes 5 cm and 3 cm interfere. What is the ratio of maximum to minimum intensity?
- 4 : 1
- 64 : 1
- 16 : 1
- 5 : 3
Show answer
Answer: C. A_max = 5 + 3 = 8 cm, A_min = 5 − 3 = 2 cm. Intensity is proportional to amplitude squared: (8 ÷ 2)² = 16.
-
4. Two identical in-phase sources produce waves of wavelength 4 m. A point is 10 m from one source and 16 m from the other. What happens there?
- Destructive interference, since the path difference is 1.5λ
- Constructive interference, since the path difference is 1.5λ
- Constructive interference, since the path difference is 2λ
- Destructive interference, since the path difference is 2λ
Show answer
Answer: A. Path difference = 16 − 10 = 6 m = 6 ÷ 4 = 1.5λ, which is (n + ½)λ, so the interference is destructive.
-
5. On the same stretched string, the frequency of the wave is doubled. What happens to the wave speed?
- It doubles, and the wavelength stays the same
- It halves, and the wavelength stays the same
- It doubles, and the wavelength doubles
- It stays the same, and the wavelength halves
Show answer
Answer: D. The speed on a string depends only on tension and linear density, v = √(T ÷ μ), not on frequency. With v fixed, doubling f halves λ.
Sign in to keep track of the lessons you finish.