• Practice
  • About 14 min
  • 5 practice questions

Power problems: lifts, pumps, vehicles and the P = Fv shortcut

Solve problems on power in lifts, pumps, vehicles and electrical appliances, including efficiency and accelerating motion.

If something looks wrong, please tell us.

Power is the rate of doing work. Problems on it come in a few standard types: lifting a load, pumping water, driving a vehicle, and running electrical appliances. In each, one of two formulae does the work: P = W ÷ t, or P = F v when a force acts along the velocity. This lesson shows how to choose and use them. Take g = 10 m/s².

Formulae and units

  • Average power = work ÷ time. Unit: watt (W) = joule per second. 1 kW = 1000 W.
  • Power of a force moving a body at speed v along the force: P = F v.
  • Efficiency = useful output power ÷ input power × 100%.
  • Electrical energy: 1 kWh = 1 kW × 1 h = 3.6 × 10⁶ J. Energy in kWh = power in kW × time in hours.

Worked examples

Example 1 (a lift). A lift of mass 500 kg (with its load) rises at a steady 2 m/s. The cable force equals the weight, 5000 N. P = F v = 5000 × 2 = 10 000 W = 10 kW. If instead the lift is speeding up at 1 m/s² when its speed is 2 m/s, the force is m (g + a) = 500 × 11 = 5500 N, so P = 5500 × 2 = 11 000 W = 11 kW.

Example 2 (a pump). A pump lifts 1800 kg of water every minute through 10 m. Work per minute = 1800 × 10 × 10 = 180 000 J. Output power = 180 000 ÷ 60 = 3000 W. If its efficiency is 75%, the input power = 3000 ÷ 0.75 = 4000 W.

Example 3 (a car at steady speed). An engine delivers 20 kW to the wheels while the car moves at a steady 20 m/s. The driving force is F = P ÷ v = 20 000 ÷ 20 = 1000 N, which balances the resistance. At 25 m/s the same power gives F = 20 000 ÷ 25 = 800 N.

Example 4 (accelerating from rest). A 1000 kg car with negligible resistance is pulled by a constant driving force of 2000 N, so a = 2 m/s². After 5 s its speed is 10 m/s and the power at that instant is P = F v = 2000 × 10 = 20 kW. The average speed over the 5 s is 5 m/s, so the average power is 2000 × 5 = 10 kW. The power rises steadily, since the speed does.

Example 5 (a person climbing). A person of mass 60 kg climbs a staircase 12 m high in 30 s. Work = 60 × 10 × 12 = 7200 J. Power = 7200 ÷ 30 = 240 W.

Example 6 (electrical energy). A geyser rated 1.5 kW runs for 20 minutes. Energy = 1.5 × (20/60) = 0.5 kWh. At an assumed price of ₹7 per unit (a rate used only for practice), the cost is 0.5 × 7 = ₹3.50.

Common traps

  • Using P = F v with the force not along the velocity, or forgetting the acceleration term in F = m(g + a).
  • Converting minutes to seconds before dividing.
  • Confusing input and output power: efficiency compares the two.
  • Giving kWh as a unit of power. It is a unit of energy.

P = W ÷ t = F v. Efficiency = output power ÷ input power. 1 kWh = 3.6 × 10⁶ J.

— Rule to remember

Key takeaways

  • Choose P = W ÷ t for lifting and pumping, and P = F v for vehicles and steady motion.
  • In an accelerating lift, the cable force is m(g + a).
  • Power at an instant uses the instantaneous speed; the average power uses the average speed.

Check your understanding

  1. 1. A crane lifts a 400 kg load at a steady speed of 3 m/s (g = 10 m/s²). The power needed is:

    1. 1.2 kW
    2. 4 kW
    3. 12 kW
    4. 120 kW
    Show answer

    Answer: C. F = mg = 4000 N. P = F v = 4000 × 3 = 12 000 W = 12 kW.

  2. 2. A pump delivers 3 kW of useful power and has an efficiency of 75%. Its input power is:

    1. 2.25 kW
    2. 4 kW
    3. 3 kW
    4. 3.75 kW
    Show answer

    Answer: B. Input = output ÷ efficiency = 3 ÷ 0.75 = 4 kW.

  3. 3. An engine delivering 30 kW moves a car at a steady 15 m/s. The driving force is:

    1. 450 N
    2. 2 N
    3. 4500 N
    4. 2000 N
    Show answer

    Answer: D. F = P ÷ v = 30 000 ÷ 15 = 2000 N.

  4. 4. A 750 W iron is used for 4 hours. The energy used is:

    1. 3 kWh
    2. 750 kWh
    3. 0.19 kWh
    4. 30 kWh
    Show answer

    Answer: A. Energy = 0.75 kW × 4 h = 3 kWh.

  5. 5. A 1000 kg car, with no resistance, is accelerated from rest by a constant force of 2000 N. The power at t = 5 s is:

    1. 4 kW
    2. 10 kW
    3. 40 kW
    4. 20 kW
    Show answer

    Answer: D. a = 2 m/s², so v = 10 m/s at 5 s. P = F v = 2000 × 10 = 20 kW.

Privacy · Terms · Refunds · Delivery