• Practice
  • About 16 min
  • 5 practice questions

Potential energy and conservation of mechanical energy

Use gravitational and spring potential energy together with conservation of mechanical energy to find speeds and heights.

If something looks wrong, please tell us.

Potential energy is stored energy due to position or deformation. When only conservative forces such as gravity or an ideal spring do work, the total mechanical energy, KE + PE, stays constant. This gives quick answers to falling, swinging and spring problems.

Formulae

  • Gravitational PE near the Earth: U = mgh (h measured from a chosen reference level).
  • Elastic PE of a spring stretched or compressed by x: U = ½kx².
  • Conservation: KE₁ + PE₁ = KE₂ + PE₂ (no friction or air drag).
  • If friction acts, the energy lost equals the work done against friction.

Worked examples (g = 10 m/s²)

Example 1. A ball is dropped from 20 m. At the ground, all PE has become KE: mgh = ½mv², so v = √(2gh) = √400 = 20 m/s. The mass cancels.

Example 2. A spring of constant 200 N/m is compressed by 0.1 m. Stored energy = ½ × 200 × 0.01 = 1 J. If it launches a 0.5 kg block, ½ × 0.5 × v² = 1, so v = 2 m/s.

Example 3. A pendulum bob of mass 0.2 kg is released from a height of 0.8 m above its lowest point. Speed at the lowest point = √(2 × 10 × 0.8) = 4 m/s.

Example 4. A 2 kg block slides down a rough ramp from a height of 5 m and reaches the bottom at 8 m/s. PE lost = 2 × 10 × 5 = 100 J. KE gained = ½ × 2 × 64 = 64 J. Energy lost to friction = 100 − 64 = 36 J.

Without friction: ½mu² + mgh₁ = ½mv² + mgh₂. Spring energy = ½kx². Speed after falling h from rest: v = √(2gh).

— Remember

Key takeaways

  • Mechanical energy is conserved only when no friction or drag does work.
  • Only height differences matter for gravitational PE.
  • The speed from a free drop does not depend on mass.

Check your understanding

  1. 1. A ball is thrown vertically upward at 20 m/s. Ignoring air resistance, how high does it rise? (g = 10 m/s²)

    1. 20 m
    2. 40 m
    3. 10 m
    4. 2 m
    Show answer

    Answer: A. ½mu² = mgh, so h = u² ÷ 2g = 400 ÷ 20 = 20 m.

  2. 2. How much energy is stored in a spring of constant 400 N/m when it is compressed by 0.05 m?

    1. 10 J
    2. 1 J
    3. 0.5 J
    4. 20 J
    Show answer

    Answer: C. U = ½kx² = ½ × 400 × (0.05)² = 200 × 0.0025 = 0.5 J. 10 J and 20 J forget to square x.

  3. 3. A spring of constant 800 N/m is compressed by 0.1 m and launches a 0.5 kg block on a smooth floor. What is the block's speed when it leaves the spring?

    1. 2 m/s
    2. 8 m/s
    3. 4 m/s
    4. 16 m/s
    Show answer

    Answer: C. Stored energy = ½ × 800 × 0.01 = 4 J. All of it becomes KE: ½ × 0.5 × v² = 4, so v² = 16 and v = 4 m/s.

  4. 4. A 1 kg block slides from rest down a rough ramp 4 m high and reaches the bottom at 6 m/s. How much energy was lost to friction? (g = 10 m/s²)

    1. 22 J
    2. 18 J
    3. 40 J
    4. 58 J
    Show answer

    Answer: A. PE lost = 1 × 10 × 4 = 40 J. KE gained = ½ × 1 × 36 = 18 J. Energy lost to friction = 40 − 18 = 22 J.

  5. 5. Two balls, one light and one heavy, are dropped from rest from the same height h. Ignoring air resistance, which statement about their speeds on reaching the ground is correct?

    1. The heavier ball is faster
    2. The speed is directly proportional to h
    3. The speed is directly proportional to the mass
    4. They are the same for both balls
    Show answer

    Answer: D. From mgh = ½mv², v = √(2gh). The mass cancels, so both have the same speed, and the speed grows as √h, not in direct proportion to h.

Sign in to keep track of the lessons you finish.

Next lesson → Power and electrical energy units

Privacy · Terms · Refunds · Delivery