- Practice
- About 15 min
- 5 practice questions
Friction and energy loss: inclines, skids and mixed problem set
Use the energy equation with friction for rough inclines, skidding vehicles, bouncing balls and spring launches, up and down a slope.
If something looks wrong, please tell us.
Friction turns mechanical energy into heat. To solve problems with friction, add one new term to the energy equation: the work done against friction. This is always equal to the friction force times the distance along the path, and always reduces the mechanical energy. This lesson covers the standard question types with friction. Take g = 10 m/s².
The energy equation with friction
Initial mechanical energy − work against friction = final mechanical energy. The work against friction is f × d, where f is the friction force and d is the length of the actual path (not the height or the horizontal distance). When the friction force is given by f = μ N, on a horizontal surface N = mg, and on an incline N = mg cos θ.
Worked examples
Example 1 (rough incline). A 2 kg block slides 4 m down a 30° incline from rest, with a friction force of 6 N. The height fallen is 4 sin 30° = 2 m, so the loss in potential energy is 2 × 10 × 2 = 40 J. Work against friction = 6 × 4 = 24 J. Kinetic energy at the bottom = 40 − 24 = 16 J. So ½ × 2 × v² = 16, v² = 16 and v = 4 m/s.
Example 2 (a skidding car). A car moving at 20 m/s locks its wheels and skids to rest on a road where the coefficient of friction is 0.5. The friction force is μ m g, so μ m g d = ½ m v². The mass cancels: d = v² ÷ (2 μ g) = 400 ÷ (2 × 0.5 × 10) = 40 m.
Example 3 (a bouncing ball). A 0.5 kg ball dropped from 10 m rebounds to 6 m. Mechanical energy lost = 0.5 × 10 × (10 − 6) = 20 J. The fraction lost = 4/10 = 40%. The energy is lost as heat and sound in the collision with the ground.
Example 4 (spring, then friction). A spring of constant 400 N/m is compressed by 0.1 m and launches a 1 kg block on a horizontal surface with μ = 0.2. The stored energy is ½ × 400 × 0.01 = 2 J. Friction force = 0.2 × 1 × 10 = 2 N. The block stops after a distance d where 2d = 2, so d = 1 m (assuming the block leaves the spring at its natural length and the surface is rough all the way).
Example 5 (up and down an incline). A 1 kg block is projected up a 30° incline at 8 m/s. A constant friction force of 3 N opposes the motion. Going up a distance d: the retarding forces are mg sin 30° = 5 N and friction 3 N, so 8d = ½ × 1 × 64 = 32 J, giving d = 4 m. Coming back down the same 4 m, gravity does 5 × 4 = 20 J of work while friction does −3 × 4 = −12 J. The kinetic energy at the bottom = 8 J, so ½ × 1 × v² = 8 and v = 4 m/s. The block returns more slowly than it left (4 m/s instead of 8 m/s), because friction acted on both journeys.
Common traps
- Using the height instead of the path length for the friction term.
- Forgetting that friction acts on both the upward and the downward journeys.
- Using N = mg on an incline instead of N = mg cos θ.
- Treating the energy lost in a bounce as if it were lost over a distance.
Work against friction = friction force × path length. Mechanical energy lost = friction work. Stopping distance on a rough level surface: d = v² ÷ 2μg.
Key takeaways
- Add the friction loss to the energy balance: initial energy − f d = final energy.
- Friction always reduces mechanical energy; use the path length.
- On a level surface the stopping distance is v² ÷ (2μg), independent of the mass.
Check your understanding
-
1. A 2 kg block slides from rest 4 m down a 30° incline against a friction force of 6 N (g = 10 m/s²). Its speed at the bottom is:
- 4 m/s
- 2 m/s
- 8 m/s
- 6 m/s
Show answer
Answer: A. PE lost = 2 × 10 × 2 = 40 J. Friction work = 24 J. KE = 16 J, so v = 4 m/s.
-
2. A car at 10 m/s skids to rest on a road with μ = 0.25 (g = 10 m/s²). The skid distance is:
- 10 m
- 50 m
- 40 m
- 20 m
Show answer
Answer: D. d = v² ÷ (2μg) = 100 ÷ (2 × 0.25 × 10) = 100 ÷ 5 = 20 m.
-
3. A ball dropped from 10 m rebounds to 6 m. The percentage of its mechanical energy lost in the bounce is:
- 6%
- 40%
- 60%
- 4%
Show answer
Answer: B. Energy is proportional to height, so the loss is (10 − 6)/10 = 40%.
-
4. A spring storing 2 J launches a 1 kg block over a horizontal surface with a friction force of 2 N. The block travels:
- 0.5 m
- 2 m
- 4 m
- 1 m
Show answer
Answer: D. Friction work 2 × d equals the stored energy 2 J, so d = 1 m.
-
5. A 1 kg block is projected up a 30° incline at 8 m/s with a constant friction force of 3 N. It returns to its starting point with speed (g = 10 m/s²):
- 8 m/s
- 6 m/s
- 4 m/s
- 2 m/s
Show answer
Answer: C. It travels up 4 m, since 8d = 32 J. Coming down, KE = 5 × 4 − 3 × 4 = 8 J, so v = 4 m/s.
Sign in to keep track of the lessons you finish.